Camry :: 2006 Toyota 2.4 LE - Cannot Get The Car To Enter Programming Mode For Key Fob
Dec 5, 2015
I purchased a used toyota camry 2006 2.4 LE. They key fob doesn't work since I got it, so I thought maybe the key fob battery is dead or the key fob itself is damaged. I searched for how to program they key fob and found some instructions, but it doesn't work. I can't get the car to enter the programming mode for the key fob(it should lock and unlock automatically as tutorials point out). Where to start tackling this problem?
View 1 Replies
Advertisement
I have a new keyfob for my wife's 2000 X, and I'm trying to program it. The procedure is simple, right? Get in the truck, put the key in the ignition, lock the doors, unlock the doors, then cycle it to the run position (back of off), 8 times -- staying in "run" the eighth time.
I've done this OVER and OVER after my wife said it wouldn't work for her. The problem is that when you hit run the 8th time, the locks should cycle, indicating that it is ready to program the remote. The problem is the locks never cycle.
I also tried the same procedure without the locking and unlocking step prior to turning the key. And I also tried it by locking and unlocking prior to inserting the key.
View 14 Replies
I have a 2006 Camry XLE and I had to replace the battery on the keyless entry remote. I am trying to get it to link back up but all internet searches tell me to go through a process of opening and closing the doors to get the car into "programming mode".
I have tried the sequence several times and I cant get my car to go into "Programming mode" as this website suggests but my car does not respond to that sequence. Am I doing something wrong? How do you get your car to link back up with the keyless remote?
View 3 Replies
I have tried to program 2006 Toyota camry for remote key activation .. but after all the steps completions the locks are not responding to activate the remote key.
Have tried many times as shown in videos but car not responding.
View 3 Replies
My 2011 Prius does not have an MFD since mine is the standard model. I tried to find a way to monitor the 12V battery by searching the forum but could not find a way to enter maintenance mode without the MFD. How to put my Prius on maintenance mode?
View 8 Replies
I have a 2009 Prius with an Enginer 4kwh battery pack. I know that the Prius' programming has a number of parameters that control when it will enter EV mode.
The display says "Cannot enter EV mode now" when engaging my Coastal EV mode switch at times when I believe it should be able to enter EV mode. Here are the conditions from a recent trip:
-Stopped at a light
-The ICE not running
-Car fully warmed up (just drove 10 miles)
-AC off
-Outside air temp 62 degrees
-Battery showing green bars with the top bar white
If I enter EV mode when the car is started cold then it works fine. Once I've driven it a while I can't get it to return to EV mode reliably.
The last time I spoke with my local Toyota dealer they said that because the 2009 American Prius was not shipped with an EV mode switch they would not support that mode.
View 2 Replies
I have a 200 GMC Jimmy SLE and I am trying to program the new FOD key for it. I followed the listed instructions here [URL] .... and here [URL] ..... but it will not enter program mode.
So, is there another method to try to get it into program mode? I have looked here and else but the only other instructions has to do with pre 2000 series blazers.
View 2 Replies
Have 1000 miles left on the 150K CA battery on my 2009.
First, I can no longer enter EV mode with the ev mode. It always says cannot change into ev mode right now. In the past, that only occurred during the warm up cycles. Now it always says that regardless except if I try when first powering on before the engine starts. In that case, when it was working, it would switch over and the MFD would change to show the battery. Now nothing and the engine always starts.
Also, the battery charges and discharges much faster than it used to. I can barely get a 1/4 in stealth (feathering the throttle to keep the ICE from kicking on) without it going from 8 bars down to 2.
View 12 Replies
When I bought that '99 F-250 SuperDuty, it only came with one key and one keyfob. So, I had another key made (no chip in key, btw!) and ordered 2 more keyfobs.
I've followed the instructions to the letter. I cannot get the truck to go into 'program mode' to program the new keyfobs.
I've also ordered (and received) new door locks, ignition 'lock', since the key to start the truck doesn't work in the doors. Strange.
Anyway, the original owner said that he had to have the ignition 'lock' replaced and he lost the door keys.
What is the proper way to get this truck into 'program mode' so that I can program all 3 keyfobs?
View 14 Replies
Have already fixed the weak lock motors on my 2000 F250. Now I can't get the truck to go into programming mode. I know it has Keyless entry, as I located the relays and identified the wiring while trying to fix the weak locks before I found the fix here.
I've tried the key on off 8 times but the locks never cycle. I've tried it with the driver door open and closed, cycling the locks from unlocked to locked to unlocked before cycling the ignition switch. Tried cycling the ign switch 5 times, 8 times and 10 times.
