Accent LC (2000-05) :: Door Chime / Interior Lights Not Working
Apr 11, 2013
I have a 2003 accent and i no longer have interior lights or a door chime working..
I did have a electrician friend change out my hatch last week and pretty sure he shorted out the fuse. I can't seem to see what fuse it would be all seem good
From me checking around i am lead to belive the it could be (shunt connector, memory fuse, power connector, joint connector m31) multiple names for the same thing.
How would i check this? How is it removed?
View 11 Replies
Advertisement
So yesterday we removed the radio from the car to install an after market one, after realising the after market radio had different cable inputs we reinstalled the original radio that was in there. But now the radio won't turn on, the clock doesn't work and the interior light isn't working. What the issue could be?
View 2 Replies
just notice my interior door lights of driver rear and passenger front aren't working well . Driver front and passenger rear is working.
View 4 Replies
Two nights ago I got into the truck at night and realized the interior lights don't come on. I tried the rocker switch it will only dim the dash gauges now. It did work before guessing its a bad rocker switch. I can turn them on manually front and back....
View 5 Replies
I have a 2000 EX 7.3L ... The power windows aren't working and neither is the interior lights. I am hoping it is a couple of fuses. Problem is that I can't find a fuse diagram and I don't have any knowledge about changing the fuses. Do I need to change them both under the hood and under the dash? Which fuses I need to look at changing?
View 5 Replies
I have a 2000 E150 (Glavel Conversion) van and the interior lights do not illuminate when the doors are opened, although they used to. They also no longer turn on from the headlight dimmer switch. They will turn on individually if the manual switch at each light is pressed while the engine is running, so the bulbs and wiring appear to be working. I replaced the headlight switch with no noticeable effect. Is there a timing circuit that switches these on for a short period of time to allow illuminated entry that could have failed? If so, where would I find the module and how would I test? Relays and fuses look good.
View 1 Replies
I've been having a few problems with my 2000 hyundai accent recently. The biggest is the dashboard lights aren't working not the best thing if you have night classes. How I can make those lights come back?
View 17 Replies
About 4 months ago I was at the gas station and when I tried opening my fuel door, the switch wasn't working. I went home, took the door trim off, and then removed the switch in order to clean it. Once I cleaned it, it worked but about every 3rd time that I clicked it. However, yesterday it finally gave out as I was at the gas station. So I came home and now I'm stuck because I don't want to break the fuel door.
I ran through the fuses in the fuse box but on the diagram none seem to be for the fuel door. The weird thing is that yesterday as the fuel door switch gave out, so did the interior door lock switch. Now I have to insert the key from the outside in order to enter the car. But the key cannot unlock the passenger door.
When I hit the interior door lock switch, I hear a click noise under the dash. I took a look under there and it seems to be a bunch of relays. It's very tough to tell which one is the one clicking.
View 2 Replies
I own a 2001 Hyundai Accent. For some reason my front fogs lights have stopped working, i am suspecting the switch is dead because the green led does not come on when the switch is depressed, i have checked the fuse and all ok however on the fuse box/relay cover in the engine bay it says that there should be a relay (see attachment) but i don't have a relay there and never have had even when the lights worked, well at least i have never taken it out. Back to the switch, how to remove the switch from the panel so i can test the circuit with one of the other switches.
View 13 Replies
Troubleshooting a problem with friend's 2000 F250. His power windows aren't working and are causing problems with his door locks and interior lights. When he tries to use his drivers side power window, his power door locks quit working. If he puts the switch to raise, the interior lights flash. From what I've read, it sounds like the GEM to me, we've inspected the wiring and it all looks good. I pulled it out today and it looks good inside, no sign of water leaks on it. If it is the gem, how much do they cost and do they require programming?
View 5 Replies
My 2007 ES 350 will chime if the car is on and the door is opened. It will also warn you if the car is on and the electronic key becomes out of range.
One day both of these features stopped working. Everything else seems to be working just fine.
View 1 Replies
So all about the same time as far as I can tell, some electrical type issues cropped up.
