Camry :: 2002 LE Keyless No Longer Working
Jan 18, 2012
Lent the wife my 02 camry le, and i just went to go out and the keyless is no longer working!
I thought the battery was dying cuz she says she didn't do anything. But she also insists she used the key to open it, not the factory fob/keyless.
So i was playing around with a second fob and it also isn't working.
After playing with the buttons, every now and then the lock function will work, and I think it unlocked. But not like yesterday (1 press).
I have a hard time believing the fobs are both on the way out, but is there something that she could've done that disabled the keyfobs?
View 2 Replies
Advertisement
All of the sudden the remote to my 2009 Subaru Outback stopped working. The car doesn't respond at all. I mentioned this when I had the car in for service and they tested my remote. They detected a signal that it was sending out so that means something is wrong on the car side and the remote appears to be functioning fine. Unfortunately I only have 1 remote (bought the car used). I didn't have them look any further into it because they admitted that they don't know what the problem could be and it would take time to investigate.
View 1 Replies
All of the sudden the remote to my 2009 Subaru Outback stopped working. The car doesn't respond at all. I mentioned this when I had the car in for service and they tested my remote. They detected a signal that it was sending out so that means something is wrong on the car side and the remote appears to be functioning fine. Unfortunately I only have 1 remote (bought the car used). I didn't have them look any further into it because they admitted that they had no idea what the problem could be and it would take time to investigate. What the problem could be?
View 9 Replies
Ii have a 2002 Ford Explorer XLT. Some days ago I tried to open truck doors with the remote controller and I couldn't. I put new batteries on it and it didn't work either. So i change for another controller I had (not new but in good conditions) i programmed that control and was perfect for 4 days. Now the new control does the same, it has new batteries and doesn't want to work.
View 3 Replies
I have a 2003 Camry I4. My RKE stopped working. First I checked the battery in the remote, it reads 3v like it should. I searched and found how to reprogram the the receiver, so I tried that. I did the door and key dance and got to where when you pull the key out and the door locks lock then unlock. I try pushing the lock and unlock button, then just the lock button as per the instructions and I get nothing. Supposed to get one cycle of the locks if it works and tow cycles if it doesn't. I get neither of those, nothing happens. So I buy a new remote off of eBay (brand new, never used, OEM remote). I try the reprogram door dance again and get the same results. The battery in the new one reads 3v like it should as well. So I go off to a junk yard to replace the receiver door controller, I found one and replaced it and I get the same exact results.
View 8 Replies
So, last night I go to turn on the high beams on my 2002 Passat (pushing the bar on the left of the steering column forward) ... and nothing happens. The bar clicks into place as it should, but no high beams. The little indicator light on the dashboard does not come on, either.
I try to flash my high beams, and that DOES work. The brights come on, and the little indicator lights up when the beams engage.
So ... I know it's not a fuse, since the lights are actually functioning. What part/switch/relay/whatever needs to be replaced to get this fixed? I feel like this would involve me needing to pull apart the mechanism in the steering column, but I hope not ...
View 3 Replies
Car details: 2002 Toyota Camry V6 3L LXE - 151k miles.
My car took a little longer than normal to start up one morning, but I attributed it to the especially cold weather. I didn't have any problems the following two or three mornings, but my car suddenly died in traffic as I came to a stop, as it had many times before. What made this incidence different in particular was that I didn't feel my car shake or shudder before it shut down. I simply looked down and the Check Engine, oil, and battery lights had all come on, and my power steering was gone.
I attempted, as usual, to restart my car, but the starter only sat and tried to turn over and nothing more. Once I gave it a little gas, it caught, but as soon as I let the engine idle, the RPM dropped to 0 and the engine died. I sat and kept my foot on the gas for a minute or so after I got the car started in hopes that the car would stay on - when I let up, it idled roughly close at a very low RPM for several seconds, shuddered, and then died.
I was unable to get out and under the hood to try the typical trick of unplugging the MAFS and plugging it back in again, so I'm not sure if this would have worked as it has before despite having been replaced. Actually, before I was able to do this again, wouldn't you know it? My starter died. My car started giving a grinding, choking noise when I tried to start it up again, so I simply had it towed to the mechanic.
The mechanic declared the starter dead, which is unusual given I just had it replaced several months ago (could just be a lemon, I guess), so I had it replaced and they said the car started and ran great afterwards. They could not replicate the problem (like previous times), the computer gave no codes.
I noticed after the starter choked, my odometer lost power and my clock reset.
Is it possible that it's some problem with the battery?
View 10 Replies
Just bought a 2002 Camry XLE V6 (86.6k miles) with JLB Premium Sound Package from a dealer. Works great during the day, but no night time illumination.
Don't know if related but previous owner had "A/C LIGHT IS BLINKING AND IS INOP" repaired at 75.1K miles.
Cannot talk with previous owner, but good maintenance records provided.
Am considering aftermarket NAV system if current audio system fails.
View 10 Replies
For some reason, it just stopped working. I replaced the battery about a couple of weeks ago, and it has worked fine until today. it shows the red led on the remote when I press lock or unlock, but nothing happens.
