Accent MC (2006-11) :: Rear Drums Clicking When Applying Brakes?
Jan 2, 2013
I am having a issue with my 07 accent. Had front rotors and pads replaced because they needed to be. Clicking continued. Had drums and shoes replaced last month. Clicking went away for a few weeks. Recently started back up just the other day. The clicking is only when applying the brake and it sounds like it is coming from the right rear drum. It doesn't interfere with stopping, but it s so annoying and brakes shouldn't make that kind of noise anyway.
View 7 Replies
Advertisement
I took my car in about three months ago when brake indicator started squeaking in the rear. Shop told me that the drums, shoes and wheel cylinders needed replacing. After spending a few hundred replacing all those parts, the squeaking began. It's a kind of rhythmic squeak that starts towards the end of braking. the rate varies with the speed of the car, so it definitely seems to be coming from the brakes. I took it in not long after. They said they only heard a clicking noise, and that was because the brakes were mis-adjusted. They re-adjusted it. I drove it home. The squeaking is still there. This also happens a lot more when it's heated up so maybe that's why they didn't hear it in the first place.
I take the car back. They said the drum has been warped. They replace the drums. I take it home. Still squeaking a few days later, and I feel the brake pedal pulsating now. I take it back in. They say the issue is from the front brake rotors being warped. I get these replaced elsewhere with ceramic pads. Squeaking is still there.
I take it back in to the original shop because I'm certain it's from the rear. They look at it again and say the drums are warped, again, and that they'd never seen anything like it. They turn the drums. (and receipt says there will be no more warranty on the rear drums... what?)
Unsurprisingly, squeaking did not stop, not even the day after. I took it to a different shop. They spent all day on it and drove it around with me and their final word is that the reason for the squeaking is cheap parts. They recommended I call the original shop and ask for factory parts and offer to pay the difference for the parts.
View 11 Replies
I have a 1998 f150 4x4 4.6 triton V8 regular cab, I would like to ditch the rear drum brakes in favor of disk brakes. is this an easy bolt on project? I do know that 2003 f150's had rear disk brakes and was wondering if i bought those parts if the procedure would be fairly easy. I know i would have to take a check valve out of the master cylinder to gain pressure to the rear.
View 8 Replies
I have A 97 F-150 4X4 with rear drums. I noticed the brakes felt like they weren't releasing right away after i let of the brake pedal. i took drums off and noticed on the left rear the front shoe moved normal but the rear shoe didn't move at all. on the right side front shoe moves normal rear shoe very very slow, and i could see rear shoe was worn way more than front. So I replaced on both rear the shoes, all the hardware, springs, wheel cylinders and brake line from cylinders to the proportioning valve.bleed the brakes, and adjusted the drag on the drums. Now i drive it, test it out, feels like the same issue is going on. feels like im driving with the brake on, and right rear gets really hot. Did i miss something? not do something right?
View 4 Replies
I haven't noticed it before but applying the brakes after driving thru snow I get an awful crunch sound. I have stopped the car a few times to look and it appears the wheel wells are clogged with slush but I don't know if that's whats causing it. After the crunching sound if I'm driving on a clear road there is no noise if I brake. Its much worse than say the crunch you get if the brakes are wet. Whats up with this?
View 3 Replies
I have 2012 accent. I purchased it in May 2014 when it had 35,000 miles. Now it has 75,000 miles.
Sometimes I hear sounds when brakes are applied..this happens mainly when going down on sloppy roads with pot holes. lets say if i see a signal turning orange and I apply brakes intermittently to stop vehicle, i hear rough sounds like 2 metals hitting when car goes over those pot holes. hope i made sense. sometimes it comes when its raining heavily and brakes are applied. other than that, this sound doesn't come during normal ride and normal breaking.
What could this be? Firestone does inspection during every oil change and they said all is good. I don't know if they check brake system.
View 2 Replies
A while back I posted a thread trying to fix a clicking noise coming from the front end on my F-350 dually when applying the brakes at slow speeds (under 15 mph).
