Accent MC (2006-11) :: 2009 Won't Start And Making Machine Gun Noise
Jul 30, 2012
I have a 2009 Accent 4-door sedan.
I was told during an oil change in the spring that I would need a new battery soonish. I haven't bought one yet.
Last week I tried to start my car and it made a machine gun noise and wouldn't start. A friend jumped it and it started fine. I took it to Canadian Tire and a mechanic tested the battery and said it was over charged, 508 I think, should be 500.
Then today it won't start and is making the machine gun noise again. Now the horn and lights are dimming too when I lock it.
What is going on? I checked the posts; they are clean and tight.
View 4 Replies
Advertisement
I own hyundai 2000, 1.5L. About 5 days ago the engine started making strange noise that sounds like sewing machine.
I went to my garage and they said that its the hydraulic valve lifters and that I should replace all of them(12 total).
My question is, what can happened if I wont replace them? can I postpone the replacing for a few months or it can cause damage?
By the way, I heard that the noise from hydraulic valve lifters can start due to bad oil, I had 20W50 so I changed today the oil to 15W40(manufacturer recommendation) and the oil filter and still got the noises.
View 7 Replies
This car has been sitting in my car porch for a little over two months. I would start it once every 1 or 2 weeks and let it run for a minute. I assume the battery was not at the best of it shape since every time I started the car, it would take a little more time, but the car would end up starting just fine. After a two weeks break, the power was down and nothing would turn on at all. I jump started the Camry with cables connected to my own car and thought I would start the Camry and take it for a ride, make sure the battery gets a chance to recharge.
But nothing happened when I turn the key, nothing but this "machine gun"-like noise ( which you can hear on the video [URL] .... don't know if by starting the car without driving it for two month, I did not give a chance to the car to recharge the battery, which led to the total loss of power, but this does not explain why when jump started, the engine won't turn on, and does not explain this sound I hear...
View 13 Replies
We have a 2010 Hyundai Accent, with low miles (10,000), and the A/C Compressor is making a "growling" noise. The only way to explain the noise is when you hear a human try to immiate the sound of a dog growling. That's exactly what it sounds like.
First thing in the morning it doesn't make the noise to much, but as you drive for a bit you will start to hear it. Sometimes it's really loud, sometimes quieter. When you shut the A/C off, it will continue for a few seconds then stop.
The service department told me it was the compressor and it is, "pretty normal on the cars." How is that normal though? It sounds awful.
View 9 Replies
So 2 months after my accident I'm finally able to drive again and my car is 100% fixed and ready. Only 1 problem, every time I make a left turn my car makes this weird noise but I don't know what it is. I replaced my suspension and I thought it would take a couple days for the tightness to wear down and for the noise to go away, but of course with my luck it's still doing it. What can it be??
View 5 Replies
My right rear brake is making a grinding noise when the brakes are applied. I took the drum off a couple weeks ago and the shoes are just a bit worn. Just getting into the numbers printed on the side of the shoe material.
I could not see any thing that would be making the metal on metal sound. Are there any wear indicators on the OEM shoes?
View 9 Replies
My brake pedal is making a creaking noise when depressed and can also be heard when letting off the pedal. The noise is not coming from the brakes themselves (front/back are like new) but the pedal area or somewhere behind it. This noise doesn't start until I've driven the car for a little while. The brakes work fine for the most part but sometimes feel a bit spongy if making a sudden or hard stop. The fluid levels are fine.
I'm taking it in on Friday and hoping that the brakes just need to be bled a little or maybe the pedal just needs lube, but I'm worried it might be the booster or master cylinder---if it is one of these?
View 4 Replies
Is it possible for the brakes to make some kind of noise when it's cold outside?
I've been noticing some kind of noise after a cold start, I'd drive the car a little bit then apply the brakes and it would just make this random noise coming from the front-right side of the car. It sounds like a grinding noise, but I can't really tell. It doesn't create an issue either, I'll let go of the steering wheel and the car doesn't drift in any direction at all, the noise appears but the car is slowing down properly.
The noise disappears though after the 1st time it happens, and would only reappear after you've turned the car off, parked it where it's cold and it would only appear after not using it for at least 2 hours. My dad already took it to the dealership and they said the brakes are perfectly fine.
View 14 Replies
After getting to about 1/4 tank, I fuel up and fill the tank but when I try to start the car, it cranks for a while and then finally starts. It will idle really low so I have to rev it until the engine starts getting gas at a steady pace.
View 9 Replies
The wife's accent started hesitating when turning over to start. Like turn the key, engine will turn 1/4 turn, then nothing for a second or 2 ( without releasing the key) and then crank and start fine.
Checked connections at the battery, cleaned 'em. No CEL on.
I had a ignition cylinder freeze last winter, when my wife dropped her key in the snow and put it in with water on it. Had to heat the cylinder with a small lighter-style blowtorch and put low temp graphite in there.
Did I maybe melt something in there?? Something else??
View 2 Replies
So I've been trying to get rid of the check engine light recently so I can get the car inspected. The car has about 130,000 miles. I was having problems with the car intermittently misfiring, and burning a lot of oil on start up. Also the car still had the original timing belt up until this time so I decided to change the valve seals and timing belt. I couldn't get the timing right so I took it to a mechanic and he got the car running like it was before I took it apart, although I don't think he changed the timing between the camshafts. The check engine light stayed on with p0016 as the code. The car accelerated poorly, but otherwise drove fine. I tried changing the camshaft sensor, and cleaning the OCV but that didn't work. So today I looked at the timing between the two camshafts and moved the intake cam over by one tooth which got rid of the p0016 code! Unfortunately the car decided to replace that with the p0340 code. I didn't notice any damage to the pins on the sensor. It seems to stumble for a bit after start, and when releasing the gas after revving the engine, but otherwise idles okay. I have yet to road test it.
