Camry :: 2007 Toyota Glove Box Lock Replacement
Apr 28, 2012
How to replace the glove box lock in a 2007 Toyota Camry. I'm referring to part # 7 or 8 in the diagram below.
View 1 Replies
Apr 28, 2012
Advertisement
Camry :: 2007 Toyota 2.4 Simply Not Starting After Head Gasket Replacement
A 2007 Toyota Camry 2.4 was brought into the shop I work at smoking badly and running terrible. The car had been run hot because the radiator was busted and it blew the head gasket. So I pulled the head and sent if off to the machine shop to have it checked. They said it was badly warped across three cylinder and they resurfaced it.
Now I have everything re assembled, but it simply will not start. All the timing marks on the timing chain line up where they should be. All four coils are firing. Injectors wires pulse noid lights. A few times it has hit and sputtered like it was trying to start but never successfully does.
Yaris/Scion & Vitz :: 2001 Toyota Echo - Ignition Lock Cylinder Replacement
The previous owner broke the key off in the ignition so I replace the ignition lock cylinder the problem is though even with the old one I can't turn the key to lock so it's stuck on acc. What I can try without replacing the entire column? Also it needs a catalytic converter, do I have to weld a universal one on ?
View 1 RepliesToyota :: How To Lock Trunk On Camry
How to lock the trunk on the Camry? I used to be able to lock the trunk with the main key, and give the valet guy just the valet key. No I cant seem to find the lock on the trunk.
View 1 RepliesToyota - Camry :: Doors Will Only Lock And Will Not Unlock
My camry has been giving me this issue for last couple of weeks. The door will lock correctly using the key fob and by pressing the buttons on door of drivers + passenger. But while trying to unlock only the driver lock unlocks.
The car does not has any starting problems and I even tried a secondary battery to see if its a battery issue. The issue remains the same even the car is started or moving i.e. doors will only lock and will not unlock.
Someone said the Relays might have a problem and I was able to locate the two relays in the fuse box but I am not sure which one to pull out.
Prius (Gen 1) :: Blower Motor Replacement / Way To Get It Under Glove Box?
How to replace blower motor in 01 Prius. There are no way to get from to it from under the glove box.
Blower motor was working fine. I decided to remove cabin filter. Filter had not been changed for very long time. There was a lot of dirt, pine straw and leaves on top of the filter. When I removed the filter a lot of dirt fell inside the motor. Ever since then motor is working on and off. Often have to hit under the glove box and it works again for a while. Tried to remove the blower but could not get to it.
Toyota - Camry :: 2009 - Automatic Doors Lock Don't Work At All
I have Toyota Camry 2009 . My automatic lock doors stopped working at all. But it was long process, first all passengers doors sometimes opened, sometimes closed(I mean button on the doors didn’t open or close doors, remote control also didn’t open or close doors). Then they stopped function. 1 month later drivers door stopped working too. Now I can use only old fashion way. I made my research and I think I have to replace body ECU because it response for automatic door locks(but it cost a lot). What it could be?
View 7 RepliesToyota - Highlander - Hybrid :: 2007 - Won't Move Like Wheels Lock On?
Driving a 2007 toyota highlander hybrid? this car has done well until just this last year. I think the auxiliary 12 volt battery and rest of engine has issues. I replaced the 12v battery in 2012 so it's still good, but when I go out of town for over 7 days and the car isn't started, it is dead when i return. So I charge it up but then the car won't move when started and put into gear. It acts as if a wheel lock is on it. I got a hold of an innovus code scanner and no codes appear. I don't know what to do. I have come across some posts on other forums where owners did have battery issues with these cars, not the fault of the 12v battery but just the car and how it's built, vis a vis the 12v batt. I had the ipm (inverter component) replaced on recall in march of this year. the above issue with the battery had just begun a month prior, so i thought that following the recall all would be well. but it isn't...
View 10 RepliesCamry :: 2004 Toyota - Shifter Bulb Replacement
Life long fan of Toyota cars. Drove all cars above 250 K miles. The only way I lost them is through minor accidents or just donated them. Just got a 2004 toyota Camry with 165 K miles( it may sound a lot for others , for me its just beginning) . The Shifter light is out. How to replace it.
View 2 RepliesToyota - Camry :: 2005 - Anti-Lock Brake Noise And Vibration
I was driving my Dad's Camry in the rain and at one stop I heard what sounded like the anti-lock brake noise and vibration. Heard it again when stopping on leaves. Didn't think much of it until I started noticing the same noise when the road was dry and clear. All the stops were gradual, from under 30 mph. The car stops fine, less the noise. I hear the noise approx 1 stop of 3 or 4 regardless of road conditions or weather.
