Accent MC (2006-11) :: Loud Noise From Exhaust When Stop And Release The Brake
Oct 6, 2014
Accent 2006. When I start the car and start to drive, the car rock on the driver's side. I think it's the driver's rear. Then the feeling of a flat tire is felt but the tire seems to be ok. Occasionally hear a loud noise like from the exhaust and when I stop at a stop sign or stop lights and release the brake the car does not move till the accelerator is pressed and it rocks again and moves. It has 99000 km on it.
View 1 Replies
Advertisement
I recently noticed that when I release the parking brake on our new 15 F-Sport it make a loud noise. It's hard to explain, but it kind of sounds like a spring being released with a clunking sound. (Sorry for the weird description).
When I press the brake to set it I am not pushing it all the way to the floor or forcing it at all. I am just using normal pressure to apply it.
View 5 Replies
I was driving down the street earlier today, when I heard (and felt) a loud *clunk* from under the car. At first I thought it was a blown tire from the way the car was handling, but then I heard the grinding/screeching sound. No matter what gear I put the car in (even neutral), it makes the grinding noise and won't move. I've narrowed it to to either a transmission issue or a problem with the drive shaft.
View 5 Replies
The squeak is most pronounced when the brake pedal is released, but it still makes a quieter squeak when the pedal is depressed. I can't tell which side it is coming from; my guess is the middle of the rear or the left rear. I can't tell because I have to be in the car to release the brake (I guess I could tie a string around a brick and pull on it when I'm by the rear wheels). I should mention that all three of the belts are due for a change. Which part is causing the brake system squeak? The brakes work; replacing the squeaking part or parts is going to be lower on the project queue than the CD player/radio errors and replacing the belts, pulleys, etc. in the engine compartment (I've posted elsewhere on the forums about those issues).
View 5 Replies
I am the owner of a 2009 Accent L (Canadian model) sedan. I have had this car from brand new and I have had two warranty issues with this car in the last 6 months. First at approx.36000 miles (60000Km) the stop light switch started sticking, so the brake lights wouldn't work properly. The second issue was the turn signal/ headlight combo switch malfunctioned and started to smoke. The dealer replaced these under warranty after some hassles.
View 1 Replies
2013 accent auto My car rolls noticeably after parking unless the ground is completely flat. Parking brakes prevents it from rolling but I don't use parking brakes every time. Another brake problem I have is thump or clunk noise I get whenever I release a brake from stop.
View 12 Replies
Accent 2008 (155,000 km) .... Walter pump, all belt, timing belt, pulley where changed @ 120,00Km when i bought the car.
**No code showing in dtc no check engine light**
I've been losing power uphill, RPM at 4,000 and and losing speed. I heard a loud sound coming from the front starting at 2,500 rpm and up (like if the exhaust air is struggling to get out), not sure who to explain that accelerating noise
On Flat surface it's slower accelerating up to 3,000 rpm with that loud sound. It's like the more i pressed on the gas pedal, the less acceleration i get.
**Running idle up to 4,000 rpm in park, no loud noise, engine running normal sound with no lack in acceleration in RPM**
2 weeks before I had 2 ignitions coil going bad at same time, i run it about 2 miles before changing them, and the exhaust/catalytic converter came hot and melted the plastic dust cover under the car near the catalytic converter.. Did I premature burn or plug that catalytic converter?
Would it be catalytic converter? Fuel pump? Fuel Filter..
I thought of buying a catalytic converter cleaner and put in fuel tank and up the intake..
View 21 Replies
My Hyundai Accent 2006 with 98000km has a noise when the brake is released. Braking is ok and seems to work well. This noise comes from the back when the brake is released.
View 4 Replies
Having issues with brake noise when only in reverse? I have extremely loud break noise only when I reverse out. Could this just mean I need to get a break change?
View 14 Replies
Car was great this weekend, then on saturday, every time I shift my car clunks right near the tranny when I release the clutch. Its a loud noise. Clutch was done around 2500 miles ago. South Bend stg 1 with a LWFW (I know, wish I stayed with a DM). And if I drive in first and second and come off the gas without shifting, it also knocks once really loud. It isn't a back fire or anything it almost feels like the dogbone mount is bad? Also, over 4000 rpm my car sounds deeper sounding than before.
View 7 Replies
Just noticed this the other day, when depressing my GF's 2011 Accent's brake pedal it made a low hissing sound, it would go away when you took your foot off the pedal, you would never hear this with the radio on, but it was enough to make me think it could be a concern.
Drove the car and it didn't affect the brake permormance, but the longer this goes, I can't imagine this being a good thing.
Car is 3 years old, and has 80-20 city/hwy driving under it.
