Accent LC (2000-05) :: 2002 Parking Brake Dash Indicator Won't Go Off
Dec 21, 2012
I recently had my '02 Accent serviced. When I picked it up, the mechanic had set the parking brake with about 15,000 lbs of force. Once I got it released, I noticed that the red parking brake dash indicator light won't go off while the car is running.
I have verified the brakes are free, and have tried wiggling the brake handle.
Is there a switch somewhere that could be bad? For the record, I do most minor maintenance myself, and have 214,000 trouble-free miles on my 1.5L SOHC Accent.
View 1 Replies
Advertisement
I have a 2002 Accent...Won't start....When I turn the key on...none of the idiot lights come on...It will turn over like crazy...but nothing....Have checked all fuses and relays... Then all of a sudden the lights will all come on and it starts...ran it for awhile drove it around a bit...shut it off...then tried to restart and it did...ok then 2 days later went to start it..and same thing...No idiot lights came on....and of course will not start..Someone mentioned to me it might be the ignition switch itself that might be causing the problem?
View 3 Replies
The car is a 2002 Accent GL LC ...
Here's my problem, The brake lights will not come on at all.
I've checked all the fuses, they're fine. Same with all the globes. I can't source a wiring diagram anywhere so I just started looking for faults.
I started with the pedal switch. There is no power getting to it at all but it earths fine. I thought the feed from the battery could be severed so I fed 12v straight to it. The switch works, but the lights are still not getting power.
To follow any of the wires in either direction from the switch, it looks like I'll have to remove the dash and that's really something I don't want to attempt without a good reason.
View 2 Replies
I'm having an electrical problem that's resulting in the hazards, dash lights, radio and clock all constantly flashing on and off repeatedly. The car starts fine.
When investigating under the hood, I found a wire (pictures below) that wasn't connected to anything. I'm not sure if this is what's causing the problem, but I figured this was a good place to start.
What this wire is supposed to be attached to, and if it has anything to do with the flashing lights I'm experiencing?
What this wire is or possible causes of these flashing lights.
View 17 Replies
When I depress my brakes the right rear chatters, almost as if metal is on metal. Depending upon my speed when I brake the chattering will rise or fall with the speed I'm braking. Sound familiar?
View 9 Replies
I installed a set of bi-Xenon HIDS identical to these.
in my wife's 2008 Accent. I unplugged the DRL module as shown in a thread I found here, but now there's no high beam indicator on the dash. Is there a wire on the plug that I can put a jumper on or something to make this work again?
And before all the nay-sayers growl at me, instead of assisting with this problem, I aimed the lights really low so there's minimal glare to oncoming traffic. We drove about 125 km last night with them and never got high-beamed once.
View 3 Replies
I have the Prius C which when I bought had 3 lights on the dash - ABS, Brake System light and Slip Indicator light ON. What this may be?
View 7 Replies
I have a hyundai accent 2005 vehicle and there is no Low warning fuel indicator in the vehicle. My entire fuel tank ran dry still there was no low fuel warning light. According to my mechanic there is no low fuel indicator installed in the fuel pump
My VIN number is KMHCG41GR5U633054
View 8 Replies
Today I was informed by a passing motorist that my brake lights had stopped working. Upon checking, they were right. The lights do not come on at all when the brake is pushed, including the center one. When my headlights are on thought, they do light up, just do not brighten when the brakes are hit.
View 16 Replies
I recently purchased an 07 f150 lariat leveled 4x4. I noticed the other day that all at once, the abs light and parking brake light came onto the dash, 4x4 low doesn't work and just stays in high and the ac doesn't blow cold. I'm assuming this is somewhat connected considering this all happened at once but really just not sure.
View 1 Replies
Just bought a 2005 accent yesterday. I new the bulb was gone, when I lifted the bottom noticed that the battery is so close to the lights I can't get my hand down there. Do I need to remove my battery to replace this bulb? Also what is the model # of the bulb?
View 2 Replies
I just installed a stereo in my daughter's 2010 Accent and tapped into the emergency brake wire to disable the DVD option when the emergency brake is engaged. Everything works fine except that the emergency brake light on the dash stays on dimly after releasing the emergency brake.
