I have an Automatic which i almost hate but that is another issue...it seems that if i am in a lower gear a punch it the transmission seems to slam before accelerating. I figured if it turned into a big problem it is still under warranty. but I am just curious considering ive driven it a year like this.
View 3 Replies2005 Elantra. After I start the car and let it idle, it will slowly start to increase in RPMs without touching the gas pedal. The RPMs will stop around 3-4k and will remain there. If it put the car into gear, forward or reverse, it will surge when releasing the brake. The RPMs will vary, rising and falling, randomly but won't return to normal idle, around 2k if I remember right.
I have recently changed my fuel pump, fuel filter and screen. Also, changed spark plugs and wires.
I know that the transmission needs to be checked, it was slamming into 3rd gear when driven in automatic, but can be avoided with manual shifting. Not sure if this could have anything to do with the new problem.
Automatic transmission fluid change. I can't find any info in the manual. What does Hyundai recommend? What mileage should I change fluid ??
View 4 RepliesI had a 2013 Elantra that I traded in for my new Accent. The last 6 months that I had my Elantra, the transmission was slipping like crazy. Mostly when it was cold, and at lower speeds. I started noticing this while the car only had 20000 km's on it. Personally, I think it had something to do with contaminants in the fluid. I told the dealership this but they just kind of dismissed it and said it probably just had something to do with the ECU messing up the shift timing or something to that extent. They made an "adjustment" but the problem didn't go away.
It got me thinking that since an automatic transmission has so many parts, wouldn't it be fair to say that metal particles from all these newly machined pieces and edges could have some initial deterioration causing a build-up of contaminants? I think a transmission flush would've resolved the issue. That's a lot cheaper than a full tranny swap down the road while the car is still under warranty, isn't it Hyundai? It's their problem now though.
I don't like the way my transmission switches gears, is it possible to make the car change gears with 0.5 revs more then what it is right now... I feel like Hyundai only considered gas mileage for this car and didn't even think about the stress on transmission and engine...
I want the car to switch gears on higher revs then it is right now..
2012 Accent GS hatchback... Automatic transmission
Getting a lot of vibration and noise when slamming on the brakes. Not like my last vehicle which was very quiet. Want to bring it in to have it checked, but if there is nothing wrong and its normal, I will have to pay them for looking at it. Always scares the crap out of me when it happens.
View 18 RepliesHow is this done?
View 5 RepliesSot he automatic transmission has never downshifted correctly for me in my "01 Hyundai Accent 1.6. I am on my second tranny, but they both never downshifted properly. For it to do so, you have to come to a complete stop for it to get back to first gear. If not it kind of bangs into first. Either that or it will dog out in third once you hit the gas, but will go into first. With my first transmission, I replaced the fluid and filter and it still did it. This second transmission has about 60k miles on it with new fluid/filter and does it.
View 4 RepliesSo I have a 2006 Hyundai accent with 75000KM on it. I notice when it shifts from 1st to 2nd gear sometimes it will jerk. It feels almost as if it goes to neutral and then sifts, causing the whole car to jerk. It use to only do it when the car was cold (first 15 min of the day) but now it seems to be doing it all the time and getting worse. I have had the transmission fluid replaced, but it doesn't seem to work.
View 30 RepliesEarlier this year, I worked with my dealer to get a new automatic transmission for my 2007 Accent. I had only had the car for a couple months (purchased used, from my Grandmother who I knew, if anything, had probably been TOO gentle with it.) Only about 40,000km. I found the car extremely hesitant to shift on cool mornings, and allowing the engine to warm up first didn't make much difference. The 2-3 shift was especially late.
The last straw was when, on a frosty morning, the transmission failed to engage 3rd, bucked back out to find 2nd again, and then got 3rd on the next try. It did this a couple of mornings before I was done negotiating with the dealer, who ultimately agreed to supply a new transmission if I paid labour. This despite the car being just outside the 5-year powertrain warranty. I was quite satisfied.
So I enjoy the Summer with no problems -- only the barest hint of transmission "morning sickness", but only if I'm rushing it. I figure "that's an economy car for you". Now that cooler Fall weather has begun, I'm convinced that the new transmission behaves the same way as the first one. I haven't had the "bucking out of gear" problem yet, but the 2-3 shift is already a real dog on cool mornings.
I have a 2002 Accent with 119,000 miles on it. Its an automatic transmission. When I am driving the car feels like it surging forward while I have the brake on...its doesn't happen all the time. But when it does it surges for half a minute, then run fine and then surges again.
