Camry :: 2007 - Headlights Clear Front Reflectors For Turn Signals?
Oct 22, 2006
Below in this photo-shopped picture the camry headlights have clear reflectors for the turn signals ..
I am going to be doing a HID retro , and I want to swap out my reflectors for some clear ones. Anything or anyplace I can get large non-vehicle specific reflectors and i can manufacture my own ? I want to keep the car as legal as possible, after my illegal retro (all retro's are illegal )
View 14 Replies
Advertisement
I bought a used 2002 Camry (at a discounted price because of a few dings and dents) and the headlights are not working. The high beams and turn signals work but not the headlights. I changed the bulbs, checked all the fuses and got a new relay but still nothing. I brought it to an electro-mechanic and he told me the ECM was busted and that he could maybe grind it down. This seemed odd to me so I called my old mechanic in the states who said he has never heard of an ECM causing headlights not to work and suggested I install a toggle switch. Does this sound like it could work? Could I do this on my own? I'm pretty handy but am a little hesitant to try any electrical work on my car as I have no experience with electrical work.
View 3 Replies
I thought I saw someone had converted the reflectors on the front of the side mirrors to turn signal flashers on the 2010-2012 F150. Where I can find that write up?
View 1 Replies
I'm looking to replace the headlights and turn signals on my 2002 Excursion - I've seen loads on Ebay, but don't really know how to tell what ones are ok? I like the chrome style, and like the led lights too - but mainly I just want the front of the truck to look more modern (I am buying the 05 style grill too)...
View 10 Replies
I started my car yesterday and noticed the headlights, A/C, defroster, turn signals were all not working. I checked the fuses and they're all fine. Checked other posts and it looks like the common denominator is the ignition switch. (Looking for pics) how to change out the ignition switch? And what is the level of difficulty?
View 1 Replies
My headlights flicker everytime I hit the turn signals and bring my windows down, what might be causing this?
View 1 Replies
So after a pretty harsh storm last night I was driving today and my wipers came on. Went to turn them off and nothing. My headlights and turn signals won't work either. When I pull the stalk to turn my high beams on my wipers go off. Parked the car and the dash lights stay on without my key and the wipers randomly go on and off. The blinkers in the rear remain lit with the car off as well. At work right now so nothing came up when I searched briefly but do any of you have any insight as to why my car is possessed? Going to check grounds when I get home.
View 4 Replies
Got in the car this morning and my headlights,windshield wipers, and turn signals would all not turn on or work.
I'm not sure if the this is a problem with the stalks on the steering column or possibly a relay.
When i pull the left stalk my high beams will come on but only when i do that.
The windshield wipers would not turn on at all and the windshield wash would not even spray as well.
I also noticed that my AC/Heat controls wouldnt respond either. Any clue as to what it might be.
View 1 Replies
X2 nights ago at 11:45pm I was driving home from a friends house with my gf and were going about 65 on the highway and it's lightly raining, then all of a sudden my headlights, windsheld wipers, turnsignals, my ac/fans all just shut off so I had to pull over right away. After sitting there for about 15 mintues I figure out my high beams still work but only if I hold them on(clicking it on doesn't work. So I drive home and the next day check all the fuses in the drivers door and they r all fine. Everything else works in the car but the stuff stated above. My car was reposesd about a year ago when I lost my job and they put this thing I have to enter a code every month, it messed my windsheld wipers and turn signals up before but not anything else! But it still works and the other stuff doesn't, and behind the dash it sounded like crackling and smelt like burning electric right before it shut off.
View 6 Replies
My truck is a 2004 F150 XLT, 4.6L 2 wheel drive extended cab
The truck starts fine. With no lights on, heater/ac blower turned off... my turn signals and hazards work as they should.
If I turn on my headlights, I have no turn signals and the indicators on the dash are slightly lit up along with my highbeam indicators. The actual dash lights do not come on.
The blower does not work at all regardless of whether the lights are on or off. Turning the blower on immediately creates the same issue as the lights. (no turn signals, slightly lit up indicators, etc). The blower does not work on any speed. I can hear the duct work changing direction behind the dash as I move the blower selector from dash to windshield to floor, etc. I can also hear the compressor kicking on for the AC.
What I have done: I have checked all the fuses. I have attempted to remove every one of them while running to see if anything shutting off would let the blower kick on. I have unplugged the blower entirely wondering if there was a dead short. I have removed and unplugged the resistor to see if that might be an issue. I have also removed the right side kick panel and checked the ground wire there that runs to the dash. Everything so far seems to be in good order.
View 3 Replies
How to fix or solve front turn signals that are not working? I just realized that both the front signals on my Prius doesn't light or flash when making a turn, the rear are working fine. Is this an easy fix or should I bring it to the dealer?
View 4 Replies
I'm having problems with my front marker lights. The turn signals work but when I turn on the parking lights or headlights they don't work. They only work with the turn signals. And I can't get the front side marker lights to come on. I've tried everything...
View 2 Replies
I had my passenger side cv axle replaced two months ago 2002 camry xle 110k miles for the ABS broken ring. After that start to here a shuddering intermittent noise from the front of the car more clear on turning the steering wheel, sometimes I here a metal on metal noise on bumps, axle was a brand new one and a press garage pressed the bracket on it..
View 6 Replies
My mk4 jetta is causing me a hell of a fuss right now. The rear turn signals and the signals in the fenders are working but the front signals are both out. The signals blink fast as if it's a bulb but both bulbs and all fuses are good. When the hazards are on, they blink normal speed but the front lights are still out.
View 13 Replies
Well now I have to replace the multi function switch due to moving my steering wheel and the headlights sometimes working and turning signals not working. I saw a great video on youtube about changing a Multi Function Switch and it shows where the air bag needs to be removed. I was hoping that since my truck is an older 1997 F250 LD I wouldn't have to remove the airbag. Is there a way to do this w/out messing with the airbag on the 1997?
View 1 Replies
I did my research and it turns out I need a relay switch for my blinkers. these bulbs are bright but flash too fast..
How do the relay switches work, what do i plug them into and do I need one relay switch per blinker?
View 14 Replies
Swapped out the front turn signal bulbs for LEDs? Looking for pics or vids showing the difference between LED and stock.
View 17 Replies
I disconnected my DRL's (because I have HID's so they don't work) so I am currently using my parking lights (front turn signals, rear brake lights) as my DRL's, however my problem is that the front turn signals are not that bright, so what I can do to make them more visible during the day...
View 24 Replies
I am gonna switch out my front turn signals from my 2006 Passat but I dont know how. Are there any screws or clips that I need to remove? Looking for Pics ....
View 3 Replies
Ok so I have a 2014 F-150 Screw fX4 with the projector headlights. 13356.0 km as I sit in it. I had turn signals the other day, but now none. I had the dealer disable the lamp outage to remove the hyper flash issue with led's. Sockets don't look burnt or anything everything is new. So here is what is working.
- mirrors turn indicators
- rear turn signals
- dash turn signals.
I have reinstalled my OEM bulbs and still have the issue, only my running lights are on the front. So it has power.
View 6 Replies
As i kid i hated seeing people make there turn signals blink faster but know as i got older I like it, so on my 2011 camry and i want to make the turn signals blink faster. Not too fast but a little faster. I know I need a flasher but i can't find one for the Camry. I know I have to remove the instrument cluster.
View 14 Replies