While returning from our camping trip last week the noise is back again. It does not occur after the truck sits overnight or for a few hours. But after driving for 30 minutes or longer the clicking will return when I apply the brakes at slow speeds. I tested the rotor temps with a heat gun and it seems to start when the rotor temps get above 120 degrees F. So I removed the brake pads & calipers, regreased the slide pins, cleaned up the pads and applied some lubricant on the back of the pads. I also bent the pad clips so they would fit snugger/tighter in the slots.
Whatever I did seemed to cure the clicking while driving around this weekend. I made sure I got the front brakes nice and warm - up to 180 degrees or so.
When I did this same procedure a few months ago the clicking went away - but eventually returned.
Should I get some better clips? Replace the sliding pins? Pads? The rotors & pads were replaced this winter & the shop said they and the labor are still under warranty. But if they use the same clips - I'm concerned I'll be back to square one in a month or so.
View 14 Replies
Over the past few weeks, I have noticed a clicking sound coming from the right rear brake when they are moderately applied when stopping. Doesnt seem to happen under light braking. I figured something in there must have gotten loose so I got to taking the drum off to inspect and clean the insides, or see if anything was broken. Everything seemed to be in order, inside of the drum looks fine as do the shoes, Nothing is really jumping out at me as a cause to this noise. I hit the brakes with the shop vac to suck out any brake dust I could get.
Then, with the drum off, I had my fiance apply the brakes a few times, and the parking brake, just so I could see if something in there was not operating as it should. Heh. I dont think you are supposed to do that with the drum off. The shoe adjuster fell off the shoes (#2 below) So I had to get that back in place and I am pretty sure I have it in right. I go to put the drum back on, and the pads are now too far apart and it wont go back on.
So, I decide to try opening the bleeder valve on the brake cylinder to see if I can get the pads to move in at all. it drips but I cant get the pads to budge. Then I shortened up the shoe adjuster all the way so I could get the drum back on.
Now my parking brake lever, I have to pull it waaay up to even get the parking brake to engage. I figure I have to go back and crank that adjuster out some so the shoes engage sooner. Also, I probably got air in the brake line when I opened the bleeder, so I have to bleed the brakes for real.
View 18 Replies
I am noticing an audible vibration coming from the rear of my wife's 2004 Sienna van when applying the brakes. I have inspected and confirmed there are no fluid leaks,there is ample material left on all pads and the pads still fit snugly into the retention clips. Also, the pads and rotors show no sign of uneven wear. Front brakes were replaced in 2009.The van currently has ~63000 miles on it.
View 2 Replies
I've had my Accent for a year and a half and now it has about 23k miles on it. I noticed that whenever I would apply the brakes, and the lift my foot off the pedal, I would hear a squeak . . . kind of like a squeaky door. It would happen every time I would lift off the brake pedal. At first, I thought it was the pedal itself, then I rolled down the window and realized it was coming from my rear drums.
So I took the rear drums off which was a PITA to get them off, and used some brake cleaner and white lithium grease on the backing plates of the shoes and on the springs, and the squeak is gone!
I suspect this is probably an issue with drums since it's a relatively closed system and brake dust tends to accumulate in there. Any good technique to remove the rear drums, other than using a hammer to tap it loose?
Here's a pic of the rear brakes with the drum off.
Uploaded with ImageShack.us
View 7 Replies
My read brakes have been grinding. I bought new pads to replace them. After pulling the drums I noticed that they were hardly worn. 50,000 miles on the car. They was a bunch of brakes dust in them. Cleaned the dust out and put the drums back on. It was quiet for about 3 weeks, now the grinding is back.
View 3 Replies
I am getting a ticking sound when i am slowing down (applying my brakes) at say 35/30mph. The sound stops when I stop. This problem starts after my car warms up; doesn't do it when I first start up.
I've taken the car to 2 Hyundai dealerships and a certified mechanic and the problem continues. I first noticed this about a month ago.
So far no one seems to be able to find the problem. The mechanic did try by replacing the front brake pads. He said something about a "shims piece " and thought if we replace the front pads that would take care of the problem. The rear brakes or ok.
