Accent LC (2000-05) :: Cold Weather Start / Turns Over Fine Just Not Firing
Nov 30, 2014
So my wife drove her car all day yesterday, everything fine. This morning went to start and it wouldn't. It turns over fine just not firing.
Now during the summer I had replace the fuel pump/filter before discovering that was not the issue.
I know you are already thinking CPS!.. I replaced that over the summer.
I have not checked the spark yet, kinda hard to do that one by yourself.
Beyond spark I am not sure what else could be wrong, especially because it was running fine last night. Is it common for accents to have issues in 20 degree weather?
View 3 Replies
Advertisement
Vehicle: 1995 960 wagon
Background: Exhibits intermittent no-start behavior in both warm and cold weather, wet and dry weather, having sat overnight, or only sitting a few minutes. Turns over fine, but won't start. Sunday, it started fine several times, went to Home Depot, wouldn't start. Called a friend to pick me up. When he was almost there, I tried it again and it started back fine. Been in shop a few times, they played around with a few electrical connections, battery cables and grounds to injectors. Also replaced fuel pump. I have not verified if it is a fuel or spark problem, I just bought a FI fuel pressure gauge last night.
Once started, it does fine. It never stalls or cuts out. That is why I am leaning toward a CPS (that's what jeep people call it.) Sometimes, under the slow cranking speed (relative to idle) the signal is too weak to be useful. However, during idle and normal operation, the flywheel is moving fast enough that the signal is much stronger (being a magnetic pickup). Thus, the reason it only happens during starting, not during running.
Here's my current working theory: Bad crank position sensor (is that Volvo people call it?)
This is the only part I can think of that would cause this. A fuel pump problem would probably show up during running. I think the pump also receives a signal from the cam sensor, so if that sensor were the problem, it would happen during running too, not just starting. It the cam sensor an optical sensor? Shouldn't cause it to not start, although it might cause a difficult start.
View 19 Replies
I have a 2000 Hyundai Accent hatchback with 98k miles. About a month ago we were headed out of town and got gas about a mile away from the house. After filling up, the car wouldn't start. It would crank but not fire. Tried for about 15mins to no avail. Had it towed to local mechanic and it started right away. They kept it for the weekend and said they had no problems starting it, so without experiencing the problem they said they would just be throwing parts at it.
About 2 weeks after my wife drove to store and when she went to leave and same experience, but this time it started after trying for a couple of mins. Then just this Tuesday it wouldn't start in the morning. When it just cranks but not fire it shows a pending P0335 (crankshaft position sensor). So I ordered the part (won't arrive til Friday). When I got home I tried to start it as well to no avail; tried again Wednesday morning and evening, nothing. Then this morning (Thursday) it starts right up. Once its started it runs great. After recurrence of no start 2 weeks ago, I replaced spark plugs and spark plug wires.
View 6 Replies
A friend of mine has had this 2000 Sierra since new. It has just over 100K and never had any cooling issues before. Last week when it was about 10 below zero she drove it home and it overheated and pumped a couple quarts of antifreeze overboard.
She refilled it the next day and it was fine but got it looked at by a local independent mechanic. I had told her that it was likely a sticky thermostat and it ought to be changed out anyways due to its age. The mechanic thought I was wrong and that she had driven it off to quickly in the super cold weather.
View 2 Replies
I recently caught up on some maintenance with my truck, changed the turbo pedestal seals, replaced both batteries, brakes, e-brake cable etc and installed new 10k hid headlights. its a single cab 250 with a 7.3 and zf6 4x4 with 133k. a couple days ago I turned on the headlights and the truck died, restarted no problem and would die the next 5 times I tried to turn them on, then it worked fine. yesterday I got in my truck to leave for work and got no wait to start light, no glow plug chatter, no fuel pump running. turns over just fine but no fire.