View 13 Replies
I have the keyless entry feature, but it's been acting strange lately. I keep my key in my right side jacket pocket & lock/unlock the door with the button on the handle of the car. Lately it hasn't been working....I have the hold the key next to the handle It seems to be doing this just about every other time I get in or out of the car.
View 2 Replies
I have a 2002 Camry. The low beam headlights stopped working last night. All the other lights work. High beam, driving lights, marker/park lights. I checked all the fuses. I changed the headlight relay. Still nothing. Could it be the headlight switch on the steering column? Trying to do more research before I replace it.
View 2 Replies
I have a 2002 CAMRY XLE, the AC controls work fine, everything works as it should except it doesn't show / display on the LCD.
View 1 Replies
Recently the keyless entry buttons (lock, unlock, panic) buttons stopped working. The red light still came on (strong), but car wouldn't unlock. The key still works for starting the car, but having to use the manual key to enter.
What I have tried:
Ensured this is Option Package 1 car, no push button to disable the SKS from under the dash Tried the reprogramming steps here in this post (though I would say they are not 100% clear) Read the owner manual pages 20-40 Gave up and spent $5 on another CR2032 battery (did not work).
View 19 Replies
Last week my keyless entry stopped working. The key-fob buttons still work but not the push buttons or open signal on any of the doors. Took car in for tire change yesterday and to check this problem. Dealer has checked all the modules, including power and found no problems. They are now working with VW tech support to see what to check next.
View 2 Replies
I have prius 2007 of the Japanese make (140k miles). Yesterday, my keyless fob stopped working. I couldn't use it lock/unlock my car; however, it is starting the car just fine. I replaced the batteries on the fob but no avail. The small red light on the fob is shining like normal. There is no abnormal behavior in the car otherwise. What should I check?
View 8 Replies
I put in keyless start about a year ago (best mod ever) and about three weeks my keyless access stopped working. Keyless start works fine. Supposedly I need something called a Kessey module. Is there any chance the two are related? Is the Kessey module the thing you put the extra wires into for the keyless start or is it an entirely separate module?
View 16 Replies
My keyless entry seems to work only when it feels like it. I have had the remote TSB addressed and the range has not improved with the key. I can get the keyless entry to work often by holding the key higher, instead of just leaving it in my pocket. When I try to open the trunk most of the time have to hold the key up high to get it to open. Also my remote range and response to the remote is very bad and inconsistent.
I have read that there are two remotes for the Touareg. One for keyless entry and for without. I am wondering if I have the correct one. I saw a ebay sale for a key with the same part number as the one on mine but it did not specify for keyless entry. The part number on my key is 3D0 959 753 T. It has other numbers as well. Which one is the correct key for keyless entry. If it work for my vin is 0008500.
I would like to do keyless start, but can't until all my remote/keyless entry problems are resolved or the dealer will just blame the keyless start install for the problem. I love my Touareg so little things don't bother me, but would really like to fix this one.
View 10 Replies
When I hit the buttons on the remote the red light blinks so I assume it has power. But doors dont unlock, lights dont flash, and it can't open the trunk. Is there a fuse for this?
View 9 Replies
2003 Sierra 2500HD crew cab, my keyless entry remote stopped working completely after I unplugged and connected some wires behind the glove box. I was digging around trying to find the cabin air filter, which I later found out this truck doesn't have one, when I unplugged some wires from a module so I could access the air box easier. I unplugged two plugs that had a handful of wires each, as well as 2 coax type cables. I re-connected all wires when I was done, but when I tried to use my keyless entry remote it didn't work. It worked perfect before this, less than an hour prior.
I had another remote battery so I went ahead and changed it, still didn't work. I tried reprogramming the remote by putting the truck in program mode with the procedure for this truck, but never got the truck to recognize the remote during this process.
I also disconnected the truck battery for 20 min, reconnected then tried reprogramming with same results, remote not recognized.
What the module is behind the glove box? Is it the BCM? Any reason unplugging these wires and plugging them back in would make my keyless entry stop working? I can't find any fuses related to keyless entry, and haven't noticed anything else on the truck not working properly. I really don't like going to a dealership, what else should I look at to diagnose this?
View 1 Replies
This problem started a month ago but was intermittant. Now the passenger window is down and I can not get it up. The keyless remote doesn't work at all. I open the drivers door with the key and I can open the drivers door and window from inside but not the passenger door or window.
It is now raining with my window open and a plastic trash bag over it.
View 7 Replies
I'm having an issue with my 99 passat v6 sedan. The problem began when I noticed my keyless entry stopped working (lock, unlock, trunk release). Then when I tried turning the key in the ignition, it wouldn't crank at all. All my electronics started up though (headlights, cabin lights, radio, dash). I then noticed that the alarm light next to the door lock was not lighting up. I have a spare key, and it is having the same problem.
I checked the fuses, but none were broken. I imagine that whatever controls the alarm and signals from my key is broken. I don't know what this object would be though, if it exists, what it's called, where it would be, how to tell if it's broken, or how to replace it.
View 3 Replies