Acura :: Vibration When Braking At High Speeds
Mar 25, 2016
My wife has an Acura, and when braking at higher speeds, she is getting a really bad "vibration". I am assuming the rotors are warped. We had both axles (rotors/pads) done last year (about 40k ago) at Midas. After they did them, we had to take the car back about 3 times for squeaky pads, and I swear a slight vibration, but they didn't fix them. Anyway, even though they offer "lifetime pads," I refuse to go back there.
So, her pads now started squeaking again. We were dealing with the warped rotors until we had some extra money and time to take it in. At this point, I am wondering where I should take it. I have no clue if the pads are good, and I'm guessing the rotors just need to be turned since they were just put on last brake job.
View 19 Replies
Advertisement
I have a 2007 dodge Dakota with 112K miles. At 105K I had the front brake rotors and pads replaced. The rear brakes were fine. There was a problem with one of the rotors and I returned a week or two later and one, which was warped, was replaced. Ever since that second visit I have had an intermittent vibration from the vehicle. When I brake the whole truck vibrates. And by vibrating, I mean some pretty heavy shaking. It is not the steering wheel vibrating. I took this back to the mechanic where they were unable to find any issues with the brakes. Also, we could not (of course) re-create the issue while it was in the shop. I have not been able to find the pattern. It happens when I am braking at high speeds, but not every time. It also happens at lower speed, but again, not every time.
View 2 Replies
I have a 2009 Chevy Malibu that gives through rotors every 6 months. I have replaced them 3 times now in 102,000 miles and had them turned multiple times. What happens is about 6,000 miles after I put new rotors on they warp and I get a violent vibration when braking at high speeds. I have been to 3 different dealerships and none of them can figure out why they continue to warp.
View 12 Replies
I have a 2004 Honda Accord EX (4 cyl) with 102k miles. I bought it brand new and kept it completely in shape with regular service. For the past few months I start getting front end vibration at braking, mostly when slowing from high speeds and without any repair this vibration has now became common at all speed.... my diagnosis - I need to replace to turn disk/rotors....
While I have not remedy the rotor issue yet, I started getting this new vibration at 60 to 80 mph.... Below and above this range of speed i have no vibrations - the car will drive fine. This type of vibration in my experience for front wheel drives is mostly due to balancing or bad tires. so i took the easy way ..... and as i already needed tires well i dished out the dough and replaced all four with Michelin Primacy hoping that it will resolve the speed related vibration.... Well it did not?
I continue to drive as-is without addressing the real problem - coz I'm not sure what is causing the vibration.... now new additional vibration started on acceleration; any time I hit the gas pedal (normal acceleration or kick-down) I get vibration very similar to when a stick shift's gearbox required replacement/repair of the worn out pressure plate's (fingers/springs gets bent or weak) or the thrust bearing needs replacements/repair/grease packing. I'm from the old school stickshift transmission, my knowledge in automatic is very little - I have repaired Acura's automatic transmission before but I don't think repairing once will make me an expert in automatic.
So to summarize my issues or current state:
Issue# 1 front end vibration on braking
Issue# 2 front end vibration 60 to 80 mph speed only
Issue# 3 front end vibration on acceleration at all speed
The list above is in sequential order as I have experienced.
View 9 Replies
Noticing excessive vibration when braking after 50-60 mph speeds.
View 4 Replies
I recently purchased the rims from another member here on Club Lexus.
Ever since installation, I have been experiencing a vibration at highway speeds and while braking. The wheels are correctly balanced.
My technician has told me that I need to buy a hub ring/spacer (not too sure what that is) but nonetheless, a grommet of such that fits between the backside of the rim and the frontside of the hub. I'm not too sure where to begin from there or what to even look for.
View 12 Replies
2003 7.3 Excursion, 130k, stock suspension with newer bushings, etc.
Vibration when braking at higher speeds - not felt as pulses through brake pedal or shimmy through steering wheel - rather, a "body" vibration. Stops as soon as the TC unlocks. Being a diesel I can't tap the brake to allow it to unlock like on the gasser 4R100's - its locked until it shifts down into 3rd. Turning off OD puts it into 3rd but locks TC (no way to "single out" TC). Only felt when braking in OD (though I haven't tried running up to highway speeds with OD off/trans in 3rd) - braking is completely smooth at all other times/gears/speeds and at all braking force (light, mod, heavy).
