I drive a 2004 Hyundai Accent, base model. My speedometer isn't working at all. I have tested the speedometer motor in the instrument cluster. I have tried replacing the transmission speed sensors - both input and output. The speedometer still isn't working. What am I missing?
View 9 RepliesThe Speedometer is not working, it always stays on ZERO, and also the mileage are not running, so my car is not accumulating miles.
I already change the Speed Sensor (VSS), and the Transmission Speed Sensor. (Attach Files for References).
What can be wrong? Maybe the Speedometer Instrument Cluster? My car is a Hyundai Accent 2003 Auto Transmission.
On my Accent I'm having problems with the speedometer. Speedometer stopped working with the odometer as well. My temp gauge and gas gauge work fine. Check engine light came on, gave code p0501 which is the speed sensor. Just had Firestone replace it but it didn't fix the problem.
He gave me two conflicting things. He said that when he span the gears at the end of the cable there was nothing going on at the speedometer.
But then he said that the cable wasn't making contact with whatever it needs to in the transmission. So he said it was something in the transmission.
My problem with that is, if it was something in the transmission, shouldn't the speedometer have moved when he span the end of the cable with his hand? What else could it be?
On my way home the speedometer stopped working and the air bag light came on. The odometer is still tracking distance and one other odd thing, the radio volume goes out as soon as the clutch is released. Tried a scanner and there are no codes.
View 5 RepliesI have an 02 GS with automatic transmission. The speedometer quit working and now the transmission does not shift out of 1st while driving. CEL is on but I'm waiting for a friend to come over and get the codes. It shifts into drive and reverse fine but I'm wondering if there is a speed sensor in the speedometer that signals the tranny when to shift?
View 4 RepliesWhen the weather is rainy or just very humid, the speedometer needle in my 2000 Accent jumps all over the place. According to the service dept. at my local dealership it is most likely the speed sensor causing the problem.
View 1 RepliesI got a problem with me partners accent 2003 hatchback, after she filled up with fuel and turned the air-con on the speedo didn't work like it read 0, but while driving and turning the aircon off speedo started working again..... What was wrong or happened? as now it wont do it....it works fine??
View 2 RepliesMy needle is, lets say, vibrating..when I am driving more than 50 kph my speedometer needle is vibrating ,it is dancing up and down.
View 18 RepliesI have a 2000, automatic Grand Am SE with 161,000KM in her and everything seemed to be working fine but as I was driving it today my speedometer just stopped working and when I try to get her up to second gear she kind of jerks forward.
Also, today when I was driving she couldn't gear up at all, she just went from first to second to third to fourth gear without picking up any speed. I'm pretty sure it has something to do with the transmission?
I have a 2000 F350 4x4 with 7.3L diesel and a manual transmission. While driving home yesterday my gauges (fuel, temp, volts, oil pres) stopped working. Within a couple min the speedometer and the tach also stopped working, but the truck was still running fine. Within a couple miles the engine stopped running, just like I had turned the engine off.
After having it towed home I checked all the fuses, none are blown, but there is no power to fuse #16 (15A, instrument cluster, high beam head lamp). Also in the fuse box under the hood, again, no fuses are blown, but fuse #9 (left head lamp low beam) and #11 (right head lamp low beam) have no power to them.
GF recently purchased an 04 accent, 4 door auto, with power windows and locks and one thing that's not working is it's horn. I found the fuse box on the drivers side kick panel, was not able to find a fuse that controls the horn. Is there one that's shared with other units or something else I need to look into ?
View 8 RepliesMy car is a 2004 Accent hatch, 1.6L manual.
I had a no-start on Friday morning, and discovered that the fuel pump had died. I tested it on its own, and it has not coming on. The relay was operational, and I had power at the pump, so I replaced the pump. The pump came on and the car started quickly and sounded perfect for about 3 seconds. Then it began fighting to stay alive, and finally starving out. It is acting very rich, belches some grey smoke, sounds like unburnt fuel is being exhausted. It stalls pretty hard, and the CEL comes on.
I connected my WiFi OBDii scanner and had a bummer of a time getting it to communicate with my iPhone, even though it has in the past. Finally got Dashcommand (app) to tell me: "Failed to read emissions monitor status. OBD-II communication error." After some excessive profanity, I connected an Innova scanner that has also worked on this car in the past. The scanner gets power, but never reads a code. The 'link' light flashes sporadically, and fails to read anything.
It's as if the initial start up phase is peachy, but it won't transition to normal operation. I assumed vacuum leak or purge valve nonsense, but I can't find anything disconnected or obviously amiss. Other than that, the fuel rail pressurizes, and the car will start. Giving throttle works as normal in the first 3 seconds of startup, but when it tries to transition, the throttle responds in a bizarre, delayed manner, and then makes it bog and die quicker than letting it suffocate on its own. Whatever happened took my original fuel pump with it, and it won't communicate via the OBD port at all.
I've been having a few problems with my 2000 hyundai accent recently. The biggest is the dashboard lights aren't working not the best thing if you have night classes. How I can make those lights come back?
View 17 RepliesSo I bought a 2005 accent a while back, and one thing that's been bothering me is the hatch light won't turn on. It's not an issue with the bulb, and I'm not sure how to fix this.
View 2 Replies2001 hyundai accent, HARD TO START. I have to start the car almost 3 times plus hit the gas pedal to get it working. I already replace battery, starter, spark plugs, spark plug wires and air filter.
View 9 RepliesI'm new and just read a thread from 2008 talking about malfunctioning overdrive. My overdrive has stopped working. It was intermittent for a while and now won't come on. A recommendation was made to replace the transmission sensor cable. How do I find/access the sensor cable for my transmission? Is there a website that shows pictures and gives instructions.
View 6 RepliesI just changed the timing belt and everything runs great. I pushed the AC button and no light came on. I checked all the fuses and they are good I took the H and L caps of and tapped the pin and there was air blasting out. Don't know what it could be? All I did was loosen the compressor and remove the belt and put it back on.
View 2 RepliesI have a 2005 accent gls. I use the car for deliveries so a lot of stopping/starting. when the car is hot, the AC compressor will shut off after 5 seconds, and not re-engage until about 20 seconds, then only on for 5, so not keeping cool air. I noticed when I turn the AC on, the condenser fan (i think) kicks into high speed so I assume that's what it should do, but when the issue is happening, it does not go into high speed. the shop I went to wasn't able to determine the problem. they checked pressure and evacuated the system. when it works, it blows cold as it should.
View 3 RepliesSince I purchased my Accent 2-3 years ago my horn hasn't worked properly. When i press in on the steering wheel (with the car off) I can hear a click noise from the engine, indicating to me that the button in the wheel isn't the culprit. So if the button in the wheel is sending a signal, but the horn only works 1 in 50 times, what might be the issue i could try? I already looked at the horn, and seems to be plugged in firmly. Not sure where else to go from here.
View 3 RepliesWent to Advanced Auto to get the battery tested since it takes a few cranks for the engine to start. I thought it was the battery but after testing the battery they think maybe its the starter because the battery and alternator shows that its perfect.
I will also be taking the car to get the timing belt and drive belt replaced and the spark plugs and wires. I just want to know if you all think its the starter or should i check anything else.
So I tried to launch my 04 accent today, but when I threw it into 2nd, all I got was engine revs. 3rd, 4th, 5th and reverse all work fine, but 1st won't work at all, and I can only get 2nd to work if I shift into 1st before hand. My question is what broke?
View 2 Replies