I'm having an issue with my 08 Accent GS. It is very difficult to start, but only after fueling. Any other time, the car starts without any problems. I have tried to simulate the issue at home by taking off the gas cap and replacing it, but it didn't have the same result.
View 8 RepliesProbably 20k ago the check engine light came on and was related to the "purge" valve as best I can recall, every mechanic I took it to kind of blew it off as just an emissions thing and not really necessary to fix. so whatever just let the light stay on as the car ran identical to before the light came on.
Fast forward to a few weeks ago and my wife was filling up between classes and after she was done and went to start it, it would turn over but wouldn't start completely, luckily a guy there pump the gas and revving it out as he turned it over. then it ran perfectly fine afterwards, started up perfectly after every time....until we got gas again.
Took it to a local guy a few people I know used, told him about the check engine light and maybe the purge valve thing had finally gotten bad enough to need replacing (this was my guess after some internet digging for the same issue), he troubleshooted and came to the decision to replace the front o2 sensor. Ok I said, your the mechanic not me, do it. did it and next time got gas....same thing.
he had it for another 2 days and "couldn't figure it out", refunded me completely for the o2 sensor & labor, while throwing in the towel today. Next up , Hyundai dealership I suppose. Car is throwing NO CODES whatsoever now, have put several hundred miles on since new o2 sensor.
While he had it he had to replace the master brake cylinder. So that's new as well. I've had to replace all the coils already between 75-85k they started acting up one by one so I said screw it and did them all.
OH and another problem is the airbag light has been on the dash for about the last 6-9 months as well.
The car has just over 111k on it and I've about had it, bullshit problem after another and another. What's next??! I've owned probably 7-9 cars in my life and nothing has given me the aggravation of this car.
Cliffs:
1) car won't start when putting in gas
2) starts if you rev it up for a short while, then will start every time afterwards til next fuel up.
3) o2 sensor is new
4) no more check engine light, no codes, yet still have issue
5) car is starting to wear down my patience with repairs
6) if not a cheap fix, bye bye Hyundai
The car doesn't struggle to start at any other time just when fueling. I have a 2011 Accent and I am looking for the locations of the various components involved so I can test them to see where the problem is.
I know the purge valve is mounted on the rear of the intake manifold below the air hose. Now is the solenoid and the valve the same part? I see various diagrams pointing to the valve and labeling it solenoid. The other part is the EVAP canister. I know it's some place near the gas tank but not sure where and I can't find any diagrams online.
I am comfortable with minor repairs. I've replaced spark plugs and ignition coils and a purge valve before so would this repair be something I could do myself or would I be better off taking it to the dealership?
After getting to about 1/4 tank, I fuel up and fill the tank but when I try to start the car, it cranks for a while and then finally starts. It will idle really low so I have to rev it until the engine starts getting gas at a steady pace.
View 9 RepliesSymptoms:
- Check engine light: misfire on all cylinders, and "lean fuel trim at part throttle".
Started with changing leads and plugs without improvement. Then I found the tank ventilation seemed to be clogged, as there was a massive vacuum when opening the filler cap. Checked the canister and replaced a couple of corroded lines. Also used compressed air to blow through the canister and lines up to the Evap-purge valve. Seemed to be OK afterwards (no vacuum), but still misfires.
Changed the Mass Air flow sensor, and it seems the misfires got better, but instead I have some other issues:
- Hard to start when cold. Starts up fine for a second then sounds like it's getting to much fuel and dies. Possible to keep it running if pumping the pedal or holding it at higher revs.
- Rough idle when warm. (Same as before I changed the MAF and plugs/ leads.)
- Drives and runs ok when out on the road.
- Pulled the cable to the Idle Control Valve without any change in idle...?
- Got flashing engine light and "misfire cylinder 4" when giving full throttle on low revs and seond gear up a steep climb.
What could cause this?
- Temperature sensor?
- O2-sensor?
- Idle control valve?
- Coilpack?
My 2008 Accent has a manual trans and 4-Cyl, 1.6L. It had some bad fuel 4 weeks ago, and filled the tank with 97 to clean it back up.
I was driving and came to a stop sign - the server stopped and wouldn't start up again. I was worried about the fuel pump, and ended up replacing the whole thing (under the passenger seat).
I have tested the following:
- When cranked, the bottom of the spark plugs are wet (so gas is getting to the plugs)
- When plugs are pulled out, they spark against the block (so spark should be getting to the cylinder).
The car still doesn't start, and the cranking sounds 'off'. I can't exactly describe what's wrong, but I've had it for six years and it doesn't sound right.
Car died while driving home. Now it wont start. The tow truck driver that towed me home swears that the timing belt is out. Car makes spinning noise when I try to start it. I plugged in my code reader and got P0342 Camshaft Position Sensor Circuit Low Input. Not sure where to go from here. Do I replace the sensor or take it in to have the timing belt done? 109,000 miles.
View 7 RepliesI have an 08 accent gls hatch that stalled the other day and wont start. Replaced the crank and cam sensors as well as the map and purge valve. Now it sputters and stalls with the fuel pump jumped. Has spark ans well as fuel at rail. What am i missing- no engine codes...
View 8 RepliesMy accent won't start anymore. When I turn the key, I hear a series of clicks, but the car won't start. When I put the key in the ignition, lights/radio/wipers all work fine. It's a 2008 manual car.
