I go in this week to recheck my nagging check engine light. Flashes after a warm start, then stays on. Been there once already for it, it has come on too after a cold start... Last time they said it was a very vague miss fire code.... It did shake a bit... On the plus I get to drive a nice new Elantra again.... On the down, I never want my car back after driving it ...
View 2 RepliesMy wife was about to go into work today and when she started the Accent she said it started rough and revved up two or three times and the check engine light flashed 5 or 6 times. The light stayed on solid after that but there was no loss of power, smoke, low gas mileage or vibrating or any other symptoms after initial start up. I plan to take it to an auto parts store tomorrow (the car is at her work about 20 miles away) and get the code read. What I may be in for? I'm hoping its something simple. I told her to check the gas cap just in case.
View 24 RepliesI just bought this car from the original owner. She didn't take that great of care of the car. First oil change was done at 8,000 miles for example. Basically if it was broken she would fix it, but didn't do much preventative maintenance.
I just replaced all 4 spark plugs and coils since one was misfiring and didn't want to have to go back in and replace one in another few months. Replaced the AC belt a few days ago since it was cracked and worn. All other belts are fine. I drove the car around for a few hours the next day and it ran great.
Today, the check engine light flashes and then stays on. The car is idling rough at stop lights and acceleration is poor. Previously, the light came on and it was the EVAP system. Not sure which component and I was told it isn't supposed to affect the way the car drives.
I have a check engine and air bag light that stays on. I was told if I dis-connect the battery, it will clear the codes. I need an inspection and I'm short of time.
View 1 RepliesYesterday my car had a rough start (lasted all of 5 seconds) and it threw the check engine light on. Now other symptoms. It was a rough start, almost like a misfire then it idle fined, and drove my 60 mi commute home without issue. I had fine acceleration, gas mileage idle etc.
I got home and turned it off for 10 min and it then started normally and ran fine again. I'm thinking it was just a random miss that threw on the light, but I'll take it to Advance to get the code later today.
I replaced the plugs about a year ago with cheap-o plugs so it may be time for a replacement again. I thought maybe an o2 sensor but there wasn't a drop in mpg, at least anything noticeable.
And its been a few days since I've gotten gas so I'm doubting just a gas cap issue... The CEL did NOT flash, only solid the whole time.
I have been experiencing some issues with my '06 rio5 (same engine as your hyundais). this forum is way more active than the kia forums, so figured id give it a shot here.
I am experiencing a rough idle at start up while the car is low on fuel (<1/4 tank). it idles rough for a few seconds, the check engine light flashes a bit, and then it runs fine.
The car is an '06 rio5 with approx 19k miles on it, five speed manual. Also, sometimes after refueling and it will just shut off while waiting at an intersection. Not sure whether these two issues are related, but thought i would mention it just in case they were.
Having some issues with my 2003 Alero 4 cylinder. Upon start the entire engine shudders and the check engine light flashes. I have to turn it off and turn it on and it will stop most of the time. I've taken it in and the mechanics can't get it to reproduce the same issue for them. Just replaced all four plugs, boots, ignition coil.
View 1 RepliesI have a 2001 ford taurus. just changed the engine with a used engine has 130k, did tuneup changing all spark plugs, wires and distributor cap. Also changed the 02 sensor upstream. And the check engine light remains on. if i start the car and it idles the check engine light flashes. but once i drive it, it just remains on. brought to the mechanic and he put on the machine and it reads that the problem is the 02 sensor upstream and the spark plugs misfiring. my mechanic is lost not sure what the problem is. someone told me it could be the manifold gaskets and pedlum gasket.
View 1 RepliesMy girl friends car is doing something interesting, well it started off the car died while she was driving home from work, so I towed it with my truck home, the alternator had went bad so i changed that, but no here is where the problem comes in that i cant figure out, the car will start and run for about 3 miles than it will die in and out, loose power but not kill the engine and the check engine light flashes, and now the radio does not work at all (at idle or running) and the head lights are dim.i tested the battery, it was with in ranges for cold starting, output while the car is on and a few other thing, i re checked my belts and they are all tight and in the correct alignment ...
View 9 RepliesThis morning started to drive to work and the check engine light came on or actually did not go off. Not sure which. Anyway it is a steady light not blinking and the car runs fine. Problem is that the warranty is out by about 3 weeks, not by mileage and I have an appointment at the dealer on Monday. If I take it to Partsource and have the code read will it delete the code or turn off the light. Just wondering as I don't want to spend money at the dealer if whatever is wrong is not covered under the emissions warranty if I can get the code and fix it myself. Don't want the code deleted either if the dealer needs it.
View 2 RepliesAs the title says, my CEL goes on and flashes too.
I've read up a bit on why the CEL comes on/flash and it says it has something to do with the exhaust system and if continue operating will damage the catalyst converter (which I don't understand since I'm a car dummy.
In addition, the engine vibrates like crazy. I can feel the engine vibrating when I'm inside the car as well.