View 3 RepliesMy 2004 Accent transmission with 145k miles all of a sudden started slipping while driving. It would be fine until i needed to slow down and then step on the gas again. It wouldn't catch right and it would slip. At first the pull of the slip was very slight and at times now it is very rough. My check engine light does not turn on when it slips slightly, but only when it has a really rough slip will it turn on. I had it checked at the local advance auto parts and i was told it has a 4th gear ratio that is off. The only thing that confuses me is that when i turn the car off and on it resets and works fine, that is until it slips again. If i drive carefully it usually wont slip. Could it be an electrical problem?? I changed my speed sensor when my car had about 132k miles because it went out, i replaced my ignition coils, new spark plugs/wires, tranny oil change, and filter change.
View 2 Replies2008 Hyundai Accent 3 door the automatic transmission indicator light on the center console is not working anymore.
There is no mention of it in the Owners Manual. Every other bulb is referenced. Should I junk it or replace the bulb?
What Model Number Automatic Transmission does the 2012 LE have?
When was the first year they used this transmission?
Has this transmission been used in any other cars?
Does it have the reliability record Toyota is known for, or is it too early to tell?
When my 2012 Camry's automatic transmission shifts gears in the 20-30 mph range, there is a hesitation during the shifting. I had an independent automatic transmission technician test drive my Camry, and he said my transmission had "light throttle 2-3 slide." He also noted a high frequency clicking sound in the vicinity of the transmission while the engine was running, which he said may be a malfunctioning solenoid.
View 5 RepliesAm facing a dropping on voltage power. When my truck on the idle the voltage reading 12.2V , but when I turn the HIDs and the a/c plus the a/c fan, the voltage drop to almost 9.5V , Then the transmission starts to slamming the gears. Is it the alternator acting or the Battery Which is new. I don't have the battery light on the dash but I think the dash light is not working .
View 14 RepliesAfter lurking through the site and grabbing a hold off a copy of the RB's wiring diagram, I thought I'd put my basic electronics to good use. I managed to replace the stock alarm that came with my unit to a Passive Keyless Entry (PKE) with Start/Stop button.
After all the wirings, I managed to get it to work with one minor glitch: the instrument lights for the transmission level and manual A/C won't turn on as it used to whenever I turn on my park lights / head lights. I do *think* that it's still wired as the light for the air circulation comes off when I turn on the headlight knob. I also tried to re-insert the M17 ignition switch to see if that's the cause, but the lights still won't come on. Note that the reason the M17 ignition switch was removed is because I don't want the key (now cut and covered by the push start / stop button) to trigger anything when it's turned. I only need it there now just to disable the steering wheel lock.
Where I should start checking? I'm hoping it's just a busted fuse somewhere, but if I need to tap these instrument lights to another power source in replacement of whatever the ignition switch was originally used for.
Ive got a 2013 Accent with 16,000km on it. It has an automatic transmission. The noise is when i pass from R to D, or P to D. It is an intermittent noise, so it does not do it all the time. But when it does, it makes a loud "bang" that can be easily heard and felt in the floor. Ive had it checked by the dealer, but it never does it when its in the shop.
I always let the idle go down before shifting into gear and even if i hold the brake hard to change gears it does it anyway. It doesnt matter if the trans is cold or hot. And no, i never change gears when the car is still rolling, always when i have stopped completely.
Trnasmission problems? Plug came off lost fluid. transmission doesn't work.
View 2 RepliesI installed the TurboKits CAI kit a few weeks ago. Installation went smoothly, and the latest kit has a modification to the box that fits our Accent's air snorkel. On cars with automatic transmissions, I had to cut out a notch from the bottom of the box to clear the transmission, but I doubt that this affects the air flow to the filter.
However, I have a big problem with the sound. The transmission often shifts at very low RPMs, and the CAI makes a very loud burble when this occurs. If I shift into a lower gear using the semi-manual mode, then the sound goes away. I realize that CAIs make a louder sound when you put your foot into it, but I find the sound a little over-the-top (especially considering that when the sound comes on, the engine is producing very little power at this part of the power band).
So, it's not really a problem with the CAI itself, more with the car's TCU. Unfortunately, it's too annoying for me, so I'll be reverting back to the original air intake system, and selling the TurboKits CAI.
The Accent has been working great recently until the other day when I got in to go to work and now it suddenly shifts very hard into 2nd. And sometimes 3rd.
This problem seems to come and go. Sometimes it will shift smoothly. Other times it will have to reach super high rpm and I will have to let off the gas and slowly accelerate to get it to shift. This seems to happen throughout all the gears and it does not make any difference if overdrive is turned on or off. Also reverse works just fine.
I checked the fluid and it is at the proper level. It does seem to be a little dirty (not burnt) so I am planning on changing the transmission fluid, but something tells me that is not going to solve this issue. It seems like an electrical issue to me. What it could be?
There are no codes at all on the car. Don't know if it matters but the car just turned over to 100k miles. I've been reading on here about all the problems the automatic trannys have in this car but 100k seems a bit early to have any serious transmission problems.