Not brake squeal but a squeak that is emanating from the drivers side springs or shocks. There's no noise while driving or stopping, just when you come to a complete stop and inertia sends the car forward slightly you can hear it.
View 6 RepliesI have a 2008 Accent GS 3 door hatchback AUTO (60,000 Miles). From Last week When I drive over a bump I can hear squeak / creaking sounds from Front somewhere.
View 4 RepliesStarted a few months ago didn't really bother me until now. Started when I would forget the parking brake is on and would just put the car in reverse & wouldn't move until I released the parking brake. Did it about 5-7 times and now every time I brake without the parking brake on, it squeaks & is really annoying. Is there any way to fix this or is it just gonna be complicated & expensive?
View 10 Replies2008 manual gs 38000, with the ac turned on, upon accelerating, at different rpms, I get a quick loud squeak, and engine bogs down for a second. The engine has always hesitated upon acceleration with ac since i got it, meaning it'll get going and after 2 or three rpms, it'll bog for a quick second, ive asked dealer about it every time i take it in, and they always say its normal.
View 6 RepliesIn the last 6 weeks my 2007 Accent has died when I've come to a stop. Once in traffic on the freeway and the rest at stop signs or lights. The car will start back up and won't die again for a week maybe. Nothing consistent. I took it to a mechanic and nothing shows up on the computer. I took it to the dealer, still nothing on the computer. He cleaned the throttle body I think and put an additive in the tank. Two days later it died at a stop sign. Automatic transmission. Ok, what's the problem?
View 3 RepliesI have a 2010 accent 2.0 with 110k. When accelerating from a stop it seems to hesitate or miss in the first 20 ft or so. The service engine light has not come on which indicates to me it's not in the emission sensors. Where to start looking?
View 10 RepliesMy friend has a 2007 Hyundai Accent. I don't have any picture so I'll try to explain as best as I can. He has a problem with the braking light that is on the spoiler (it's an hatchback). All lights are very dim and flickering while the two bulbs on the right are solid. I believe the light assembly is dying and need to be replaced with new bulbs. The problem I have is I am not able to get to the assembly. I have the manual shop but it doesn't include instructions for the hatchback version.
There's a few black bolts/screws on the trunk lid. I removed those, but the spoiler doesn't want to move at all. I see 3 plastic trim that are beige. I believe there's more screws behind those. I don't know where the plastic holder are for the trim so I didn't try to remove them (I don't want to brake them!!). See the attached picture with the red circle for the black screws I am talking about.
I have a two door hatchback (2010) and I love it! Simple as it is, I just can't complain. I think it is fun to drive, and easy on the fuel budget. But I digress. Because I am new to these cars, I am learning about the noises it makes and if they are normal or not. My question is this:
When driving around with the A/C on, I notice - as I come from any speed to a stop - that the A/C pump becomes audible and seems to "Wind Down." I can hear a little "whirring" or "groaning" sound which goes away (dies down) after a moment. It isn't terrible, and maybe it is normal. I just don't know! If it is not a ordinary operating noise, then to the shop we go! Also, I am going to install an aftermarket Cruise Control.
So today I noticed a weird noise coming from the back from the car when i stop like a *clack clack clack* it doesn't always make the noise so i cant replicate it, what is it? I am taking it to the dealer next week but an insight will be good....
View 7 RepliesAccent 2006. When I start the car and start to drive, the car rock on the driver's side. I think it's the driver's rear. Then the feeling of a flat tire is felt but the tire seems to be ok. Occasionally hear a loud noise like from the exhaust and when I stop at a stop sign or stop lights and release the brake the car does not move till the accelerator is pressed and it rocks again and moves. It has 99000 km on it.
View 1 RepliesI have an Accent 2008 model and i have a problem with the steering of my car. Sometimes the EPS lamp indicator turns on and the electric motor stop working. I stop the engine of my car and i turn it on again and everything is ok. Is any solution or i must change the whole steering system as Hyundai said?
View 2 RepliesI have an interesting issue that happened today after filling up on the way home from work. I have a 2011 Accent; 5 speed manual with 3900 miles. I filled up my tank and then topped off a little extra (which I now know is a no no) after the pump shut off. I put the cap back on, and after getting a cup of coffee, cranked her up and started on my way home. I drove maybe 20 feet and after coming to a stop, the car stalled. I wasn't sure at this point if maybe I let off the clutch a little too much. I started right back up and drove another 20 feet to a stop sign, and she stalled out on me again.
This time, after starting right back up, I noticed the check engine light was on, and if the car idled, it stalled. This is where it gets a little interesting. I was maybe 5 miles from the dealership where I bought my car. So I made a quick trip to the dealership to see if they could get the codes to determine the problem. After parking at the dealership, I turned off the car, removed the key from the ignition for about 10 seconds, and then started up again for giggles. The check engine light is now gone, and the car doesn't stall when idle. I have an appointment to get my oil changed, and am wondering if the codes can still be pulled?
Ok so I have I 2007 hyundai accent with a weird problem. When the car is in normal operating temperature (180-210) and stopped at a stoplight or stop sign the car will have a fluctuating idle. This problem only happens when the car is at idle and with the heat or air conditioning on. With the heat and the air condition off the car will do it once in a great while. Things I have done so far. Replace the pcv valve clean the egr. To me it sounds like a voltage problem like the car is having too much load at idle. But I am unsure. Took it to a mechanic the other day and he couldn't replicate the problem.
