My 09 Camry was involved in a frontside impact crash about 2 years ago, I've had the car fixed since then by a body shop. However, my airbag light has been on for several months and will not go off. I've even had someone at a local garage try to turn it off, but it did not work.
Today a friend of mine used a clip to read the airbag code, and we got the code 31. I'm not sure what this means though.
I have a 2009 Toyota Prius. The airbag/srs light came on a couple weeks ago and would come and go. Eventually it came and did not go. This didn't really bother me as I don't drive it much anymore and I figured it would be gone by the next time I went to start it up. (I also heard about connections under the seat being loose and hoped that was the problem.) Well I was wrong. Today I noticed it was still there so I decided to start diagnosing. I jumped the connector as my obd2 scanner only reads regular and abs codes (not srs apparently).
The only code that came up was 51. Which is the driver side squib circuit. Many say that code 51 usually just ends up being the spiral cable. I simply find this odd as every button on my steering wheels works. Cruise control works fine etc. Idk how only 1 or 2 wires get messed up in that thing and how they turn out to be the ones for the airbag but I suppose its possible. My next step is to take a continuity tester to the 2 plugs that connect to the airbag to see if they are getting power.
Corolla has this code : B1801
When i erase it comes right back!
Open in (D) Squib Circuit. What to start looking for?
I have a Air Bag Light on and Code B1811 2007Camry, same thinking clock spring?
View 1 Replies06 Camry, ~130K miles.
So the Airbag warning light in my Camry has been coming on (and staying on) intermittently, but would turn off if I turned off the car and restarted it. May take a cycle or two, but it would turn off.
Took it to the dealer, they isolated to the passenger side seat. They cleaned contacts, reseated connectors etc.. and the light stayed off for a while. By the way, there appears to be no relationship to anyone sitting in the passenger seat, or not, at the time.
Happened again maybe 3 weeks later. Same thing was done at the dealer.
Took it in today with light on, they pulled the code B1826 (Description: OPEN IN SIDE SQUIB (P SEAT SIDE) CIRCUIT)
This is my wifes car (and kids) so no airbags isn't an option. According to the documentation I got from the tech at the dealer, the Detecting Condition is:
The airbag sensor assy center receives an open circuit signal in the side squib (P seat side) circuit for 2 seconds.
Side squib (P side seat) malfunction
Airbag sensor assy center malfunction
The "Trouble Area" information:
Front RH seat assy (Side squib (P seat side))
Airbag sensor assy center
Floor wire No. 2
On three different occasions in the past month I noticed air bag light on in my 13 supercrew. Code comes up as B0091 drivers door crash sensor. This truck was bought new and only has 13000 miles on it so my gut is telling me it's something to do with the harness that is at the door hinge. I've carefully inspected the wires and do not see any obvious broken wires but that doesn't mean one of the wires isn't breaking on the inside.
View 3 Replies2004 Chevy Suburban 4wd
My airbag light is on and my code reader, Innova 3160d, is telling me that the B0083 code is the Second Row Left Seatbelt Load Limiter Deployment Control (Subfault).
I Googled the code and came up with 1) passenger seat position sensor, and 2) front impact sensor 1 (driver's side).
Which one is correct?
I have a 2007 Toyota Camry LE, and the seat belt light keeps on flashing and the airbag light is solid. We have tried literally everything possible, tried replacing the seat, replaced the seats sensors, tried a airbag module out of another 07 camry with exact same part #. Toyota have diagnosed that all the systems for airbag is fine, except it has something to do with the seat belt of the drivers side/or module but all that's been checked and still no luck. My car is due for Safety inspecting coming month and need this to fixed. How to handle this. Btw light came on because we had a blown fuse for the drivers power seat, and my mechanic thought that it was the motor so we replaced the seat and noticed that it wasn't the motor. Was just the fuse and we put back the original seat and everything is functional except the lights came on. No accidents on it to the extent i know. and the wiring is all plugged back properly without anything like wiring damage.
View 9 RepliesMy airbag light went on so i scanned for codes and I got:
00592-seatbelt switch:right (e25) 32-00-resistance too high.
What I need to do to fix this and make the light go away?
Several weeks ago my 2010 Prius (actually bough 8/09) started displaying an intermittent airbag warning light. This is the red one on the right side of the display. Brought it in to the dealer, as the warranty on the SRS system is 5 years. They charged me a diagnostic charge of $96.00 because they claimed that although the SRS is covered under warranty, the diagnostic system was not. They did the work, and should get paid, but I am still after Toyota to pay them, and refund me. In any case the diagnosed code was B1826, which is an open in the side squib left hand circuit. In other words, a poor connection, or one with more resistance than the computer expects to see. They recalibrated the system and claimed it was fixed. However, two weeks later, it's back again.
