Accent RB (2012+) :: Front Bumper Removal For Fog Light HIDs Installation?
Oct 26, 2012
Installing some fog light HID's and was wondering how to remove the front bumper.
View 7 Replies
Oct 26, 2012
Advertisement
Camry 2012+ :: 2014 SE - Front Bumper Chrome Trim Removal
How to remove the chrome trim around the fog lights and the chrome bars beside them I have a 2014 SE
View 2 RepliesPassat (B6) :: Rear Bumper Removal For Hitch Installation
I will be installing a Euro-type of hitch to my car and for that the rear bumper needs to be removed.
View 8 RepliesAccent RB (2012+) :: Front Bumper Falling Off
I have a 2012 sedan. I am not sure what happened, I don't know that I'm getting the full story. I bought the 2012 Accent for my partner, I drive an 11' Santa Fe. Anyhow, the front bumper on the passenger side appears to be separating from the body of the car underneath where it clips in under the fender/headlight area. I snapped it back in and it appeared to be secure. Went out to the garage last night and, well... it's popped back out but looks worse than it did before. Is it just clips that hold the bumper on that could have broke? And if so, do I have to replace the entire bumper to correct this?
View 14 RepliesAccent RB (2012+) :: No Drill Front Bumper Mount
I just did a front bumper repair and now I need something to mount my plate because because in Ontario we need a plate in the front and the back. I current have it zip tied to the lower grill. Any good option for a mount that doesn't involve drilling?
View 12 RepliesAccent RB (2012+) :: Fog Light Got Ripped And Hook Broke - Replace Bumper?
I have a 2012 Accent GLS with premium package. So, this came with fog lights. Few months back, one of the fog lights got ripped of its place and the body shop said the hooks which hold the light are broken and whole bumper need to be replaced for the light to be attached and quote was given for around $750.
I contacted other small body shops to just stick the light with glue but no one accepted to do that.
I don't use those fog lights anyway. So, is it cheap in a way to remove the other fog light and just fill the fog light spots? When I say fill, I am not sure what those are called which exist in place of fog lights for a car with no fog lights. I think its better than just being with one fog light.
Passat (B7) :: 2012 - Rear Bumper Removal
Looking for info on removing the rear bumper cover of a 2012 Passat?
View 2 RepliesPrius Plug-in 2012-15 :: 2014 - Installation Error With Rear Bumper Protector?
I recently purchased a Rear Bumper Protector for 2010-2014 Toyota Prius for my 2014 PIP. I thought I had it in the correct position when I removed the adhesive strips to install it but realized the next day that the curvature is not lined up properly causing a gap in between the bumper and the protector. My stomach sank when I realized this error.
View 8 RepliesPrius (Gen 3) :: Front Bumper Removal?
How to remove front bumper?
View 1 RepliesGolf VI R :: Front Bumper Removal?
I'm having trouble removing the front bumper. Does it remove like the GTI or is it different? I don't have the confidence to pull harder without knowing.
View 2 RepliesFord Super Duty (1999-2016) :: 2012 F350 - Road Armor Bumper Installation?
I am installing a set on a '12 F350 for a customer. I already had to go buy an additional hardware in order to get the back bumper on correctly...and now I'm looking at the front bumper and I swear I don't have the parts I need to install it. It appears to be missing some brackets. There were NO instructions with them (apparently a chronic problem with Road Armor) and I can't possibly imagine it bolting to the flimsy brackets that hold the factory bumper (fairing would be a better word for it) in place.
View 6 RepliesGolf/GTI VI :: Front Bumper Cover Removal?
I need to remove the front bumper cover of my Mk6 GTI. I think I know how to do it.
View 1 RepliesPassat (B5) :: Removal Of Front Bumper Cover
How do you take off a front bumper cover on a b5.5 wagon? cant find anything on the internet, I am trying to replace headlight lamps. pictures would be great too.
View 5 RepliesGolf V R32 :: Front Grill Removal Need To Drop Whole Bumper?
So I am in the process of removing my front silver grill to paint it and was wondering do I need to drop the whole bumper to get it off??
View 16 RepliesCamry 2012+ :: Front Map Light Assembly Removal
How to remove the front map light assembly. I was trying to replace my map light with LED and one of the holder came off from the assembly. Is there anyway to secure it without removing assemble?
View 1 RepliesElantra MD (2010-15) :: 2011 GLS - Front Bumper Black Lip Trim Removal
How the black trim on the bottom of the front bumper of a 2011 Elantra GLS is removed . I am talking about the black lip or air dam in the center. Does it just pull off or are there clips or something.
View 1 RepliesFord Super Duty (1999-2016) :: 2006 F250 - Front Bumper Removal?
i've done some searching but haven't found any how-to's or instructions on how to remove the front bumper on my 06 f250. Any link on how to do it?
View 2 RepliesCamry 2012+ :: How Bad Is Glare From HIDs In Fog Light Housing
I did some searching on here, but couldn't find much. I know, obviously, that adding an HID kit to a halogen housing will result in glare. So, I guess I am asking... how bad is it on a 2013 Camry? I know that the glare in some housings can be EXTREMELY bad, while some are tolerable.
View 6 RepliesSonata NF (2006-10) :: HIDs Installation - Keep Blowing Fuse
I tried installing my new DDMTuning 35W 6000K HID headlights with relay harness. No issues until I went to turn the car on and actually power them up. Neither side would work. I checked my power connection, ground, in-line fuse, swapped out the relay, tried without the harness, and nothing worked. I tried putting the stock bulbs back in and I found out they wouldn't turn on either.
I found the issue to be a blown 20 amp fuse in slot 23 (see pic). I replaced it and tried to turn the car on with the HIDs and it blew again. I hooked the stock lights back up and they seem to work fine now with another new fuse. The fuse description says H/LP LO and HID LO LH. Why this fuse is blowing. I am wondering if I just need a higher amperage fuse because of the HID power (in line for harness is 30 amp) or if something else is the culprit. I'm stumped.
Passat (B5) :: Brake Light Switch Removal / Installation
Looking for tutorials? 2003 5spd v6 passat.
View 1 RepliesPassat (B6) :: 2008 - After Installation Of HIDs All Warnings And Bulb Out Lights Went Off
I installed some aftermarket HID lights in my 08 passat. I took it to a local shop to have the drls turned off and the bi xenon turned on. All the warnings and bulb out lights went off, the lights fire up perfect. but for some reason now the lights (all of them, rear, dash, parking all come on with the ignition whether or not the lights are switched on or off.
I am sure a code got changed that causes that, but which code would activate all lights all the time? It's not DRls it all lights are on just like you turned the lights on manually.