Azera TG (2006-11) :: Rubbing Sound Of Wheels At 20 Mph - Bad Bearings?
Apr 7, 2012
At 20mph my azera sounds like it has bad bearings but they have all been replaced and I still hear the sound. Almost sounds like bad bearing or something in the wheel.
View 9 Replies
Advertisement
I recently picked up some Samarkands for my 3.6 4motion Passat which originally had the 17s on it. Since swapping, I first had a little wobbling issue which was mostly resolved with a balancing of the wheels. Now the only thing remaining is this sound of rubbing going on up front. It's pretty prominent at lower parking lot speeds since my ears can catch the sounds of the rotation. Being that they're factory wheels, from another Passat originally, I assumed they would bolt right up with no issue. They're ET44 18x8.5. Am I missing something here? Do I need spacers or something. If its anything involving an alignment, that would be awesome because I'm gonna need one after I lower the car when I get back from my trip.
View 9 Replies
When I turn my wheel, i hear this sound like im rubbing my lip but not as loud.... Is this something I should be worried about... or am I just rubbing my fender lining?
View 4 Replies
My 79 year old father put fuel additive in his 2010 Chevy Impala. Don't ask me how much, or for how long... The Check Engine light came on. I never got a clear answer from him on what his mechanic said about it. Five to Ten fill ups later the Check Engine light went out on its own. Engine seems fine. Could this have caused damage to the engine or emissions controls? Would a computer diagnostic from a mechanic pinpoint any problems? Would you recommend a computer diagnostic be performed?
View 6 Replies
I have a 2007 sonata 2.4L with 93k miles that has a knocking sounds coming from the bottom of the engine. It seems that it is a bad rod bearing and was caused by low oil levels. I did not know that the oil was that low (3 quarts low) It started about a week ago. I know I'm gonna have to put it on jack stands and drop the oil pan.
By the way, Here is a video I found and it sounds similar to my car. Here's the link : 2.4L Theta Engine Noise - YouTube
View 9 Replies
I THINK my wheel bearings are going on my 2003 Nissan Altima. It has about 95k miles on it and it has been making what I would call a mid-toned rumble or a low pitched rattle (imagine shaking a metal box full of rocks). The noise is coming from the front driver's side. It's more subdued when driving in really wet weather. I am more aware of it when I drive at slower speeds. It doesn't seem to change when I turn the wheel either way, and it definitely gets more pronounced when I go over a bump or a rough patch. I recently had my front rotors and pads replaced, naiively hoped that might fix it - wishful thinking - and stupidly forgot to ask my mechanic about it then. I need to call to schedule a repair, but I would like to be prepared and to know if anything else might make this noise. (and I don't want to jack it up and shake the wheel or anything).Approximately how much does it cost to have this fixed?
View 3 Replies
I noticed some time ago that engine is making a sound like smth. is spinning very fast (gyrscope? mass wheel?) That happens when it is idle or drives slow, when I accelerate the sound disappear. The sound is hearable inside and outside of the car.
View 5 Replies
I've been having a wierd whirring sound when I accelerate for the last 1000 miles or so. I have about 19k miles on my 20007 Azera Limited. As a driver, I do have a somewhat heavy foot so I worry that I tax the engine/transmission too much. What it could be?
View 16 Replies
I constantly hear 'tick, tick, tick' sound from the engine at start. Once the engine gets heat up, the sound disappears. I live in canada so it is still kinda cold in the morning. I didn't have this problem in the summer. the problem started in december when it gets really cold in canada. so i thought it might be an engine oil problem. I called the dealer to ask what kind of engine oil they use for my azera, ans they said they just use a regular engine oil with viscosity of 10w-20. However when I check the manual, viscosity of 5w-30 is recommended. I know engine oil with viscosity of 5w-30 is thinner than the one with 10-20w and therefore easy for the engine to get heat up and better protection at start in the winter. What viscosity engine oil do you use for you azera? Will using synthetic engine oil useful??
View 17 Replies
I have recently noticed that my Azera makes a "knocking" sound right after starting the engine. It just about a dozen of fast short knocks one after another and it is gone after 2 seconds (like a diesel engine started on low temp. It appears more often when the engine is rather cold.
View 27 Replies
I have an '07 Azera and the turn signal sound is intermittent. The signals flash normally, but sometime I hear the flasher sound inside the car and sometime it is dead silent. Cannot seem to correlate it to temperature or other factors. Any way, I assume as the lights flash with no sound that either the flash or the sound is electronically generated, but cannot be like an old school mechanical flasher. What makes the flasher sound in the Azera and where is it located?