View 6 RepliesAirbag light came on. Finally got a scan tool that will read it. Comes up with an active code of B1481 (Driver's airbag 2nd stage resistance too high). The scan tool shows 1st stage resistance at 2.6 ohms and 2nd stage at 6.6 ohms. My understanding is that it could be a faulty airbag or clock spring. How to further diagnose the condition?
View 6 RepliesI bought a used 2005 Elantra a couple years ago for my teenagers. The airbag light came on, so I took it to the dealer. The code they found is B1448. They said they need to replace the passenger side seat cushion module. (I think the value of the whole car can't be much more than that!).
View 2 Replies2003 Santa Fe GLS 120K mi. 2wd, 2.7L, AT.
Been having for some time an intermittent problem where the air bag light will come on and not clear. I can clear it sometimes by removing the neg. batt. term. and letting it sit for a few minutes. The "air bag" light always seems to come on when someone sits in the passenger seat. The dealer reported a trouble code of "B1382-- PSAB harness improper pin tension" They said that they re-seated a connector and it was good to go. Now the "air bag" light is on again. Does the description refer to the pin tension in a connector? which connector does it refer to and can I just tighten up the female part of the connector such that the male pin makes better contact? Is it the yellow connector under the seat?
The airbag light on my 1995 Ford Ranger is flashing a code 41 (four flashes, pause, then one flash...does this a few times when I start the engine, then goes to a solid light which stays on while I drive.) It has been doing this for several months, and to be perfectly honest, this has not been a concern for me but now that my state inspection is coming up in December, I need to do something about it. Just before I noticed it to begin with, I had a major repair done--the dreaded heater core replacement--which involved removal of the dashboard. I never associated the flashing with that repair and the possibility that the repair shop might have inadvertently neglected to reattach something when reassembling the dashboard and now so much time has passed, that I can't just go back to the repair shop.
View 4 RepliesMy son has a 99 Ranger where the airbag light is flashing code 32. I had the same code on my F350 and it was the clock spring. What it could be. It is 99 Ranger with 2.5l, auto trans, 2wd, no CC.
View 2 RepliesSo I swapped in a new cluster fx4 to stx to get my airbag light to work. It now works but flashes code 25. Is code 25 the passenger airbag deactivation switch?
View 2 RepliesGot an air bag code 41. Comes on and flashes the code a number of times, then goes off for the rest of the ride. It is a 96 Arerostar, XLT, 4LV6. From what I read it is a short someplace. Where are the crash sensors and how do you check them for "shorts"? I don't understand much about the whole system.
View 12 Replies1997 F150 - Getting an airbag code 33. PAD light is still functional. Some googling suggests a sensor in the passenger seat belt but I think mine is too old for that.
View 3 RepliesI just did TSB036-07 on my 07 I4 for the sluggish problem. It turns out very good. Now I got another problem right after that fix, the "Passenger Airbag Off" light is always on even with an adult (over 150 lb) sitting there. I suspect they touched some wires during the TSB service. I will certainly take it back to the dealer and report it back to you. Searching the forum, I saw one reported that the ECU has to be replaced to fix it.
View 5 RepliesI went to start my 2004 Camry one freezing night and out of no where my airbag light came on. The bags didn't deploy I'm just lost and want it fixed? I don't know it's its a fuse or a sensor?
View 4 RepliesI have a 2013 F150 STX with an air bag light that comes on randomly, I have had the truck in 3 times so far to get it checked out and they keep replacing a sensor in the driver door. Part number BL3Z 14B345A. The sensor has been replaced twice so far and the light still comes on randomly. I took the truck in again on 11/17/2015 and was told to bring it back when the light is on and stays on. I think we all know that if the light comes on and I do manage to get it to the service department during business hours that I will not be rushed to the front of the line and they will park the truck turn off the ignition and the light will go out.
The truck also has a couple of other little glitches. Every once in awhile at start up the radio will just pop or crackle through the speakers this will last for about 2 blocks then the radio works fine after that. The speakers will also cut out randomly while sitting at a stop light. I guess since Ford don't know how to fix there trucks. The truck is still under warranty but it is getting close to the mileage cutoff.