I got a ride to work and tried it when I got home, fired right up. I pulled the pCM, checked it out, no weird smells and my TS chip wasn't corroded or anything like that, worked fine. drove to 711 to get a 6 pack and it did the headlight thing again. I removed the HIDs because this all started after I installed them and reinstalled my silvanias and it didn't die when I turned them on. this morning went to leave for work, same no start condition. I disconnected both batteries for 30 seconds to reset anything and same problem. I was about ready to light it on fire this morning.
View 1 Replies
Title pretty much says it. When its COLD it surges while idling upon start up. It goes away once you start driving it and the engine warms up. Other than that it runs great. Its got about 235 K with a replacement motor that has about 100k. I've had it about a year. Great vehicle. Its a standard.
View 2 Replies
I am writing this about my fiances 2000 Oldsmobile Alero 3.4 liter. I live in MN so we see our fair share of cold weather. After her car has sat over night it will not start in the morning when the temp is below 32F or so. It started happening at the end of last winter and then it got warmer out and the car became normal...which is hard to figure out the issue when you cant verify the problem when you want to. Anyways we just had one of our first pretty cold nights and we went out to start her car and it barely started.
I have suspected it to be a fuel issue because while trying to start it if I hold the gas pedal in it will start to backfire lately and just acts like it is flooded. This last summer I looked over some things and found that the Fuel Pressure Regulator was leaking into the vacuum line which would go into the intake manifold and flood the car. So I replaced that convinced that it would solve the issue. It didn't. I also found that the PCV valve was stuck so I replaced that. Last winter I dumped in a bottle of gasoline de-icer or whatever that stuff is called thinking maybe she got some bad gas and her lines were freezing. That didnt change anything.
When the car wont start I can literally crank until the battery is dead (newer battery in the car) with no luck. I have had to be jumping it and cranking it over for a good hour to get it to start. Not cranking straight time obviously. But about an hour worth of time before it starts. And at that time i am thinking it starts just because of the air temp going up in that amount of time or something... I don't know. I am not quite ready to bring the car into the shop because I know it will need to stay there for a few days to be able to get the right conditions for them to verify the problem. My fiance and me have very busy schedules between both working full time and going to school full time. So to be without a car for a few times isn't an option.
View 6 Replies
My 2001 Accent GS (1.6L DOHC) wouldn't restart after a short 2 mile trip to a local store. The engine cranks fine but doesn't fire.
It has had a CEL issue for awhile and after it wouldn't start I checked the codes and got:
303
335
722
I replaced the Crank Position Sensor and Fuel Filter but it still just turns over.
I hear the fuel pump run when I turn the key on and I broke the fuel line and it is Pressurized, so I doubt it is a fuel issue.
The 722 code indicates the output speed sensor has an issue. Need to know definitively if that sensor is completely shot could this prevent the ECU from firing the engine?
I have had this car since it was brand new and I'd like to keep it going a little longer.
View 5 Replies
2000 Sierra 1500, 5.3L engine. When he starts it in the cold (below 40 degrees) at first hits 1000rpm, then immediately drops to 400-500rpm. The idle is rough and wants to die if he tries to drive it. However after 10-15 minutes and the eng warms up, its fine no problems at all. There is no codes, so the scanner we had didn't tell us anything. He had cleaned the TB and intake system with cleaner, no dice. He also disconnected the IAC while it was idling rough, that didn't change the way it ran at all. We would like to toubleshoot it more before we start throwing parts at it.
View 1 Replies
I Have a 93 bronco with a5.8 the truck will start up and run fine for a while and then the engine gets really ruff starts back firing and shuts off it only starts with starting fluid or after it sits for about 30 mins.
View 7 Replies
I have a 2000 model accent manual trans its just recently clocked 200 000 km I know the car has had problems but they are getting worse. Occasionally I have Problems starting the car in the past but it usually takes no more than 5 turns to get started but this is getting worse the other day it took about 5 min maybe more to get the car started I am guessing my starter motor probably Needs to be changed.
