I was driving down the street earlier today, when I heard (and felt) a loud *clunk* from under the car. At first I thought it was a blown tire from the way the car was handling, but then I heard the grinding/screeching sound. No matter what gear I put the car in (even neutral), it makes the grinding noise and won't move. I've narrowed it to to either a transmission issue or a problem with the drive shaft.
View 5 RepliesI own an automatic 2009 Accent. I'm at 95,000KM.
Anyway, the problem does not occur all the time and appears to be entirely random.
When I start my car, on occasion, the car will make a CLUNK sound when shifting from park to reverse or drive. When it does CLUNK, you can feel the car lurch as if something fell out of place. The sound is quite audible, even with the radio on. The sound and lurch is not as pronounced when shifting to reverse. It doesn't seem to happen when going to neutral but is very obvious when going to drive.
Turning off the engine and restarting it seems to resolve the issue. Once I had to restart the engine twice before the clunk stopped.
Attempting to drive when the car does this sound results in increased RPMS. Usually when driving the RPMS sit between 2000 and 3000 but would jump to between 3000 and 4000 when the clunk occurs. Usually, the car will want to crawl forward if I'm not on the brakes but with the clunk, the car need quite some gas to start going forward.
Here's where it gets scary:
On two occasions, while driving on the highway at 100km (65 miles), I'd feel something slip and then suddenly my RPMS jump up by 1000. On both occasions I had to pull over, turn off engine and restart the car and the issue stopped.
Clearly, whatever it is that changes gears is slipping but the fact that it slips while driving just freaks me out.
Accent 2006. When I start the car and start to drive, the car rock on the driver's side. I think it's the driver's rear. Then the feeling of a flat tire is felt but the tire seems to be ok. Occasionally hear a loud noise like from the exhaust and when I stop at a stop sign or stop lights and release the brake the car does not move till the accelerator is pressed and it rocks again and moves. It has 99000 km on it.
View 1 RepliesAccent 2008 (155,000 km) .... Walter pump, all belt, timing belt, pulley where changed @ 120,00Km when i bought the car.
**No code showing in dtc no check engine light**
I've been losing power uphill, RPM at 4,000 and and losing speed. I heard a loud sound coming from the front starting at 2,500 rpm and up (like if the exhaust air is struggling to get out), not sure who to explain that accelerating noise
On Flat surface it's slower accelerating up to 3,000 rpm with that loud sound. It's like the more i pressed on the gas pedal, the less acceleration i get.
**Running idle up to 4,000 rpm in park, no loud noise, engine running normal sound with no lack in acceleration in RPM**
2 weeks before I had 2 ignitions coil going bad at same time, i run it about 2 miles before changing them, and the exhaust/catalytic converter came hot and melted the plastic dust cover under the car near the catalytic converter.. Did I premature burn or plug that catalytic converter?
Would it be catalytic converter? Fuel pump? Fuel Filter..
I thought of buying a catalytic converter cleaner and put in fuel tank and up the intake..
What could cause a suspension noise? Dealer says nothings wrong... Going over broken pavement etc it makes a nasty clunk sound sometimes, only at low speeds above 40 kmh... It's as if it goes clunk/crick, then goes away, switches sides then comes back...
View 24 Replies2002 ford explorer 4x4 150k miles when i put it in reverse a loud clunk noise but when put in drive no clunk noise. But on highway when its shifts a very loud clunk and like a real hard shift !!!!!o/d light is flashing also .transmission shift solenoid ? rear ?
View 8 RepliesJust picked up a new 2014 rx fsport and 75% of the time I release the e-brake it has a loud clunk as if metal smashing metal. I tried releasing it really slow and it still does the same. The vehicle is parked on flat pavement. It is not a low click noise that I am used to but a loud clunk.
View 6 RepliesWhen I put my car (04 s60 2.5t) in reverse it hesitate, then when I press the pedal it roll back with a loud clunk noise. But if I put the car in drive before putting it in reverse everything goes smoothly.
View 2 RepliesI was pulling out of the driveway and heard really loud snapping noise. Jumped out of the car expecting to see damage, but everything looked fine. I didn't drive over anything or hit anything.
Now, I notice that when my left front wheel goes over bumps and potholes there's this metallic rattle. Took it my mechanic right after and we both looked the front suspension over. Everything looks good. It does drive fine.
I have a '05 4X 6.0 PSD... that has a loud clunk or pop noise from under the drivers and passengers floorboards. I've done A LOT to try and fix this noise... and know, it's definitely due to frame twist. As I can drive straight, on flat ground and it'll never happen. On a dirt road, with stutter bumps... still, nothing. When the road is off-camber, or I have an S-Turn the CLUNK will be there, and sometimes more than once (seemingly if the load change is enough).
If I'm off-road, and the road is off-camber or has my X articulating 1-2' in either direction side to side or diagonally, the CLUNK is so annoying, so bad, I think the X is going to fall apart.
So this past weekend, I had my fiance' roll back and forth (about 20') over a small dirt embankment, while I was on my hands on knees outside next to the running board. And boy... it's a LOUD clunk, and I can feel it on my feet in the X... or if I put my hand on the frame. But, for the life of me... can't find the culprit.
I have a UK 2006 Mk2 CDX+ which I was driving last night - seemed ok, got to our driveway, turned the steering wheel fully left so I could manoeuvre the car into the driveway when I heard a loud "clunk" noise.
