I can hardly see at night when i switch on the low beam light on my 09 Camry. How I can make them a little brighter. Have difficulties seeing when i meet another vehicle and have to change to low beam at night.
View 7 Repliesmy high beam switch works if I hold the switch in the forward position, but it won't stay on when I let go. Is there a fix without having to replace the switch?
View 4 RepliesMy A/C works fine, but the A/C switch light is not working. So i don't know if A/C on&off when i drive in the evening. Which part I need to replace and what is the part number?
View 7 RepliesMy car is having a problem of passenger side light (low beam) being always on even after turning the switch or engine off. I have to unplug it to prevent it from draining the battery.
I am not too familiar with electrical system on the Prius, but suspect bad relay or something related. Where the relay for the headlight is?
2006 Lexus GS300 AWD, My driver side low beam HID turns off at night while driving. Both lights come on, then after driving for about a few mins, the driver side low beam hid will go out. Then, if I quickly turn the lights off, and back on, it comes back on and stays on for another few mins. Repeat. Sometimes it will eventually stay on for the rest of the trip.
View 5 Replies2009 Camry LE: my rear brake light doesn't work when braking (fully lit), but it works okay for night-time mode (dimly lit).
This problem is affecting just the right side. The left side is okay for both braking (fully lit) and night-time mode (dimly lit).
Troubleshooting: my deduction led me to believe that my bulb is not burnt out and the wiring harness and fuse are okay because the bulb can be lit during night-time mode, just not when braking. I also think that my brake pedal switch is okay because my left-side brake light is fully lit when braking. I can only speculate it's a circuitry/logic board problem of some sort; I'm just not sure where I can locate the problem.
Did a search and read the manual and I cant seem to turn of the dome lights when I open the doors. For example... Sometimes my daughter falls asleep and I want to open the door at night without the lights coming on... Or If the mosquitoes are going crazy I might want to turn off the light so I don't get killed... I know I can hold the switch to the right and it turns lights on with doors closed, and hold for a second to the left to turn off. But what about opening the door? I know my old 2007 was able to do this function...
View 13 RepliesI bought a 2009 Accent last week after my 1987 Camry wagon bit the dust. It has 47000 km and seems to have been very well maintained. The only problem I have noticed is that the high beam indicator light does not come on, although the hi beams do work. I downloaded an owner's manual but am not sure which fuse the indicator light is on; in any case, everything else seems to be working so I expect the bulb is burned out. My problem : I don't know its location on the instrument panel since it has never worked, and I don't know if it is possible to replace it without special tools.
View 2 RepliesOn my 09 Camry LE most of the time at least once or twice when driving at night with the headlights in AUTO mode if you go to hit the turn signals to switch lanes or make a turn the switch will change to either the off position or on position. This is especially annoying as if you do not realize the headlights are on you can park and leave them on draining your battery.
I have driven plenty (hundreds) of Gen 6 Camry's and have never experienced this. My Corolla switch has never so much as hinted at moving although it only stays in the off position since DRL are always active but anyway. If I am going to replace the switch might as well opt for the XLE/SE switch for my fog upgrade.
My wife has a 2009 Camry LE, 4cyl with approximately 63,000 miles on it. Yesterday when driving it, I went to turn the cruise control off and my finger slipped, causing the button to pop out. Both of us have tried to fix it and I know I tried at least three or four different ways to reinstall the little three prong copper piece and no luck. The cruise control still refuses to work.
Having problem with the button popping out and been able to fix it? If so, how did you fix it? I hope it's something simple, such as re-installing the copper piece a certain way.
I recently melted (due to my own ignorance) the backshell that holds the low beam light bulb in place. I can see that the backshell is removeable since there's it looks like there's 3 screws that hold it in place. The headlight would have to be baked apart, but I already know how to do that. My question is: is there anywhere that sells this part, or does the housing assembly have to be bought whole? I was also looking at the spyder lights that claim they are projectors, but I'm wondering how they compare to regular OEM output. This is for a hybrid btw
View 1 RepliesI have a 2006 Toyota Camry SE 4 cylinder. When I turn on the headlight sometimes the light from the shifter doesn't light up. I have to tap it a few times for the light to come on. This happens to the passenger side low beam as well. When I turn on the light sometimes the passenger side low beam doesn't light up I have to go out and tap the headlight a few times for it to work. What can be the cause?