What's the cause? Since it relates to the braking system is this something I should have the shop look at asap? This is a 2005 but with under 60,000 miles. Has been well maintained.
Toyota - Camry - Celica - Transmissions :: 2011 - How To Disable Door Lock Automation
For a 2011 Camry, how can the automatic door locks (shifting to park/unpark be disabled?
View 1 RepliesToyota - Camry-hybrid :: AC Won't Blow Cold Air After Drive Belt Replacement
My drive belt broke and I replaced it with a new one and now ac wont blow cold air. It was working fine before. I can hear the compressor running but not blowing cold air.
View 1 RepliesCamry :: 2009 Toyota - Front Brakes Clunking / Knocking After Replacement
I changed the front brake rotors & pads on my wife's 2009 Toyota Camry & everything seems fine except when doing sudden or slightly hard stops it seems to do a clunk/knock type sound from the front brakes. It also only does it sometimes not every hard/sudden stop.
One thing that comes to mind is that when I went to tighten one of the guide pin bolts it was a real pain, the big bolt that the screw threads into kept spinning making it hard to tighten the bolt into & none of the others did this. I thought I tightened it down but possibly not?
Toyota - Camry :: 2006 - Water Pump And Serpentine Belt Replacement
Is it possible to change the water pump and serpentine belt in a 2006 Toyota Camry with 4 cyl. engine in less than an hour?
View 4 RepliesCamry :: 2007 - Car Beep Three Times After Remote Lock
My 07 Camry SE just started doing this. I turn off the vehicle. Lock the car with the remote. After a few minutes, the car beeps 3 times. I've checked all the doors, windows, lights. Everything is closed or off. It keeps beeping 3 times after every few minutes. This Camry does not use a smart key.
View 2 RepliesCamry :: 2007 - How To Disable Steering Wheel Lock
How to disable or completely take out the steering wheel lock. The part where the gear goes into the disk to lock the steering wheel into place. I heard it was simple and yes I have been looking around but I still can't seem to figure it out.
View 10 RepliesToyota - Fuses - Yaris :: 2007 - A/C Not Blowing Cold After Total Engine Replacement
In January I had to replace my engine in a 2007 Toyota Yaris. Last week we had the first day, since the engine replacement, that I needed to use the air. The fan blows air, it just isn't cold. Could this be anything to do with the engine replacement? Maybe they didn't hook something up properly? Do the drain the coolant to the ac when they take out the engine? I have been reading that it may simply be a fuse or needs to be charged. I realize I should have checked the a/c when I picked it up, but at -8 below, air conditioning doesn't cross your mind.
View 6 RepliesCamry :: 2007 / Headlight Assembly Replacement?
I'm trying to replace my dads 2007 Camry XLE japan built headlight assembly because his are insanely oxidized. Besides OEM's and CAPA's, what else are there? Any good aftermarket headlight assembly and achieve great results?
View 8 RepliesCamry :: 2007 - Vibration After Engine Replacement
I'm trying to pin point the cause of this vibration on a recently replaced engine. 2007 camry 2azfe 2.4L manual
The engine runs fine at idle and drives as it should. However.. there is now a noticeable vibration and sound coming from the replacement engine that wasn't there before on the original engine
The sound seems to be coming from the intake side of the cylinder head. the sound and vibration/rumble seem to increase as rpms increase. All the engine mounts are good. it's not a rattling sound.. double checked to make sure nothing was loose.
When I received the replacement engine I didn't check the internals. the engine supposedly has around 40k miles. came in as a complete longblock. I did note that the cylinder did have some blue colored dye inside the intake and exhaust ports. I dont know what this engine went through before i got it.
It almost sounds like a loud aftermarket intake when you step on the gas. Its extremely annoying driving down the road.. because of this constant vibration/hum/rumble.
Camry :: 2007 - Headlights Not Automatically Turning Off When Used Key Fob To Lock The Doors
Why my headlight is not automatic turning off when i used the keyfob to lock the doors? it used to turn it off right the way (that's what I rememeber) but now I lock the door by the remote and its still on for like 5 min.. isn't normal!
View 2 RepliesCamry :: 2007 SE Cruise Control Switch Replacement
My girlfriend and I were riding in her 2007 Camry SE about a week ago on the highway. She pushed the button on the cruise control switch to turn it on, and the button popped out of the end of the stalk (it did not completely come out, but popped out about an inch). She pushed it back in, but it won't turn the cruise on now.
What all is involved in replacing this switch? I was assuming it was as simple as removing the bottom rear cover on the steering wheel and swapping it out, but I wanted to check beforehand.