View 7 Replies
The owner's manual for my 2012 Toyota Camry does not give a very good description about what the MODE/HOLD button on the steering wheel is for. At first, from what I had read in the manual, I thought it was like a mute button for the radio, cd, etc. when I wanted to use my hands free cell phone. When I first tried to do this, it took me a while to realize it but I was actually muting my cell phone.
View 3 Replies
I just bought a used car 2005 toyota camry with remote car starter which works fine. I bought the keyless fob from ebay and tried to program it using youtube video but my car wouldn't go in programming mode.
View 3 Replies
I was wondering, how to access the "Vehicle" setup features within the Entune system on a 2014.5 Camry SE, WITHOUT having to go to the dealership to do so?
My interior lights do not turn on automatically when I first enter the car. I know it's easy enough to do this manually, but it's something 95% of cars do by default. Additionally, I'm one of those who likes to tinker with settings over a few days/weeks time, so I don't want to have to setup a trip and service every time I decide I liked a previous setup better than the current one.
My salesman went into these settings (on my car), so I know these settings exist and it should be easy enough to find the Contra special code to access them! My "Vehicle" settings are grayed out regardless of whether the car is turned or in accessory.
View 3 Replies
The button to enter the address for Destination is greyed out. Even when the car is not in motion. I bought the car used so not sure if the previous owner has disabled anything in there.
View 2 Replies
I just received a 2010 Camry XLE V6. The problem is such: no matter what I do, I am unable to input or enter an address into the built in GPS. the "ADDRESS" button is greyed out and not clickable.
I can't enter an address (123 W. Whatever Street, Anywhere, USA) to put in something for the address book, home location, "drive to" etc.
The Toyota dealership guy said, "something is definitely wrong"
the whole car and built-in unit work fine with the exception I cannot enter an address because the button on the on-screen display/menu is greyed out and unclickable ...
View 14 Replies
I have a 2006 Avalon XLS. Great car. Came with 1 cut master key and 2 remotes. I bought two blanks off amazon with the right transponder chip and had them cut for $5. Now I need to use my master to program the transponders in the two new keys. Or to get the car to recognize the two new keys to start it. They just turn and crank right now.
Any way to do this without the dealer? Mine wants $120 for programming. I do have the black master key.
I have tried the whole master key on off six times and open close drivers door five times deal. I cannot get my security light to stay on to accept new keys.
View 2 Replies
The key fob for my 2006 Toyota Camry stopped working. I replaced the battery twice with new ones and it still doesn't work.
I bought a replacement key fob from Amazon and followed the instructions (along with the youtube video) many times to re-program the new key fob and it didn't work.
View 13 Replies
Just picked up a 2006 Toyota Camry LE (Gen 5.5) and it has the basic single CD (no tape player) radio without any AUX input. This vehicle is going to be my new daily driver (supercharged Mustang isn't going to cut it) and I want AUX as I will be driving across the country.
Are there any new solutions to getting AUX in a gen 5.5? Not looking to replace the whole head unit because I like the stock simple controls.
View 8 Replies
I have a 2006 Toyota Camry SE with about 6,xxx miles on it. Called up the dealership I bought it from and they are going to charge me an arm n log to see what is going on.
The issue is there is no air blowing from Lo-High, all lights work except A/C, so i'm guessing its not the AC/Heat control.
This is what I've done so far in DYI:
1. replaced Blower motor Resistor.
2. Check the Fuse underneath the steering wheel. (Still Good)
this is what I'm going to do next:
1. Buy A/C relay $75+ tax (dealer)
2. Change Blower Motor $175+ tax (dealer)
View 12 Replies
I have 2006 - Toyota Camry LE and its AC light starts blinking in few seconds as soon as I start it. What could possibly be the cause of this issue?
I searched for Magnetic clutch relay for 2006 Camry, but could not find any in Auto parts dealer. Can it be Cabin filter?
Where can be the issue and where can I find the correct part?
View 5 Replies
2006 Toyota Camry 4 Cyl Manual Transmission. I'm getting a PO017 code - Engine Coolant Temperature (ECT) Circuit Low Input.
The dashboard temp gauge reaches a red H at low speeds. After about 15 minutes of driving, the car overheats and shuts down when the car slows down. I wasn't at home and didn't have coolant, so I put water in the coolant reservoir. 15 minutes later at home, the car overheated and shut down. The water in the reservoir was boiling and steaming.
When the car is idle, the radiator fan turns on immediately. I noticed the passenger side fan doesn't run. Could the one fan be the problem?
I was also really low on oil and added oil. There's oil on the engine block too. I might have multiple problems at the same time. See pics. [URL] .....
View 12 Replies