View 4 RepliesI recently had 2 coils replaces and 4 spark plugs (CODES SHOWING ACCORDING TO GOODYEAR) replaced because the engine light was ON. Now My car intermittently shuts off without warning, but will restart about 1 or 2 minutes later showing CHECK GAS CAP on dashboard. Went back to Goodyear thinking maybe faulty parts. They ask if any lights are on like the check engine light, they tell me if not they don't know, come back if it continues. I thought maybe it's my battery.
The guys at Battery Bills connected a devise to the battery that shows green if it's charged, YELLOW if it needs to be driven more(or issue) RED(not enough power PROBLEM) and I when back to them yesterday and they rechecked...Battery is fully charged. They said the alternator is good also, I'm not too sure they checked.Later after work I fuel up a the Chevron instead of Costco thinking maybe the gas??? My car starts then dies, the battery signal device is showing red.
I get a jump, the second the cables are connected to my battery the device shows green, my car starts right up. Pull out to the traffic light, car shuts off, but restarts. I was told to drive my car at least 30 minutes away from home and back about once a week, to keep battery charged because I live less than 10 minutes away from wherever I drive to....so I DRIVE about 5 minutes in my car starts to stutter(hesitate) twice, but smooths out and I also notice the RPM gauge is showing 0???? NO ERROR LIGHTS or CHECK ENGINE ARE SHOWING ON THE DASHBOARD so I continue home at a lost. My car is a 2010 Accent with 57,100 miles....
Dad has a Hyundai Accent that hasn't had the best service history. After discovering this I started doing minor stuff (oil & filter, spark plugs, etc) on the car. The car has done 119,000km and about 2 months ago I decided to change the auto trans fluid and filter, I don't think its ever been done before and the fluid was pretty bad. I followed the tutorials exactly and everything was fine until yesterday. It seems the car get stuck in 3rd and downshifts badly when coming to a stop. When I last drove it I got home and quickly opened up the hood. I could see smoke coming from somewhere near the trans and there was a bad smell. We haven't driven the car since and I don't know what the problem is. I've checked on google and some people have used a scanning tool to get the error code, but the car doesn't throw a check engine light so will the error code be there?
View 12 RepliesI am the owner of a 2009 Accent L (Canadian model) sedan. I have had this car from brand new and I have had two warranty issues with this car in the last 6 months. First at approx.36000 miles (60000Km) the stop light switch started sticking, so the brake lights wouldn't work properly. The second issue was the turn signal/ headlight combo switch malfunctioned and started to smoke. The dealer replaced these under warranty after some hassles.
View 1 RepliesSqueak that persists after I replaced the rear shocks. The noise started with just smaller bumps, but has no progressed to every little variation in the road. It sounds like a squeaky hamster wheel (embarrassing).
The links are tight, and even so I wouldn't suspect that they would make a squeak. In fact, one of them made a clunking noise, and I tightened it. Problem gone.
I have heard a lot of people talk about ball joints, but frankly I wouldn't expect it to start all of a sudden after replacing the shocks; so I'm not pursuing that course.
It squeaks like a creaky bed when I bounce it under my own weight in the back. Also, it makes more of a creak when settling after braking to a stop. I've looked underneath and checked the linkage visually. The removal process did take some doing to pry the old shock out and to put the new one in. I did not remove the whole lower control arm (perhaps I should have).
2004 Accent 1.6L 5spd
Purchased this car used with 64k miles on it. I am in the process of performing the 60k miles service items and going through typical replacement of worn parts.
I have noticed that my rear passenger brake drum assembly squeaks when I let off the brake pedal. Note that this is not noise when applying brake pressue, but after releasing the brakes. Additionally, the drum happens to be rusted very badly. It took a good amount of brute force to remove the drum in order to inspect the brake assembly. There was a lot of brake dust built up and I thought that cleaning that out would get rid of the noise.
I suspect it could be one of the springs but I cannot be for certain. The squeak does not occur when I release the parking brake.
So, just recently I noticed my car squeaks when I push on the gas pedal. I've researched up and down and can only seem to find that it is "Normal". It only happens at very low speeds (Stop and Go). I've read it could be anything from exhaust leak, DSG/ Tranny, belts or cv joints but nothing i've read seems to be exactly what I'm experiencing.
View 3 Repliesto explain exactly...Before coming to a complete stop,maybe driving 15-20 mph you can hear a squeek from the brakes.That is without riding the brakes.As soon as i press on the brake pedal eve very softly the sound disapears.Then when i am at a complete stop and slowly take off i will hear it again...eek eek eek.... then by 30mph plus it fades away.
View 5 RepliesThe squeak is most pronounced when the brake pedal is released, but it still makes a quieter squeak when the pedal is depressed. I can't tell which side it is coming from; my guess is the middle of the rear or the left rear. I can't tell because I have to be in the car to release the brake (I guess I could tie a string around a brick and pull on it when I'm by the rear wheels). I should mention that all three of the belts are due for a change. Which part is causing the brake system squeak? The brakes work; replacing the squeaking part or parts is going to be lower on the project queue than the CD player/radio errors and replacing the belts, pulleys, etc. in the engine compartment (I've posted elsewhere on the forums about those issues).
View 5 Replies