This Always happens
The Horn is now making a lower pitch wimpy sound
These Next two, when they happen, seem to happen at the same time:
The 'Hey you left your Lights' on Chime does not always Ding
The Drivers Side Rear passenger Door Lock does not lock/unlock
Since they happen intermittently it would not seem like a fuse issue, more like a relay or loose connector?
View 1 Replies
I'm trying to get an F150/1997 started that's been sitting for about 2 years. After installing the battery, turning the key, nothing happens. No click, no turnover, nothing. The dash lights come on along with open door chime.
What to check first or troubleshoot this? The vehicle was running fine when parked, battery removed. I was thinking the brake pedal switch might be corroded, or maybe someone unplugged something under the hood or tampered with something.
View 7 Replies
My 97 f250 light duty has give me fits. The power windows do not work up or down either side, no door chime or pdl either.i think this is related to the gem module cause I have run a 12 v to the motor itself in the door and it goes up and down.checked all fuses and switched relays.I don't even hear any clicking relays.I have spliced into the orang/white wire at the 2pin connector to the motor and have hooked it to a purple wire on the back of the window switch and now have pdl,and door chime,and hear clicking under dash but still no windows.What am I missing is there another wire to splice into?
View 1 Replies
I'm having a problem with my interior dome light and my door chime bell not working in my '01 F-250. I found that the bulb was blown,so I replaced it thinking it might fix the door chime bell also, thinking they were wired together from the factory.
The new bulb didn't fix the problem. I recall that when I noticed the door bell didn't ding-ding anymore was about the time(when it got dark), that I noticed the dome light was out also.
What I may check? The fuses all work, the interior dome relay switch works and I see nothing else in the owners manual to look for as far as dome lighting and door bell chime.
View 4 Replies
I have a 2000 Excursion 7.3 and having problems right now because my Door Chime and Dome light dont work when the doors are open. But for some odd reason, when the rear door is open, the dome lights work. The 4 doors doesnt work yet the rear door does
The reason i want this is because i want to install an alarm and the door signal is needed and it is suppose to be tapped at the dome/chime so when the door is opened, the alarm will sound so it is not just relying on the Shock sensor.
View 4 Replies
I have a 2010 Accent GS. I was trying to change the bulb in the trunk light. I changed the bulb and now none of the lights inside the car work-- map lights, dome light, trunk light. I figured it was a blown fuse. I looked at the fuse box inside the car and I think I found the fuse I think it's the one in that yellow box that is in the right side center of the fuse box. How do you pull that thing out? Are you supposed to pull out the individual fuses. I pulled the yellow box. It only comes half-way out. How do I check that little 10 amp fuse inside that yellow box?
View 3 Replies
Accent 2012. I replaced the trunk and map lights with LEDs and they worked okay. I did the dome light last and something caused the interior lights to not come on. The light switch is set to door for the dome and middle position for the map lights. I am pretty sure I have the LED dome light polarity correct because it did come on for a bit while I was seating it.
Now the map and dome lights don't come on. I checked the 'ROOM LP 1' fuse and it looked good but I replaced it with one of the spare 10A fuses anyway. Still not working. The trunk LED does still light.
I searched this site and found in the 2007-2012 santa fe forum under 'front dome light not working when doors open' which mentions a blown diode in the dome light housing causing a similar issue.
View 12 Replies
I have a 2006 Accent and recently the interior lights have gone dim and the switch to adjust them does not make them brighter nor dimmer, why this has happened? I don't usually have it on the brightest but not the lowest either and now it seems to stay on the lowest setting.
View 2 Replies
My interior lights won't come on when I open the doors.
View 3 Replies
Car is a UK 2004 W12.
I've tried everything I can think of or find to get them working but the interior lights won't come on automatically. They work if I turn them on manually, or once I'm in if I press the 'door open' button on the lights they will work when the doors are open.
But surely they should come on when the car is unlocked like every other car? It's getting quite annoying getting into a car in total darkness!
View 5 Replies