I already got the car tolled to the dealership and they kinda just told me it might be misfirings and then they said they couldn't locate the problem. So my car basically has to stay there until they open again on Monday and hopefully they will figure out the problem/fix it under the warranty and call me back.
The problem arise late Friday night and I just did a 30K maintenance on Thursday. (but the car already has 43,000 miles on it).
My check engine light has been on for months and the only code coming up is for the VSS. I got the VSS replaced and the light came back on as soon as I hit 70 on the freeway. Checked the code again and the same one came up. Is this a common issue with 06 Accents? I'm wondering if it might be a wiring or computer issue... My ABS light is also on, would this have anything to do with it?
View 5 RepliesI just bought a used 2009 Accent. After a few months, I had it in for an oil change and the mechanic said there was NO air filter even installed in the car. Obviously I know enough that I need one, so I had one put in. Within a few miles of doing that, the check engine light came on. I took it to autozone and it gave error P0172 which appears to be an oxygen sensor. I would really like to know if it's possible the previous owner took the air filter out on purpose because they knew that the check engine light would come on if they put one in.... etc?
View 3 RepliesToday the CEL on my 2010 HB with 30,000km came on and the car ran rough like it had a bad spark plug. I went straight home and luckily had a set on hand and replaced them. Car now runs like before but the CEL is still on.
View 8 RepliesI just bought a Hyundai Accent 08, and the check engine light has been coming on after I put gas in the car, it doesn't run poorly, it only happens after I put gas in the car. and usually after I drive it a while after. Not sure what is going on?
View 10 Replies2007 accent GS check engine light will not come on the instrument panel. Showing a 650 code. What is wrong?
I bought the car a year ago. No check engine light? Could someone have dismantled the light?
I did a spirited sprint from a stop light and then got this cel. It says it's for the second 02 sensor. I got home, jacked it up and checked it out. Everything looked, sounded, smelled, ran fine. What should I do?
View 28 RepliesOur second car is a 2007 Accent, 125KM's (70 miles). Today the engine light came on, I drove it very slowly to my indy mechanic and she is not throwing any codes. Engine temp was fine and she just had an oil change.
Engine light turned itself off so I drive it home and on the way it's all good then suddenly .... she dies. She starts again and I get home, i idle in the driveway and she stays on but a little rough as she is sitting at 800RPM, is this right or a little low?
So, I have a 2011 Hyundai Accent. It drives great. Until recently.
My wife noticed that it was cranking a little longer than usual before starting. Then, one day, I noticed it. So, I stopped the car and restarted it to see if it would happen again, and listen more closely. But, all ti did was crank.
I became upset and went in to do some research and make some phone calls. I came back out and voila, it magically worked fine again. Weird, I thought.
A few days later, no incidents. We go to the grocery store. On our way out, it cranks longer. This time I'm not going to restart it, I think. So, I start driving and everything is great. Except...it suddenly wasn't accelerating. It felt like it was in neutral for like 100 feet or so, then back to normal. We're making plans to take it into the shop at this point.
The next day, we go out to get coffee. Car drives great. On our way out, no problems. We stop at the red light, and it stalls. I have to push it into a parking lot and call the tow. Strangely enough, it starts again ten minutes later, and runs fine.
The stalling and being unable to start for tenish minutes phenomenon has happened three times.
We took it to the shop, it actually did this as I was filling up gas--stalled. I pushed it into a space and waited a few minutes, bam, it started up fine. The mechanic told me that the engine light had been reset. He couldn't figure it out. Said everything looked great.
So, the run down is this:
-My car stalls when idling, but only after it has been driven some, stopped, and restarted without a lot of time passing--like when you're coming home from the store or something, after it sits for 30 or 40 minutes.
-Once stalled, it will not restart again until a few minutes have passed --something like five to ten minutes.
-There is no check engine light. Fluid levels are good. Connections and whatnot, according to the mechanic, looked good.
-When it stalls, all the electronics stay on and work. The oil light and engine light pop up (like this key is in and turned part way), then it all goes away when the car restarts.
-the computer says that it was reset after it does this.
I have an accent 2003 1.6 dohc crank but not start !!! Who do not fire and no gas ... and the check engine light is off when I turn the key on... (I test the check engine light and it is not burn).
I change the engine control relay and this is not work... I have all the wiring diagram and I check wire by wire and I don't find anything...
It happened randomly on the way home from work, the car chugged along with the check engine light flashing at me and then staying on. I was able to limp it home and got a ride to the nearest auto parts store to get some new plugs. I went with the NGK brand. Well, $60 later (including tools on the spot) and it's still running rough.
I know best case it to try and limp it to the autoparts store to let them try and pull the codes. I noticed an old thread where updates were made to the software to correct a running issue. I will note this same chugging randomly happened at 50,000 miles. I shut the car off, let it sit for a moment, restarted and it ran just fine. The engine vibrates noticeably just like it did at 50,000.
2009 Accent running rough 73,000 miles....