Camry :: 2007 Solara Rear Seat Removal?
Jul 4, 2013
I've been able to get the bottom of the seat out, but not the back rest. i cannot figure it out. how?
View 1 RepliesI've been able to get the bottom of the seat out, but not the back rest. i cannot figure it out. how?
View 1 RepliesHow to remove the rear seat on the LS460? I need to take it out to have access to the strut tower..need to make sure it's not ripped out/loose bolts or whats not ..still trying to locate the source of that clunk when braking..still...
View 14 RepliesI'm trying to take the rear seat out of my 07 Camry se. I got the bottom cushion out but I have no clue how to get the back out. its the NON folding seat so its quite a biznatch. So far I have taken out two bolts on the bottom front of the seat and some trim/carpet in the back.
View 7 RepliesWhy when it rains my rear seat on the driver side of my 2007 camry se is soaking wet on the outer edge of the seat and outside edge of the backrest.
View 11 RepliesI have a 2007 Toyota Solara SLE Convertible. Three of my wheels are bent due to hitting various potholes over the past year as well as hitting a curb. I want to replace these wheels with other wheels of the exact same size so that I can use the tires that I already have (since I just bought them) and so that they do not rub on any other part of the wheel well or hub. I have concluded that the size is 17" x 7", that they 5 lug nuts at 114.5 mm. However, I cannot determine how to measure the offset. I have read multiple threads about which offset they are (some say 45 and others say 50). I just need a definitive answer so that I can replace them seamlessly. Its a BUMPY ride right now.
View 2 RepliesI do have heated seats and a power driver seat. I need to remove my seats in order to dye/paint my carpet. Any guide where to start with this? Seems kind of difficult.
View 5 RepliesHow difficult it is to remove the rear seat on a 5th gen 2002 Camry XLE? There's a set of leather seats at a local yard and I'm thinking of buying it.
My follow up question is what the h ell do I do with my old seats? Is there even demand on Craigslist for that stuff? They're power and in good condition.
How to take out the back seat of the Passat? I'm needing to run a Pioneer IP bus cable to the trunk and it would be easier with the bottom of the rear seat out. I looked in the archives and found a thread saying you just pull up on the bottom. I have pulled up on the bottom of the seat so hard that I'm worried that I will break it. I still can't get it out. Is there something I'm missing?
View 6 RepliesGoing to replace motor mounts. Foot on brake and placed in gear engine flexes back about 2". Doesn't seem to flex side to side or forward. Replaced dog bone the metal in the middle of the bushing had a visible crack. Still flexes. I am confused about replacing them. Should I replace all including the 2 rear mounts? This is what I have read in many posts and been told by a trans shop. Can I just replace the front and dog bone? Parts guy told me that was all that I needed to do if it wasn't flexing side to side. These things are expensive 170- ea for oems so if I don't have to replace the rear I won't. However I don't want to trash the new ones cause I didn't replace them all.
View 3 RepliesMy 2007 Toyota Solara convertible has been perfect...and now suddenly the convertible back window is leaking. My husband advised me not to drive it today due to the expected rain. OOPS. I went out, and when I made a stop, I looked at the back window and realized the bottom window (glass/plastic?) had completely separated from the fabric top. The top itself is in perfect condition.
View 2 RepliesMy uncle has an 05 F150 extended cab. When he bought it he put his license plate in the rear window until he could get some bolts for it. When it was there it fell between the back of the rear seat and the back of the cab. Currently he has one plate on the rear, but is worried he will get stopped for not having a front plate installed. So he knew I am an FTE member and I could find out how to remove the seat back. I have not tried to remove it nor seen if I could reach it.
View 4 RepliesTrying to install some nice seat covers in my '11 supercab and can't seem to figure out how to remove the rear seat back. What is the combination?
View 2 RepliesI would like information how to remove the rear seat back on a 2012 F250. I want to remove the head rests and from what I can find out they are bolted solid to the rear panel. I asked the same question earlier and got a reply for 2011, would that be the same? Is there any place I could get a schematic, a picture is worth a thousand words.
View 5 RepliesI've got a 2014 f250 xl super cab and can't for the life of me figure out how to remove the back seat back.
View 2 Replieshow to remove it.My wife backed into my truck and put a dent in the corner of it so I am hoping i can pop it out.
View 4 RepliesI have a 2007 Camry XLE V6 that needs new spark plugs and the first thing to remove is the plastic engine cover. I do not see any screws or bolts attaching it down and I would like to know the proper way to remove it without damaging it or the plugs holding it down. How to do this?
View 3 RepliesI need to change the rear brake pads on a 2007 Expedition and was going to turn the rotors also. It appears the rotor is held onto the axle by a large nut and not having done any brake jobs in several years, I've never run into a rear rotor that's bolted on. Is this the case and if so, what size socket do I need to get it off. Also, I was curious if there is anything else I need to know before I dive in. I heard it was difficult to get off.
View 7 RepliesAny easy solution to reseating this wire in the connector? It got yanked out by accident when i was removing an ignition coil under the wiring harness. 2007 camry v6
View 3 RepliesI have a 2011 camry se and i need to know how to take out the rear seats. I'm trying to put seat covers and i want to take out the bottom part so i can strap it tight. When i lift it up i can see two hooks.One hook i got out a while back when i just bought it but i cant do it anymore.i don't want to pull on it too much and risk ripping the seats.
View 9 RepliesI want to remove the rear seat bottom cushion of a 2012 Camry L, to put on some seat covers. Do I just grasp the front center of the cushion and pull up, or will that break something?
View 7 RepliesI was driving home today and randomly thought to open the vents in the b pillars and noticed that neither rear vents were flowing any air. I opened and close them and I tried every mode on the AC, and even tried turning the rear vents from the arm rest to the back seat off. Any clue as to what the deal is?? I just cant imagine what the issue is. I have never used the vents in three years of ownership but would like to think that I have the option.
View 3 Replies