Camry :: 2003 - Remote Keyless Entry Stopped Working And Won't Program
Aug 9, 2013
I have a 2003 Camry I4. My RKE stopped working. First I checked the battery in the remote, it reads 3v like it should. I searched and found how to reprogram the the receiver, so I tried that. I did the door and key dance and got to where when you pull the key out and the door locks lock then unlock. I try pushing the lock and unlock button, then just the lock button as per the instructions and I get nothing. Supposed to get one cycle of the locks if it works and tow cycles if it doesn't. I get neither of those, nothing happens. So I buy a new remote off of eBay (brand new, never used, OEM remote). I try the reprogram door dance again and get the same results. The battery in the new one reads 3v like it should as well. So I go off to a junk yard to replace the receiver door controller, I found one and replaced it and I get the same exact results.
View 8 Replies
Advertisement
How do i program my keyless entry remote to my 99 grand am?!?
View 3 Replies
I just bought a 2009 toyota camry Le and it came with only one keyless entry key. I bought new one on ebay but can not program it.
View 14 Replies
Last week my keyless entry stopped working. The key-fob buttons still work but not the push buttons or open signal on any of the doors. Took car in for tire change yesterday and to check this problem. Dealer has checked all the modules, including power and found no problems. They are now working with VW tech support to see what to check next.
View 2 Replies
I'm having an issue with my 99 passat v6 sedan. The problem began when I noticed my keyless entry stopped working (lock, unlock, trunk release). Then when I tried turning the key in the ignition, it wouldn't crank at all. All my electronics started up though (headlights, cabin lights, radio, dash). I then noticed that the alarm light next to the door lock was not lighting up. I have a spare key, and it is having the same problem.
I checked the fuses, but none were broken. I imagine that whatever controls the alarm and signals from my key is broken. I don't know what this object would be though, if it exists, what it's called, where it would be, how to tell if it's broken, or how to replace it.
View 3 Replies
I have then 04 Touareg V8 and my keyless door entry has stopped working. The dealer wants me to just leave it and they will work on it. The remote button still works it's just as you walk up to the Toruareg that the doors do not unlock.
View 7 Replies
But i have a 99 silverado 5.3l z71(new body style) bought a new key fob to program but my truck will not go into program mode. Ive tried the hold unlock then cycle ignition and the turn signal version but neither one worked....
View 10 Replies
I'm putting in a remote starter keyless entry in my 2000 f150 I have all the wires figured out except for the remote start part. Where the wires listed in the photo go? I do have the module required.....
View 3 Replies
On last start up the starter sort of sounded odd, thought nothing of it. Went to go to the store again, and nothing. Keyless entry does not work. No activity at all. Used the key to get in and try to start...nothing. tried to open the trunk from inside. Nothing. Replaced battery about 3 months ago. No problems with that. Car is maintained religiously.
View 1 Replies
I have a 2008 Phaeton v8. The keyless entry feature on the exterior door handles has stopped working. The car neither locks or unlocks using the keyless entry feature. I tried using accessing the car with different key Fobs to no avail.
View 2 Replies
Keyless entry stopped working on driver's door, but still works on passenger door and hatch. Pushing the buttons still works. I already changed the battery in the fob, so it's obviously a problem with the sensor in the door handle.
View 5 Replies
I have bought a used 1999 F250 4-door 4X4 7.3. Is there any way to tell if my truck came with a remote for the keyless entry. It has power door locks and windows. I was debating on calling my local Ford dealership and seeing if they could check by the VIN number.
View 7 Replies
2003 Sierra 2500HD crew cab, my keyless entry remote stopped working completely after I unplugged and connected some wires behind the glove box. I was digging around trying to find the cabin air filter, which I later found out this truck doesn't have one, when I unplugged some wires from a module so I could access the air box easier. I unplugged two plugs that had a handful of wires each, as well as 2 coax type cables. I re-connected all wires when I was done, but when I tried to use my keyless entry remote it didn't work. It worked perfect before this, less than an hour prior.
I had another remote battery so I went ahead and changed it, still didn't work. I tried reprogramming the remote by putting the truck in program mode with the procedure for this truck, but never got the truck to recognize the remote during this process.