Next problem yesterday after I put a full tank of Premium 98 in the car its starts to rev itself changing the sound and note of the motor running constantly it has done this in the past but not so severely and It only seem to do so after putting petrol Especially when I put fuel From a servo I don't usually go to the car would have stalled more than once but didn't only because I tried to keep the revs up when it sounded like it was gunna die also I am pretty sure my fan was making some weird noises but the car has had no engine Light show and no Overheating.
View 1 Replies
Been having issues the past month with the car taking a couple times to start. It's very sporadic. Sometimes I'll only have this issues once a week. Sometimes once every other day.
Engine cranks it's just not firing. Almost like what would happen if you were out of gas. Sometimes it takes 2-3 times. Just yesterday it took about 5-6 times. Once started though the car seems fine. Drives fine, haven't really noticed any hesitation nor has it died while driving.
1.6 automatic
130,000 miles
no CEL on
new plugs at 100,000 miles
Changed the fuel filter when i noticed it happening and ran some fuel treatment cleaner in it.
We took it into the shop and of course every time they checked it out it started up fine. even left the car there for 2 days and started up fine for them. They said they couldn't really diagnose it as it seems ok to them.
Fuel pump going bad? Fuel pressure regulator going bad? Crankshaft position sensor going bad?
View 5 Replies
BCAA at the tow mentioned that there was no electrical firing when I turned the key, as a result I purchased a new cam shaft sensor and installed today but the problem still persists. I 'm thinking I need to get the other half of the sensor that plugs into its female part, but am uncertain if there are any other potential possibilities to the problem at hand.
View 4 Replies
But it will start later in the day or when the temp is above -15C (5F) the car has a one year old battery, it has synthetic oil. Should we change the spark plugs? the car is 10 year old and they have never been changed.
View 25 Replies
I have a 2003 Silverado 1500 V6 vin code x with 260000 miles, for about a week now in the morning when its damp out or when it has rained the truck won't start, it cranks fine but will not fire. once it sits for a few hours and everything drys up it fires right up with the first turn of the key.
View 3 Replies
My 01 accent's engine makes a clattering sound(sounds a little bit like a diesel engine) when it's first started in the morning. After warming up (in about 20 seconds or so) the sound disappears. My oil level is normal(last oil change about 4k miles ago with full synthetic oil. I normally change oil at 5k intervals with full synthetic), timing belt changed about 1 year(20k miles) ago. Should I be worried?
View 4 Replies
When engine is cold it starts fine, when hot from driving (e.g. the engine's temperature display's needle is in the middle) i cannot start it unless i try 3-4 LONG keys. What can it be? Where should i start?
View 17 Replies
Awful belt noise that erupts during cold starts. I realize that this usually means a replaced belt. I want to know how to go along diagnosing which belt and then how to replace it. Here's the symptoms:
1. Awful belt screech when turned on, goes away within 20 seconds
2. Belt noise comes back when turning the wheel to back out of a right driveway
3. The STEERING WHEEL feels like it has no power steering WHILE the screeching is happening.
4. The headlights (when on) dim for about 3 seconds
5. All these symptoms happen when the temperature is below freezing and it's a cold start.
How is the belt screeching connected to the steering wheel being tough I turn?
View 8 Replies
92 tercel will not start. Replaced plugs, wires, rotor, cap. Turns over ok.
View 2 Replies
This problem has plagued me for a while(since last year). When I start the car in the morning, there's a brief period when the power steering is totally gone. When the car is thoroughly warmed up(after 2 minutes of driving), the power steering is back and there will be no problem. Wondering what could that be. The power steering fluid level is normal.
View 5 Replies
My son's Ranger wouldn't start today, turns over fine, added gas to make sure it wasn't out still no hit.
Other than fuel pump (he said he couldn't hear it) what things should he check? I'll check back in the morning.
1994 Ranger 2.3 4 Speed ....
View 3 Replies