View 3 RepliesWhen idling and when first start to accelerate it feels like my car is hiccuping. I don't know what the issue is. I do know When i first bought The car about 8 months ago the oils Got wet when The dealer power washed he engine.
View 4 RepliesThe timing belt broke in my gf's '08 accent recently and I decided to have a crack at replacing the belt after getting a quote for $900 from the nearest mechanic (with no guarantee it would fix the problem).
When re-aligning the cam and crank to TDC, I wasn't sure if it mattered which revolution the crank was on (ie. 1st or 2nd revolution) when putting everything back together. I tested rotating the engine with the new belt on slowly to make sure there was no contact and everything seemed ok.
So basically now everything is back together, tried starting it up and it won't start and now i'm wondering if it would make a difference or not if the crank was rotated 1 additional revolution. Otherwise there is more significant damage.
My '05 Sante Fe 2.7 doesn't want to start after fueling up. I have to hold the accelerator pedal down, like we used to on the old rods when we flooded the engine, to get it to start. I replaced the gas cap thinking that was the issue, but didn't fix it. I get no check engine light and with 340k miles, it sent out several codes a while back at the dealer. Could it be the fuel filter or pump?
View 2 RepliesWell my car is listed above it has 99 k on it now.. For the last few months the check engine light had been coming on and off.. It usually happened after I put gas so I figured it was the gas cap... Till yesterday I had it scanned at auto zone and gave me the code listed above... Don't know how to go about it.. I've searched some and found that it could be a cam sensor of some sort or a follower ( spelling) ... Is it a easy fix .. Like I said light goes off and on.. Doesn't stay on always.
View 13 RepliesI have a 2007 Suzuki XL7. About a year ago it started having trouble starting after fueling. Every time you put fuel in the vehicle it would take a few times before it would start. We've had it to several mechanics. They replaced the gas cap and did a few other small things. Nothing worked. We took it to have it diagnosed on the computer 3 different times (twice by the dealer). They only tell us that there is something with the timing sync code. The vehicle now has 190,000 miles on it.
Recently, it's started to act up more often. As the car warms up and is used more throughout the day it becomes more and more difficult to start. It has also had a few instances where you would get it started and you push on the gas and it won't go. This problem is getting increasingly more frustrating. I've talked to my regular mechanic about these issues and his belief is that it is some sort of fuel issue.
Unfortunately, he is more of a backyard mechanic and doesn't have a computer to diagnose it. I recently took it to yet another mechanic and have gotten the runaround by them. The man there told me he would get me an estimate written up with an explanation of what he feels is wrong with it. It's been two weeks since then and I've called a dozen times with no luck. Mechanics are truly frustrating to me. My friend said, call Car Talk, so here I am...desperately hoping you might have a clue as to what is going on with the vehicle.
My 2004 Santa Fe doesn't want to start after fueling. It doesn't matter whether it was just a few dollars worth or a full fill up. After pumping the gas and recapping securely, I have to press and hold the Accelerator to get it to catch. I had the purge control valve replaced a few months ago. And my car started mourn normally for a while. However I'm back to having to push progressively harder on the gas pedal to get it to start after gassing up.
View 5 Replies2007 Santa Fe, hard to start after fueling up, after that one time it cranks fine until I fuel up again.
View 1 RepliesThis is weird, im having problem starting the car just after filling up my tank, this is the third time it happened to me, i have the engine light on, i want to scan it but im unable to cuz my abs module is bad, i drive a 98 passat 1.8T, Just clarified I'm only unable to start the car right after I fill my tank aftert that the car starts with no problem
i always use SUPER, the only way to start it is while turning the key hit the gas pedal making it go brum brum lol. But like i said i only have difficulties starting the car right after fueling after the car starts the car is fine, it starts every morning untill i visit the gas station again...
My car is a 2007 Hyundai Santa Fe GLS and does not want to start only after fueling. It will also die when the fuel cap is removed. There is an excessive amount of vacuum pressure released when cap is removed. The computer showed a code: P0441 Evaporative Emission Control System Incorrect Purge Flow. Is this simply a fuel cap issue or something else?
View 5 RepliesCar is at the stealership right now 74k miles (CPO until 75k). Having issues with cold starts, weather has been getting into the 40's, and when coming out of work in the ramp the car has a very hard time starting (usually taking 3 times to fully turn over). However, in the morning coming out of my heated garage the car starts right up no problems whatsoever.
There are zero codes being thrown, zero lights on the dash. Brought the car in for diagnosis and the dealer has had it now for 2 days - still "unsure of the issue" but they have proposed that it is either a fuel pump (covered by CPO) or Carbon-Build up.
My son has a 2008 Ranger 4.0 4wd 5 speed. Every month or so we need to bleed the clutch as the transmission becomes very difficult to shift. It does not lose fluid, but seems to be holding air. And it's not easy to bleed this setup. Slave going bad? I guess the transmission will need to come out then.
View 3 RepliesI have 22000 miles and this never happened on the car before wonder if it has anything to do with the recall, had the fuel system recall done about 200 miles ago. Other day after fueling car wouldn't start, also new "feature" to this car. Hope the recall didn't do something bad, I tried to reset it by reseating the cap, but warning comes on as soon as I drive it.
View 4 Replies