View 2 RepliesHave a 2005 Grand Cherokee, problem when lites are on high beam & I switch to low beam the lites turn off.When I flick the switch they come back on. Also when signaling or wipers are on sometimes lites start flashingand or go out. Any clues?
View 2 RepliesSo, last night I go to turn on the high beams on my 2002 Passat (pushing the bar on the left of the steering column forward) ... and nothing happens. The bar clicks into place as it should, but no high beams. The little indicator light on the dashboard does not come on, either.
I try to flash my high beams, and that DOES work. The brights come on, and the little indicator lights up when the beams engage.
So ... I know it's not a fuse, since the lights are actually functioning. What part/switch/relay/whatever needs to be replaced to get this fixed? I feel like this would involve me needing to pull apart the mechanism in the steering column, but I hope not ...
Just discovered that both high beams are not working. Regular lights ok. When switch to high beam both go off. I know some bulbs have two filaments, is this the case for this car? Are the bulbs burnt out or something else is wrong?
This is a 2007 Jeep Wrangler Rubicon Unlimited.
S4. The a/c light on the dashboard switch (2002 V6) started flashing when the light should be solid steady light plus No Cold Air. I Google it and it directs me to several sites, people are saying just change the cabin filter and that often fixes it and if not change the a/c relay (disconnect the battery first they pointed out).
I got a new cabin air filter from O'Reilly for $14. (The PurolaterC35479 "breathe easy" fits 2002-2007 camry) To change it just empty your glove box and leave the door down. On the right side of the glove box hinge there's one philips screw. Remove that and wobble down the right side then pull out the glove box door.
Look straight in at the firewall behind that now you can see the slot the filter goes in its about 1" high by 8" wide. Yank out the old filter and carefully note the orientation of it as it comes out. Shove in your new filter. Replace glove box.
The light did not go out at first. It took about ten minutes running the fan turning the a/c switch off and on while driving but the a/c light finally stopped flashing and changed to a solid green light again, and the cold air came back.
I just recent bought a 2012 Toyota Camry LE and it seems to have had fog lights installed (not stock ,as far as my research has proven) and the LED on the switch is green and never shuts itself off. I'm not sure if this is normal. I have a decent mechanical background and never see anything other than security lights on when the key if off and out of the ignition. Seems like it may be a little wrong wiring. I checked the DIY OEM install of the fog lamps, but nothing there stood out to me as a cause for the light to remain on.
View 1 RepliesCamry 2002 XLE 4Cyl. 2.4 ... When I switch ignition key on, there are no ABS and Brake light come on. Why is that happening? How to fix it? Normally, when we switch ignition key on, what are indicator light on?
View 6 RepliesWhere they've hidden the switch that turns the trunk light on--and the switch that lights up the instrument panel warning light that the trunk is open, and that causes that annoying bleating when you're driving with the trunk unlatched?
I have a 10' kayak that I slide into the trunk for a 1/2 mile drive down my private road to the dock and I'm sick of listening to that warning beep--hoping I can put tape over the switch or something to shut it up.
So I recently bought a 1997 7.3l F250. It is in fairly good condition, but it has some problems with the lights working. The turn signals and hazards all work, as do the tail lights and headlights. However, when I hit the high beam switch, the headlights cut off entirely. Also, the brake lights do not work at all. Ive checked the bulbs and since they all work Im not sure what the issue is.
View 3 RepliesMy wife's 2010 Lariat, has a problem with the heater switch. Its stuck in one speed.
Also the rear defogger switch doesn't light up. We don't know if the switch to it is just bad, OR if the whole system is bad.
Was also wondering if the blend door would be bad??