I thought I ran over a bottle or something so carried on reversing, when I got out I noticed the car was parked diagonally! Thought this is strange, I don't park like that and tried again, a bit better but still not parallel! I then noticed the steering wheel was hard to turn, a grinding like noise is heard when I turned so I decided I would need to take into the local in the morning.
Started the car today and drove out and got immediate sensation that steering was not connected to the wheels, the SW was off centre by miles and turning left/right was very sluggish. Lucky the garage is only down the road (but it's not Hyundai specialist) from me as I would not risk driving it down main roads in this condition. Guy at garage asked me to fully turn the SW left to right and we can see that the front of the car actually moved during the process. He is going to take it up on the lift to look underneath.
My boyfriend bought a 1999 ford explorer, he put about 2,000 miles on it in four months... I believe it now has roughly 110,000... Now the other day, he was pulling out and shifted from reverse to drive, we heard like a loud clunk/thump noise... It shifts into drive, and revs but won't move, it feels like neutral... If you shift to second, first, or reverse it's fine... Tranny fluid is good... O/D is always engaged...
View 3 RepliesI took my truck to an alignment shop to have him look over my truck to find a steering wheel jerk and a loud clunk noise. He believes it's in the transfer case driveline. Said to remove the driveline then drive it around and see if it goes away, if it does then that's the problem. So to the question, how to properly take this out? Do I need to make marks with a paint pen anywhere to line things back up or does it matter?
View 14 RepliesLariat stepside, 5.4L with 150k miles. Loud popping noise, almost a clunk, when making a slow sharp turn. Put it on jackstands and did the normal tire grab and shake and found no issues there. Tie rods, ball joints and sway bar links all seem tight. Looked for signs of unusual rubber to metal and metal to metal wear and found nothing. The only thing I did see was the rubber boots on the upper control arm ball joints were split. What I have checked or if I am missing something?
View 9 RepliesFor the past few months I've been hearing a loud fan-like buzzing noise coming from the passenger side of the front of the car. I don't know that much about cars, but it almost sounds like the engine is racing or something is spinning too fast. It has gotten increasingly worse, and seems especially loud at high speeds on the highway.
It is not the heating/cooling fan - the noise is present when the heating/cooling system is turned off.
Ive got a 04 f350 that after u shift into 4hi or 4lo when u accelerate it it makes loud clunk noise in fwd or reverse hi or lo. With hubs unlocked it still clunks. Have checked, wheel bearings, axle U-joints, and driveshaft joints all good. So I am thinking I've got issues in t-case. Popped drain plug out and wow that dex merc 4 looks nasty. So thinking I need exploded view of transfer case.
View 4 RepliesNew truck 11000kms ago thats done medium amount of work but nothing heavy or sustained for long periods of time. I get the feeling of clutches slipping especially when truck is cold but also when normal temps. Doesnt make any weird noises or anything. I can really notice the difference in torque if in manual mode being much better, but still not perfect if i stomp on the gas pedal and go through the gears in manual mode will still slip. Also is really harsh shift if i come to a halt in 3rd manual mode with the brake pedal depressed push minus button the truck makes very loud clunk noise into gear 2 then 1. Took it to ford they couldnt find anything ? Thinking of trying another dealer.
View 2 Replies2008 manual gs 38000, with the ac turned on, upon accelerating, at different rpms, I get a quick loud squeak, and engine bogs down for a second. The engine has always hesitated upon acceleration with ac since i got it, meaning it'll get going and after 2 or three rpms, it'll bog for a quick second, ive asked dealer about it every time i take it in, and they always say its normal.
View 6 RepliesIt's cold and raining quite hard out and I just took my car out to the store and when I pulled into the parking spot a very loud squealing noise began coming from under the hood (sounded like driver side). I turned the car off and restarted and it was still there. I turned it off again and started it and it was gone. I drove the car home without issue and restarted a couple of times with no noise. The car ran great otherwise. What that was? I know very little about cars. It scared the crap out of me--it sounded quite loud--more of a screeching sound.
View 18 RepliesI have a 06 accent sedan and I have been having some issues with the back brakes that were just replaced prior to the motor vehicle being done the end of June. I had the brakes replaced and everything was working fine up until the middle of last week; now the brakes in the back are squealing like the warning plates are rubbing together again (loud high pitch squealing) what could be causing this...I took it back to where I had the brakes replaced and they did a check and said that it did not look like anything was wrong and they asked me when my front brakes were replaced, I told him they were replaced last August when I have a issues with a caliper freezing up and had to replace everything in the front (brakes, caliper etc). So long story short he said to keep driving and see if you can tell if the squealing is coming from the front or the back and come back when its happening or if you can determine which one it is..
View 13 RepliesMy 2000 accent (manual) suddenly started making a LOT of road noise - like I'm driving on off-road tires. It's speed-sensitive. At 20MPH, it sounds like a trilled R, spanish style - like in "perro." Above 30, it's just a roar.
It's there even with the car in neutral and engine off. It goes away completely when turning right, such as on a freeway exit ramp. It does not go away when turning left.
CV boots are intact, no grease to be seen. It started with a set of tires that were due for replacement, so I replaced 'em and the noise hasn't changed. I've jacked it up and don't notice anything unusual when spinning the tires by hand. I even had wifey spin them while I was under the car feeling around the shafts - nothing interesting.
Also, occasionally, I hear a single "doing" sound (like metal rod striking something), from what sounds like front center of the car. Might be unrelated, but I never noticed it until the road noise started up.