I'm still having the problem and I wonder if it's the rear brakes after all. I don't know what I can try now. Someone suggested going to Brake Check. I have about 1000 miles left on the original warranty.
View 1 Replies
2006 Sonata V6. Front brakes only squeal when applying them while in reverse. Happens all the time......cold/warm start, cool/hot weather, dry/humid air. Squeal is extremely loud. I have searched and found similar but nothing exactly like this. Pads and rotors are fairly new and I have removed them and reinstalled and regreased twice. I am using ceramic pads and have never used them before. Is this common with them?
View 8 Replies
2001 F150--V8-4.6-3.55--8.8. 221000 Miles. Changed front rotors and pads. Had scrubbing noise from right rear when applying breaks heavily. Changed rear rotors and pads. Still have scrubbing noise when breaking hard. I do not hear any noise when driving regular or when normal breaking. Differential fluid was a tad low. Applied fluid. Still have scrubbing noise. No leaks at hub seal or pinion. Bearings ? Maybe?
View 5 Replies
I have a 06 accent sedan and I have been having some issues with the back brakes that were just replaced prior to the motor vehicle being done the end of June. I had the brakes replaced and everything was working fine up until the middle of last week; now the brakes in the back are squealing like the warning plates are rubbing together again (loud high pitch squealing) what could be causing this...I took it back to where I had the brakes replaced and they did a check and said that it did not look like anything was wrong and they asked me when my front brakes were replaced, I told him they were replaced last August when I have a issues with a caliper freezing up and had to replace everything in the front (brakes, caliper etc). So long story short he said to keep driving and see if you can tell if the squealing is coming from the front or the back and come back when its happening or if you can determine which one it is..
View 13 Replies
My husband bought a 1997 Ford F150 and the seller said he changed the brake lines, but the back brakes have dragged on takeoff since he bought it. Just put new shoes on it and it's still doing the same thing, but now the drums are getting hot. Is it possible that the seller got the brake line backwards and that might make the back brakes drag?
View 2 Replies
My c is about 5 12 months old now, and the rear brake drums are already covered in rust.
View 9 Replies
Brake rear drums overheating on My LC 80 series '90 GX model has been having reoccurring left side rear overheating after driving for 2-3 hours in traffic. It has been worked on many times since the lastest attempt both sides heated to about 100-110+F on the rim with the right one the hotter. The wheel cylinders have been replaced, the brake shoes, bearings and seals on the left side in the hub with the springs, self adjuster and cable in the drum, the front disc pads also. There has been some engineering: welding on the lh rear axle diff tube which was done. The problem stressed out the last mechanic. He wants to replace the master cylinder next. Remove self-adjuster mechanisms is it a possible fix?
View 19 Replies
I have a 2002 KIA Sedona that I just had new drums, brakes and brake kit put on. The braking is fine, however I hear a clicking sound from the backend now when I apply the brakes when I just about come to a stop or lightly braking in my neighborhood. What is causing it and how dangerous is it?
View 4 Replies
I am trying to fix the rear drum brakes on my girlfriends 2010 corolla. So I replaced everything (everything is new) and i took it for a drive to find some SERIOUS rear vibration and clunking. I tried adjusting the rear pads and everything.
The clunking/vibration does not happen in reverse. I don't know what to do to fix this. I have tried the self adjusting e-brake in reverse method.
-clunking happen both when applying the brake pedal and the e brake while going forward
-clunking and low speeds and major vibrations at high speeds all while braking
View 14 Replies
I am getting this weird clicking/ticking noise coming from the rear of the car. I might have to let someone drive the car and follow and listen for myself (but i dont like other people driving my car), but its definitely coming from the rotation of moving.
It is audible moving forwards and reverse. It speeds up as the speed increases. It comes from the passenger side and can hear it mostly from the sound bouncing off things from the outside. I cant feel it, its just an annoying sound. I still hear it while applying the brakes. Sort of sounds like flicking sound. Pads have plenty of life and changed my rotors about 20k ago.
I've read somewhere about brake pad spring busting but its still audible when the brakes are on so I don't think that's it.
View 1 Replies