Front and rear pads are good with even wear and sufficient material, lugs evenly torqued, tires good/balanced, no sign of a stuck caliper or rotor warping, MM manual hubs unlocked. No driveshaft carrier on the Ex's, just a regular two joint shaft with recent Neapco Gold u-joints, no slip yoke play. Trans filter replaced 4k miles ago, 6 +/- qts DexIII/Merc exchanged when I did the filter, fluid smelt and looked fine. Transfer case fluid changed about 5k miles ago. Factory LSD rear diff not serviced recently but fluid suctioned from fill hole looks acceptable.
I'm afraid that something is going on with torque converter/shudder but I don't get any shudder or slip under acceleration or at any other time and gear shifts are smooth. I know that the 4R100's can be sketchy, especially with 130k, but want to get suggestions before digging into it. I've also got a very slow hydroboost leak/weep but the power steering fluid is properly filled. Steering is smooth and proper, brake pedal movement is normal so I assume there is no air in the lines.
View 14 Replies
I replaced my tires yesterday with Bridgestone Turanza ER33 (245/45/19).
After replacing the tires, there is is an extreme vibration in the front end of the car when braking at highway speeds (60+ mph). Braking at sub 50mph speeds is completely normal. No lights, no vibration while driving. What could be the reason?
Also while removing the lug nut locks, the locks key broke apart (the black piece came out of the key). After like 45mins of trying, finally we got the locks out. I threw them away.
I searched online for regular lug nuts, but couldn't find any beside ebay. The local dealer says I need to wait for 3 weeks to get them from Japan! Where can I get a set of 4 regular lug nuts online?
I'm now running on 4 lug nuts on each wheel. Could this cause a problem? Could the vibration be caused by not having a 5th lug nut in place?
View 14 Replies
My Prius c has always made a high speed whirling noise when braking but now at speeds of 42 to 46 MPH this high speed whirling noise is there and when you are just coasting have a noisy transmission or is this something I should be getting to the dealer with.
EVCT transmission noise ....
View 7 Replies
I have been getting a little wobble at high speeds(80MPH) when i brake the car. I am guessing those are the front disk brakes (had similar experience with my old 2002 Galant which i fixed with the brakes). My Sonata has 67,000 miles. Is it ok if i replace just the pads ?
2011 2.4L Hyundai Sonata SE
View 6 Replies
I have two simultaneous problems with my 2005 Elantra (automatic transmission). I don't know if the problems are related or not, or if they are alarming or not.
Background on the car: timing belt and water pump replaced in 2010; four tires new in 2010; oil changes every 5000 km.
The first is that my engine is making this 'whirring' sound when I approach 80km/hr. It's not high-pitched, but more of a droning noise. Having read around the forums, I see that Elantras commonly make funny engine noise, but this is fairly new to my car (145,000 kms) and definitely not there at all when idling or at low, city-street speeds.
Additionally, I have a weird vibrating noise coming from the front left of the car only when I am dead stopped and the brakes are fully depressed. It doesn't make this sound in park, and I don't hear it until the car has come to a complete stop; there is no odd noise while slowing down.
View 1 Replies
I have noticed the last 3 times I hit the brakes really hard above 100 mph ( even 120 mph) I hear a whirling noise coming from either the front brakes or tires. Kind of sounds like when you have really old summer tires on the car and you make a stop on the street . I have heard this on the track the last 2 track days I had. I know my front tires (Michelin PSS) are about 40% worn but are still in pretty good shape.
My rotors are the same that carried me through 6 track days in 10 months and was recently told by the dealership that my front pads need to be replaced sooner than later ( they were installed 10 months ago before all the track work ) and I am assuming the rotors are beat up pretty goo . I will be getting new tires in the next few months and will most likely be replacing pads and rotors at the next scheduled service. The car has 34k on it. Is this normal with Brembos or aggressive brakes?
View 6 Replies
I just bought a 2009 Toyota Camry with 78K miles on it. Everything is great except at highway speeds it shakes and vibrates when braking. The higher the speed the worse it is. Steering wheel shakes as well. I pulled both front tires off and the rotors appear to be smoothe on both sides with no grooves, etc. However, I'm due for new front brake pads. There's some pad left but could that be why it shakes and vibrates when braking? How do you tell if rotors are warped? Rotors are smooth but could they still be warped?
View 16 Replies
My 2003 Ford F250 V10 seems to have a vibration, sometimes at all speeds and sometimes at freeway speeds. I replaced front hub assemblies and ball joints and rear calipers last year. When braking i have a vibration in rear as well, which I think is from uneven rotor but can it be causing my vibration? Also sometimes I can smell hot brakes from the rear.
