Camry :: 1998 Tires / Wheel Swap For 2004?
Mar 23, 2012
Can to take tires/wheels off a 1998 CamryLE (P19570R14) and swap them for 2004 Camry LE (P20565R15)? I am selling 1998 and 2004 needs new tires.
View 1 Replies
Mar 23, 2012
Advertisement
Toyota - Camry :: 1998 - Steering Wheel Shudder After New Tires Have Been Put On
The 98 camry has steering wheel shudder after the new tires have been put on. Do I need alignment. will that work now that my tires are scalloped? The guys at the tire shop balanced the tires. the shudder was there on the old tires too, which were severely scalloped. or pitted. Can i do alignment myself?
View 8 RepliesCamry :: Can Swap 03 Steering Wheel For 05?
Okay so I'm a little bored of my 2003 Camry factory Steering Wheel. I really like the ones from a 2005 Camry. Is there any way I can swap my 03 wheel for an 05 wheel? URL...
View 1 RepliesCamry :: 2007 V6 SE Shimmy Or Shake In Tires And Steering Wheel On Cold Start
For the past few months when the vehicle is cold (by "cold" I dont mean physically cold, just mean it has been sitting all night in my driveway and it's still 90+ degrees outside) and I start driving, I seem to have this shimmy or shake in the tires/steering/steering wheel. Once my car seems to "warm up" (driving a mile or two) it goes away and my car is extremely smooth.
Could it be tires (I've tried rotating)? Suspension? Wheel bearings? I'm lost for even imagining what it could be. I don't believe it is engine/trans related, as it idles/revs just fine and shift perfectly...
Camry 2012+ :: Wheel Fitment / Rear Tires Are Choppy Causing Noisy Driving
I might be buying a 14 Camry tomorrow. I test drove it the other day and had it looked at by belle tire. They said the rear tires are choppy causing noisy driving. On the highway it sounds really noisy in the front of the vehicle. Everything else checked ok on the inspection but I was trying to find some wheels that will fit the Camry. 5x114 which my parents have a 95 lexus es300 that has 5x114 wheels. Although the tires are 205 65 15. Do I could put those on and will they clear everything to be able to fit?
View 6 RepliesGrand Prix :: 2004 GTP - Wheel Noise After New Tires / Rotate And Balance
I have a new car now, 2004 Grand Prix GTP Comp G, got it at 88k and it now has 167k. Nearly no problems other than routine maintenance, but here I am with an issue I can't seem to figure out.
A few weeks ago, I blew a tire on the highway, ended up getting 2 new tires put on the front and moved the fronts to the back. Tires were then rebalanced and the alignment straightened out.
The guys at the shop said the front tie end rod needed replaced, but I'm pretty sure they were trying to make extra money off a new customer because my bill was going from tires/alignment to tires/alignment, bearings, tie end rods, and speed sensors.
Now, on to my issue. When I'm driving on the interstate, I notice a humming sound that seems to come from the front passenger wheel between 68-80mph. Soon as I go over 80 or under 68, it's gone. I noticed that the noise lessened when I veered to the right, so I assumed it was the bearing.
Took the car to my usual shop, had the bearings checked, got the front driver bearing replaced under warranty. Mechanic said the passenger bearing seemed fine. Got it on the highway again today, noise is still there.
3.8SuperPacer
2004 Grand Prix GTP Comp G with Ram Air
1998 Grand Prix GTP 40th Anniversary Daytona 500 Pace Car Edition
Lexus GX 2004-09 :: Steering Wheel Vibrating At Highway Speeds After Tires Rotated
Just rotated my tires this weekend and noticed today that the steering wheel has a vibration in it at highway speeds, 65-70mph. It did not do this at all before I rotated the tires, why it's doing it now? Tires are fairly new and Bridgestones H/Ts.
I know my rotors are warped and need replaced but the vibration I'm referring to is when I am not braking.
Ford - Explorer :: 1998 - Engine Swap - Sensor Interchange?
What is the difference between the 2 wire & 3 wire cam sensors. I am installing a 98 4.0 in my nephews Explorer-engine build date of 12/98. The replacement engine build date of 5/98. There have been quite a few differences during this process and thought I had them worked out but the old engine had a 3 wire cam sensor and the replacement has a 2 wire. I have already changed the harness over due to other differences but my main question is will I have to swap the synchronizer or will the sensors interchange? The synchronizes look different as does the cam sensor.
View 1 RepliesFord Excursion :: Steering Wheel Swap
I am looking to swap the worn steering wheel in my Excursion. I would like a wood and leather like the Navigators have. Any tips on doing the swap?
View 14 RepliesPassat (B5) :: 2002 - Steering Wheel Swap With Audi?
2002 B5.5 Passat v6
Want to take a 2001 Audi TT Quattro steering wheel... only horn... no switches, and swap it with the passats steering wheel, same setup just a horn on the passat steering wheel.
Is this possible to do safely, and do the harness is the same so i dont plug in new steering wheel and have the car blow all the airbags or throw codes?
Ford Excursion :: Leaf Spring Swap - Wheel / Tire Size
My leaf spring swap is almost complete... its been almost 3 weeks with all the conflicts of life but its getting near completion. Just have to do front passenger side now.. Tomorrow and it should all be done.. hopefully... Any ways... my preliminary numbers are 40" front (ground to fender) and 41.5" rear.. Might be 1/2" to 1" off since I haven't finished the job AND the truck is sitting on dirt. Any ways, What size wheel/tires can I fit on there now? And will I need a spacer with that size?