View 7 Replies
Lately when I drive my car, I hear like a steam pressure release noise.. And happening ONLY when I have my Fan on in the car.
Sometimes it's soft and sometimes is a long loud one, and then you can feel the car holding in. (like quickly hitting the brakes a little bit)
How to explain it. I have a 2004 Hyundai Accent 2 doors.
View 5 Replies
I've got a strange noise coming from the front brakes. It's not the wear indicator, and it's not a worn out rotor.
When I apply the brakes firmly, they work great. No noise, good stopping power, the pedal is nice and firm. As soon as I let off the pedal, there's a little chirping noise, like a tiny bird in my wheels... I've looked at the pads and rotors, and there's no obvious sign of damage or wear.
My guess is it's the caliper pins or piston making the noise. I'm happy to take it apart and lube it, but what kind of lube is specified for this? Moly grease? Lithium grease? Some kind of oil? And do I apply it only to the caliper pins, or to the piston as well?
I looked on HMA service, but I can't seem to find anything to address this specific problem.
View 5 Replies
I just bought a 03 accent the same day i bought it the CEL came on got it read and it was cylinder 4 misfire. took it to the garage the dealer i bought it from takes it to he said there was a little water around the boot in that weird little channel area under the cover he said he cleaned it up dried all out then reset the code and it was good, for a little about 2 weeks later it comes on again i get it read and it says cy 4 misfire again but also P0133 (o2 sensor bank 1 sensor 1) and i cannot remember exactly but i think the CEL came on after the exhaust started sounding loud, like it has one of those ricer mufflers on it.
Well I jacked up the car today and looked the only thing i saw was after the first cat right before the braided flex pipe there is this weird "shield" looking piece on the underside of the exhaust pipe dunno if its really supposed to be there or what it is for but from somewhere under that piece i can see exhaust coming out(its cold right now) also the flex piece is kinda blackened like its had exhaust fumes blowing on it for a while. i cant imagine why this would be a normal thing but i have never worked on hyunda before. i am thinking if there is some sort of "leak" there that is why the o2 code is showing. i am stumped, esp on the cy 4 misfire all sparks and wires look good i pulled each wire with it running and it bogs down til i plug it back in.
View 4 Replies
I'm having issues with very loud screeching noises on my 08 awd. Sounds like a garbage truck. Lexus said its $625 to replace brake pads and rotors to stop the noise. I'm not really a fan of DIY so is that a fair price for the parts and labor or should I bring it somewhere else?
View 14 Replies
My right rear brake is making a grinding noise when the brakes are applied. I took the drum off a couple weeks ago and the shoes are just a bit worn. Just getting into the numbers printed on the side of the shoe material.
I could not see any thing that would be making the metal on metal sound. Are there any wear indicators on the OEM shoes?
View 9 Replies
My brake pedal is making a creaking noise when depressed and can also be heard when letting off the pedal. The noise is not coming from the brakes themselves (front/back are like new) but the pedal area or somewhere behind it. This noise doesn't start until I've driven the car for a little while. The brakes work fine for the most part but sometimes feel a bit spongy if making a sudden or hard stop. The fluid levels are fine.
I'm taking it in on Friday and hoping that the brakes just need to be bled a little or maybe the pedal just needs lube, but I'm worried it might be the booster or master cylinder---if it is one of these?
View 4 Replies
I described about 3 weeks ago this loud metal sound coming from the exhaust with any revs above 4k at stop or on the road. The car sounds like a Z06 Vette with out the cats on-it is really a loud disheartening sound. The VW stealership replaced the whole exhaust but the sound is still there. Where I should direct them to look??
View 6 Replies
The other day, I changed my front brakes just the pads. Everything came out smooth but then later that day i started to notice a clicking noise coming from the passenger side brake I suppose. You can't hear it when you drive or when braking early but you start to hear it when the car slows down and your coming to a stop. Its a constant clicking noise within like 1 or 2 seconds of each other. Its not loud, but its very noticeable with music off. And not to mention, very annoying.
I'm about to take everything apart and reinstall everything to see whats up. BTW its a 2006 GS300 Front brakes. Finding a picture of the wheel off with rotors and whole brakes on. I think I might of put on a clip wrong.
View 11 Replies
The speedometer on my car works intermittently. When I accelerate and release I hear a loud clicking noise and my speedometer and rpm stop working. It will jump from different speeds dropping to zero. Is my speedometer on its way out or could it be something else?
View 2 Replies
Really enjoying my first Lexus RX350, but there seem to be some noise issues...
1. When shifting the gear, especially in the morning, from P to R, it is not smooth making some annoying noise. Is this normal?
2. Also, when releasing the break, there is some sort of a "thump" noise.
Don't think it is a big deal, but just wondering if these are considered normal.
View 6 Replies