View 2 Replies
2010 RX 350 NAP ... Brand New and OEM where it would apply : Tires (Conti's LX20s)
Brakes / Rotors (had same shake before replacing and did not improve after replacement but maybe I am dealing with a bad caliper here)
Tie Rod Ends
Stab Links
Lower Control Arm Ball Joint
None of which have solved a vibration issue thus far. Strut feels solid and the corner push test had the car settle out in less than 2 bounces.
If car has sat a while the driver front (where the issue lies) feels like a imbalanced tire/bent rim (rotated the wheels just to be sure it didn't follow the wheel/tire) or like a broken belt. The tires are almost brand new and only put them on because I was trying to eliminate the point of issue.
When braking, a light touch to the brake pedal makes a almost light clank sound (like weight shift is causing the clank or perhaps a sign of a bad caliper (although pad wear looks even but didn't have rotors rechecked but even with brand new rotors it was there so I don't feel it's a warped rotor plus the vibration is there even when not applying the brakes.
There is only one control arm and the bushing didn't look cracked beyond the normal surface cracking I have seen on most rubber bushing. The upper support is from the strut so perhaps a bad strut or maybe strut support/cap/bearing?
At a total loss as the local garages cannot find anything wrong. My thought was a bad wheel bearing, although there is not any grinding sound that you typically hear when a hub is going bad.
Could also be the CV Joint but not sure how to tell if that really issue the issue unless I replace all the other parts first (hub, caliper, strut/support/bearing).
View 9 Replies
I just recently lowered my mk6 with h&r springs(1.2 front and rear) and installed wheels and tires from tire rack. I am noticing a lot of vibration at the wheel, pedals and seats while accelerating or moving at higher speeds. I had an alignment done after the springs were installed and all 4 tires/wheels have been road force balanced. One of the tires rated at 20lbs which apparently is acceptable but Tire rack sent me a new tire anyway, which I just had put on today.
Still the same vibration is there. Next step tire rack wants to do is switch out all 4 of my Michelin for a different tire. The guys at tires plus feel that there is no issue with the tires and I think I agree. Could the lowering springs be the problem?
View 2 Replies
I have a 4-cyl 2003 Camry LE with a bit of a vibration issue, but first, some backstory.
I put in new tires about 20,000 miles back and I started to notice a pull to the left side and no amount f alignment would fix it and there was no other discernible issue with the front end.
I read about how some tires have some internal issues with the radial belts and I decided to rotate the tires. No more pull. It didn't change the fact that the tire may be defective and still causing issues.
Could a tire that caused a strong pull on the front end cause a vibration at high speeds in the rear?
View 6 Replies
I was wondering if 1979 Dodge Vans had regular 727 transmissions, or 727 with lock ups? I was told that Chrysler switched to the lock-ups in mid year. How to confirm this? I was also told that if you use a trans on a 318 that had a lock up it would cause a vibration in the drive train at high speeds, and might damage seals in the engine and trans.
View 1 Replies
I have a 2008 Chevrolet Trailblazer. I have had 4 of these vehicles and have been very pleased. This latest one has 61000 miles and occasionally has a very strange vibration at speeds above 60 mph. It only happens occasionally and most often occurs at these higher speeds and worsens with increased speed (of 70-73 mph). The vibration is so alarming, that I will press my brakes to slow down, because it feels like the vehicle is starting to lose control. The problem is that when I press the brakes, the vibration intensifies about 3-4 fold! It feel as if the wheels are going to come off. It's a very frightening feeling. I have taken it to the shop and no one seems to know what it is. The tires are fine. Brakes are fine. Interestingly enough, if I lower the speed to 50-55 mph, the vibration lessens and eventually completely goes away.
View 1 Replies
Getting some vibration at high speeds on the highway, and when I changed my wheels, I noted that there seems to be some free play in the ball joint on the end. Is this normal? Can I replace just the end of the tie rod?
View 3 Replies
I got an 04 GLI ... When I'm driving at about 60 mph, and I apply the brakes lightly, i get a vibration in the steering wheel. it doesn't happen under heavy breaking, just when i press the pedal down lightly to slow down, and there is NO pulsation in the pedal at all during any time.
Some history of the car:
Just did pads and rotors 2 weeks ago,
car has spacers, hub centring.. the problem occurs with out the spacers also.
had an alignment a month ago.
had tires balanced 2 months ago
tires are 2 months old.
View 9 Replies