View 1 RepliesCamry :: Interior LED Swap On Gen 6 Vehicle?
Doing the radio, steering wheel, hvac, etc.....in red LEDs on a gen 6? pictures?
View 2 RepliesFord 6.7L Power Stroke Diesel :: Swap Cruise And Stereo Controls On Steering Wheel
This may sound petty, but I would like to have the radio controls on the left side of the steering wheel of my 2012, instead of the cruise control. I guess the main question is how the wire harness is set up. Do the wiring can be re-routed to accommodate the switch?
Also, I want to smooth out the ride a tad so as to lessen the amount of griping from from the passenger seat. What is acceptable in lowering the tire pressure to allow a better ride without compromising tire wear? The factory specs are 65 psi. My truck is a 2012 fx4 Lariat with the 6.7
Camry :: 2002 V6 - JBL Radio To Navigation Swap
Just like the title says, looking to swap in a Nav unit onto my dads 2002 Camry. I've done stereo swaps and all, just looking for some info on how it'd work with the JBL speakers. Do I need to get a JBL compatible stereo?
Also my dad's looking to get an OEM Toyota. He was looking at this one [URL] ....
Why does it look all messed up and stick out so much in the picture?
Camry :: Auto To Manual Transmission Swap Possible?
Just curious. is it possible to convert my auto camry to manual transmission? also, how much would it be? where can i go?
View 5 RepliesFord Super Duty (1999-2016) :: 2005 F150 Steering Wheel Swap To F250?
So I have a 2005 f250 Super Duty 6.0 diesel it is the xlt with leather. So I don't much care for the steering wheels on this truck so i purchase a 05 f150 steering wheel. The splines and everything match up but the plug for the cruise control does not, need a wiring diagram or have done the swap and can tell me what wires connect where.
View 1 RepliesCamry :: 2002 Solara 3.0L - High Idle After Engine Swap
High Idle after engine swap. Just finished an engine swap, the motor is out of a 2000 solara. Started the car last night, and the rpms jumped to 4000. The only issue I had with the swap is some how I did not disconnect the two throttle cables, not sure how I missed that, but they did get stretched a little.
View 1 RepliesPrius (Gen 2) :: Wheel Trims Don't Fit Right After New Tires (weights)
I just got 4 new tires fitted and as soon as I got home and went to check the pressures, I notice that the way they've fitted the balance weights on the edge of the tires prevents the wheel trims from clipping in correctly.
View 3 RepliesPassat (B7) :: Changing Tires - Wheel Alignment
As the weather has been getting warmer lately, I'm about to change over to my summer wheels and tires. First, I'm just wondering when most people who use winter tires on this forum make the change.
On my previous cars, I've just changed over in the fall and spring by myself unless I needed a wheel balance or alignment. With the harsh winter and roads we've had this year, I'm thinking maybe I've hit too many potholes, since I'm noticing a vibration at 140kph (87mph). I got the current OEM rims and winter tires new last October and had them balanced before installing them on the car and I hadn't noticed anything until about 2 weeks ago. The issue did not suddenly show up after hitting a pot hole, but just started happening and becoming a bit more noticeable recently. The weird part is that it seems to be happening only at that specific speed when accelerating, which makes me wonder if its the wheels out of balance or engine/turbo vibrating under load. As you can imagine, if you let off the acceleration at high speeds, the car slows down slowly and the vibration goes away. So it's hard for me to say what the problem is.
When I switch over to the summer wheels and tires, I'm thinking of just changing them myself to see if the same vibration still occurs at the same speed and then deciding on whether to get them balanced or not.
A related issue, which I think some others have posted about on this site has been the wheel alignment. In the last 3 or 4 months, I've noticed that the car has a slight pull to the left under no steering input, so I may have to do an alignment soon.
Camry :: 2004 - Rear Wheel Won't Spin
Replaced rear brakes for a 2004 camry. Just decided to change out pads/rotors. Rotors were stuck on, had to use the little bolt holes to thread in bolts and push out the rotor. Time to change pads, pads came off fine but when I put on new pads and tried to put it on the rotor, the gap was too small. Seemed like a stuck caliper. Tried to remove the slide bolts, top slide bolt was fine, bottom slide bolt had a lot of resistance and would not come off the slide. Regreased it, re-assembled it and it had a lot of gap to slide over the rotor.
Reassembled everything, tried to spin the rotor by hand and it was fine. Put on wheel, lugged it down and it wouldn't spin at all. Drove it, seemed fine with no pulling but the one rotor was definitely running hotter (163 vs 113) than the other side after a 5 minute drive.What would cause it to spin freely without the wheel, but not spin when the wheel is lugged down?
Camry :: 2004 - Steering Wheel Not Centered
I have an '04 Camry that pulls to the left. I've tried many things to fix it- switching wheels/tires (back and front switch, left to right switch, completely different set of wheels/tires), I've done two different alignments (everything is perfectly straight), and it still pulls left. I searched the forums and read something about a zero point reset, but when I took it to a Toyota certified mechanic he said there is no zero point reset on the '04.
Whatever it is I'm fairly sure it is a problem with the steering column- the steering wheel wants to center a little left of TDC and I have to pull it right slightly to drive straight.