View 4 Replies
On my 09 accent, it's been cranking slow/taking longer to start. Occasionally it won't even have the guts to spin the starter (clicking solenoid noise).
I checked the battery (<1 year old), and it has a resting voltage of 16.2 (?!) When running, it jumps to 17.4. Is this a bad alternator?
View 48 Replies
Yesterday my car had a rough start (lasted all of 5 seconds) and it threw the check engine light on. Now other symptoms. It was a rough start, almost like a misfire then it idle fined, and drove my 60 mi commute home without issue. I had fine acceleration, gas mileage idle etc.
I got home and turned it off for 10 min and it then started normally and ran fine again. I'm thinking it was just a random miss that threw on the light, but I'll take it to Advance to get the code later today.
I replaced the plugs about a year ago with cheap-o plugs so it may be time for a replacement again. I thought maybe an o2 sensor but there wasn't a drop in mpg, at least anything noticeable.
And its been a few days since I've gotten gas so I'm doubting just a gas cap issue... The CEL did NOT flash, only solid the whole time.
View 8 Replies
So I purchased a 2009 Accent hatchback about 11 months ago and so far its been great. However, recently (as in the past 2 weeks or so) I have begun noticing a strange cyclic noise developing from the engine compartment accompanied with some minor vibrations. Over time it has grown more prominent. I would rather deal with this before it becomes worse (and more costly) if its a serious issue.
Some info: I recently took a trip to North Carolina (from Florida). I also recently replaced the spark plugs before I left, so they are relatively new. The car has about 37k miles. After popping the hood and taking a look, it seems as though the noise is coming from the power steering pump/pulley area. The noise seems to match the rotations. Either way, here's a video of the noise (pardon the moving in the video, I was mainly recording for sound): [URL] ....
It may sound like normal engine operation, but it did not make that cyclic sound for the first 10 months, so it worries me. Perhaps I'm just paranoid.
View 4 Replies
Car died while driving home. Now it wont start. The tow truck driver that towed me home swears that the timing belt is out. Car makes spinning noise when I try to start it. I plugged in my code reader and got P0342 Camshaft Position Sensor Circuit Low Input. Not sure where to go from here. Do I replace the sensor or take it in to have the timing belt done? 109,000 miles.
View 7 Replies
i have a 2006 f-150 xlt, i was driving it today and it started making a 5x5 beeping noise shortly after i started it up. I read on a few forums that that beeping is a warning about the passenger airbag sensor or something. anyways it went away and kept driving for 5 minutes or so when suddenly the dash went out and all the gauges dropped but i was still able to drive fine. A minute later the engine just died and i managed to pull over to the side of the road. now nothing works when i turn the key, not even a light, its just a dead weight, the remote locking doesn't even work. the only sign of life is a LED from my phone charger that is plugged into the outlet. the battery is only 2 months old so its not that.
View 2 Replies
Before I start, when I drive, and after I shut down (for 10 minutes) my 06 sounds like a machine gun is firing in the far distance, also a buzzing noise is happening. This continues when I drive the car as well. It drives me nuts!! See video for better representation of what I am talking about. Maybe it's the pump for the coolant pre tank but I don't see how this could be normal. This is my first prius, other than this noise the car is excellent.
View 8 Replies
My engine has been making a ticking sound when it starts and when i hit the gas the ticking sounds stays there but go faster depending on my rpms and before it would go away after the engine got warm but now its here to stay. What it could it i feel like sound is hitting against the acceleration cable.
View 14 Replies
My truck has this rapid machine gun type start, but not always. It always starts though. I had the alternator tested at O'Reilly auto. They said it was good. I have also been trying to see if there is a possible relation with my clicking sound. I guess it might be more of a steady tapping. I thought it was possibly a lifter. My neighbor that works at one of the quickie lubes said he would take a look. He listened with a screw driver and said he did not here the clicking/tapping sound from the engine.
I showed him how when you accelerate on the gas it gets faster and louder. He said it sounded like it was coming from one of the pulleys. There is no kind of squeaking though, just a loud obnoxious tapping noise. He said that he thought it could be a bearing.I am just trying to think if there is still some kind of alternator relation, because also at times going down the road I notice that the lights on my dash flicker a bit. From looking at all of the pulleys, they all look pretty steady. Although, the crankshaft pulley on the bottom does look like it has just a little wobble. We did not have a long enough screwdriver to listen for the tapping in the pulleys. Also, the serpentine belt is good on it.
View 15 Replies
I spoke to a mechanic and he is confident that there is no damage since it is not making any noise after oil is added. He is saying that the lifters would have made the noise and now that oil is added, everything is okay.
It is a 2006 Hyundai Accent.
View 19 Replies
My manual transmission has been making some funky ringing type sounds when cold. Pretty sure it's the trans since pressing the clutch in stops it. It always happens around 2k and is worst when engine breaking. When I just start the car there is a very very faint ringing that goes away as soon as I press the clutch even a tiny bit.
The car has about 45k miles and the clutch itself feels strong and shifting is absolutely fine, I changed the oil to Redline the past summer. Maybe throw out bearing?
View 19 Replies