View 1 Replies
I have azera 2006 , originally i don't have buzzer sound on lock/unlock the car by remote. so i get a siren horn 12v and i tried to connect this one to the car motor locking(front right side),when i tried it gave me sound on lock or on unlock not with both ways.finally i failed to do it and i decide to cancel that. after that i had a problem, when i lock the car by remote, there is no indication lights coming tells that the car is locked, but the doors are locked except there is no light from the turn signs and if you try to open the trunk it will open, that should not be. Also, if you are inside the car and the car is on, if some one open or close the right door the car will make 3 times door unlocking. So, i think shortage happened to the module or to some sensors so the system not close the circuit.
Is this car has a control module for key less entry or that combined with bcm.
Do i need to change the module or bcm?
Do i need to reprogram the keys?
View 1 Replies
I noticed when I first start of my 2006 Azera at night or even during the day and make the first turn of of my driveway or out of the parking lot at work there is a high pitched whining sound. Sounds like it maybe coming from under the car maybe from the back. I thought at first it maybe a belt (power steering) under the hood but it sounds like it coming from the back side of the car. It only does it one time mostly when its cold outside. What can it be?
View 8 Replies
Ok a new rattle is going on in my 2006 Azera. Not sure where the rattle is coming from. Took it to the dealer last month for a oil change and asked them to look at the underbody to see if anything was loose. The service manager said everything looked fine. So if it isn't rattling there where else as I can tell something is loose somewhere.
I looked in the trunk yesterday and everything is sound in there didn't look at the spare so that is the next step. Doors sound solid but I hear it when driving like something is knocking lighly under the car. Thought it might be the tail pipe of something connected. I been riding my Burgman 650 most of the summer so far but when I pick up my girlfriend in the Azera I hear it from her and then from the car.
View 8 Replies
My 2009 Sonata has developed a 'rubbing' sound that seems to be coming from the right rear wheel. The brakes are new, the rotors are fine, there are no marks on the tire or wheel. This sound only shows up when I apply the brakes and generally at slowing speeds. If I press the brake pedal down hard the sound doesn't emit. We have checked suspension, brakes, rotors, tire and wheel.
View 2 Replies
I recently purchased a 2006 Hyundai Azera which has developed a rattling sound upon cold start up. Based on service bulletin 06-20-002 I believe the issue is with the timing chain tensioners. I am looking at getting a DNJ TK147 timing set kit to replace them with. Do this kit contains the updated tensioners? It is located on rockauto.
View 4 Replies
I have a set of 19s on my car et 42 wit 235/35/19 tyres and dropped on coilovers. I read that having et 35 would rub so i got et 42 thinking it would clear the arch but the the tyres rub on the arch liner when people are sitting in the back.
View 7 Replies
When I drive my prius and make sharp turns or any sort of UTURN, the wheels lock up, automatically brake and there is a grinding noise as if the wheels are rubbing and there is a beeping noise. I took my prius back to the dealer for warranty repairs and the problem persists. is this a normal thing?
View 1 Replies
This is my dads f250 build date of 9/03. I know these wheels are not the factory xl wheels. I also think they changed something with the wheel back spacing somewhere around this time. He is running 285/70/17 bfgs and is rubbing the leaf springs pretty good. He ran this same size on his previous 02 model with no rubbing. Can he get away with 1/4 spacers? What years these wheels are from? And the backspacing differences, if any. His 02 had the chrome large bullet hole style wheels.
View 5 Replies
My wife's car is an '05 Camry SE, V-6, 60K miles. Just recently, I start to hear a roaring sound starting about 35-40 mph. It sounds like a rear wheel bearing. I jacked up the front end and ran the car in drive, but did not hear anything unusual. I jacked up the rear and shook the wheels in and out and did not notice any play or wobble. I drove about 45-50 on a straight road and swerved gently from right to left and vice versa, but could not determine where the sound is coming from. How do I narrow my inspection to determine if it is a wheel bearing, and which bearing is bad?
View 11 Replies
Looking for a diagram on 1997 S10, 2.2 timing settings? If timing is off, will the engine sound as if the bearings are knocking somewhat? I installed a new crankshaft and new bearings. Also do the ignition coils usually go bad? Should the #1 cylinder be on the compression stroke?
View 4 Replies