View 10 Replies
So I washed the car today, and when I was done I had the Parking Brake error. Now the button keeps blinking and the parking brake light on the dash keeps blinking too. I don't think the brake is actually engaged, but I am afraid of pushing the button now in case it locks up in "engaged mode". That way I can't drive to work tomorrow. I know this may just be the button, but driving around with this dinging sound and blinking lights is annoying.
View 8 Replies
The '99 F250 has the parking brake release under the dash, way down low. While I was in the wrecking yard, I noticed many Excursions and Econolines have them on the left, by the parking brake. Whether one of those might work, if I installed it on my '99?
View 3 Replies
4x4 dash indicator light stopped working on my father's 2002 F-350 V10 about 8 years ago and I'm trying to see if I can fix that problem.
Unsure exactly when this problem began, but when a mechanic replaced front wheel hub about 8~9 years ago, automatic hub lock stopped working. Back then, I thought that is why 4x4 indicator stopped working.
When I removed hub to replace ball joint 2 years ago, I discovered yellow O ring was not installed and that was the reason why automatic hub lock stopped working. Now I installed new O ring and vacuum seal, automatic hub lock works. However, 4x4 indicator on the dash still does not work.
I thought may be bulb went out, but when I tested dash bulbs with self test mode, 4x4 indicator light turns on. Also I believe that lamp is LED not regular bulb.
When I pulled DTC, I get P1879 - Powertrain Transmission Transfer Case 2-Wheel Drive Solenoid Circuit Failure. From what I searched this indicates failure at vacuum solenoid for front hub locks, but it is working fine. What is going on?
View 4 Replies
So my 2007 Accent/Hatchback started having this weird issue the other day.
My Parking Brake/Low Brake fluid Level Warning Light will coming on while driving and then all the gauges drop down. The light goes off and the gauges come right back up. All this happens within 2-4 seconds maybe. And usual happens maybe once every 6-7 times I drive it so not all the time.
I am driving, not braking so even more confused.
View 3 Replies
I live in the mountains an back into my driveway that is on a steep hill. My car has rolled backwards twice now with the parking break engaged. The first time it came to a halt where it flattened out. Last night I had my truck parked behind it and it rolled into our recycling and garbage bins and pinned them between the car and the truck. I have a significant dent below the window on my hatch.
Manual transmission. Parking brake engaged. Car was in neutral. I usually leave my car in first when parking on a hill. I am not sure if it slipped out of gear or I left it in neutral by accident.
View 18 Replies
2013 accent auto My car rolls noticeably after parking unless the ground is completely flat. Parking brakes prevents it from rolling but I don't use parking brakes every time. Another brake problem I have is thump or clunk noise I get whenever I release a brake from stop.
View 12 Replies
Two days ago my '03 Silverado stopped recognizing when I pop the parking brake loose and now dings incessantly while I drive and the parking brake light on the dash flashes on and off.
I tried...
1.) Engaging and releasing the parking brake multiple times.
2.) Checked the brake fluid level (perfect level)
3.) Checked my owner's manual (not enough info in the manual)
View 8 Replies
Had my car parked outside of work for about 12 hours yesterday, and in the NYC cold front, the parking break must have stuck on slightly. When I started to move, despite the fact I'd released the parking break, I received a warning in the MFI that said PARKING BREAK FAILURE TO RELEASE. I pulled the handle again and heard it pop just a little more off. Everything worked great after that. If I hadn't received the alert I probably would have driven off with it on. I'd probably have noticed the hesitation and checked the break again, but the alert was useful. Some of the warnings in the MFI can appear to be a pain at times, but it's amazing how thorough a job VW has done monitoring the cars systems and giving real time information if something doesn't work. You just have to make sure you don't get info overload from it all!!
View 4 Replies
So I have been reading through older posts on this and never found a good solution so now I am asking again. My parking brake on my 02 Yukon is bad. I push it and it goes to the floor. Almost no stopping power what so ever.
View 2 Replies