I also disconnected the truck battery for 20 min, reconnected then tried reprogramming with same results, remote not recognized.
What the module is behind the glove box? Is it the BCM? Any reason unplugging these wires and plugging them back in would make my keyless entry stop working? I can't find any fuses related to keyless entry, and haven't noticed anything else on the truck not working properly. I really don't like going to a dealership, what else should I look at to diagnose this?
View 1 Replies
I have a 1995 Dodge Caravan le which is in perfect condition throughout. But recently the interior lights stopped working when the doors are opened and when the keyless entry thing is activated. The overhead lights do work when manually pressed but the dashboard switch that is supposed to turn them on when in the far right position doesn't do anything. If I hold the drivers door open and push in the activation button on the door jam, I can hear the relay clicking but nothing happens. My mechanic said he thinks it might be a bad computer part and will replace it but didn't really want to. I can't find a fuse for the interior lights so don?
View 5 Replies
If your truck came with the FOB to open the doors remote, but not the keypad on the door, you can add one. Originally the keypad was hard wired and was an expensive option. Several years later the newer keypads were RF signal just like the FOB. If you have or had FOB, then you have the keyless module on the truck (mounted to firewall infront of the emergency brake).. All you have to do is buy the newer style RF keypad, stick it to the door, and program like the FOB. I just did this on a 2002 F150.
View 5 Replies
I have a 95 f-250 psd with factory remote keyless entry. about 3 weeks ago i had a fuse blow that powers the keyless entry module, speed control, and a number of other systems.
If I replaced the fuse it blew right away so i got my wiring diagrams out and started unplugging parts of the circuit and my last attempt was to unplug the keyless entry module. presto no blown fuse so i got a module from a junk yard fixed the problem and now it has happened again. same exact thing. unhook the module and no blown fuse. i took the first module apart and saw no burned parts and no visible damage but here i am blowing fuses with no door locks, dome light and a few other things.
The fuse that blows is fuse 8. I am a mechanic and have full access to anything I need. I have another module under warantee but I want to be sure that its not something other than the module causing problems.
View 6 Replies
I purchased a NEW 2008 Hyundai Keyless Remote on the internet. It didn't come with programming instructions. How to program this remote.
View 15 Replies
I, like many, have had issues with my aux jack and decided to have it replaced with an aftermarket device. My aftermarket device plugs into the rear of the radio in place of the OEM aux harness. After removed the old OEM aux harness and installed the new one and put everything back together i had a problem.
The new AUX also comes with a USB slot as well and it all works properly, thats not the issue.
The issue is that my keyless remote has intermittently stopped working. I got out to lock the doors with the remote and nothing happened. I had no time to fiddle with it so i locked the doors via the keyhole and left it. The next time to went to my car, i tried to use the keyless and voila it worked! it locked AND unlocked. I was releived that it worked. Unfortunately once i drove and parked and tried to lock again - it didnt work . Needless to say it doesn't always work, ususally if i lock the doors with the key and come back more then 30 minutes, it unlocks keylessly.
The remote LED light turns on when i press any of the buttons so i know the battery is fine. I already opened the remote and confirmed the contacts are working properly. The only thing i haven't tried to do is reprogram the keyless remote (which i dont think is necessary).
Random symptoms - there are 3 circular dials (fan control, fan speed, temperature control) in the centre console. Originally ONLY the center dials LED lights would turn on. Now randomly the 3rd dials LED lights turn on again. I wanna start checking fuses but would like to know where to start.
View 8 Replies
Ever since the air cond compressor Burned up I replaced it now the keyless entry quit working along with the radio really every thing quit till I put the key in the ignition and once the key is in the ignition the radio still doesn't work.
View 6 Replies
I have a 2005 Prius. The remote keyless entry just stopped working for locking and unlocking the doors. I replaced the battery and it didn't affect it's performance. The key will still start the car without inserting it into the dashboard. It feels like the unlock portion of the remote is "stiff" and does not depress. It is toyota model number B31EG.
View 2 Replies
I noticed today that the red (panic) button cover is lost from my keyless entry (silver Toyota logo) Gen II 2008 remote.
What I basically need is a broken remote, essentially just that red rubber cover.
View 7 Replies
