BCAA at the tow mentioned that there was no electrical firing when I turned the key, as a result I purchased a new cam shaft sensor and installed today but the problem still persists. I 'm thinking I need to get the other half of the sensor that plugs into its female part, but am uncertain if there are any other potential possibilities to the problem at hand.
View 4 RepliesBeen having issues the past month with the car taking a couple times to start. It's very sporadic. Sometimes I'll only have this issues once a week. Sometimes once every other day.
Engine cranks it's just not firing. Almost like what would happen if you were out of gas. Sometimes it takes 2-3 times. Just yesterday it took about 5-6 times. Once started though the car seems fine. Drives fine, haven't really noticed any hesitation nor has it died while driving.
1.6 automatic
130,000 miles
no CEL on
new plugs at 100,000 miles
Changed the fuel filter when i noticed it happening and ran some fuel treatment cleaner in it.
We took it into the shop and of course every time they checked it out it started up fine. even left the car there for 2 days and started up fine for them. They said they couldn't really diagnose it as it seems ok to them.
Fuel pump going bad? Fuel pressure regulator going bad? Crankshaft position sensor going bad?
I have a 2000 Hyundai Accent hatchback with 98k miles. About a month ago we were headed out of town and got gas about a mile away from the house. After filling up, the car wouldn't start. It would crank but not fire. Tried for about 15mins to no avail. Had it towed to local mechanic and it started right away. They kept it for the weekend and said they had no problems starting it, so without experiencing the problem they said they would just be throwing parts at it.
About 2 weeks after my wife drove to store and when she went to leave and same experience, but this time it started after trying for a couple of mins. Then just this Tuesday it wouldn't start in the morning. When it just cranks but not fire it shows a pending P0335 (crankshaft position sensor). So I ordered the part (won't arrive til Friday). When I got home I tried to start it as well to no avail; tried again Wednesday morning and evening, nothing. Then this morning (Thursday) it starts right up. Once its started it runs great. After recurrence of no start 2 weeks ago, I replaced spark plugs and spark plug wires.
So my wife drove her car all day yesterday, everything fine. This morning went to start and it wouldn't. It turns over fine just not firing.
Now during the summer I had replace the fuel pump/filter before discovering that was not the issue.
I know you are already thinking CPS!.. I replaced that over the summer.
I have not checked the spark yet, kinda hard to do that one by yourself.
Beyond spark I am not sure what else could be wrong, especially because it was running fine last night. Is it common for accents to have issues in 20 degree weather?
I hear hissing noise when my car A/C is turned on. I have show it in Firestone and the person is like everything seems fine. I do not understand the reason. But the A/C works without any issues.
The hissing noise can be heard everyday when i turn on my A/C initially and later in between i can hear 2 -3 times a day when i go to my office.
I got a problem with me partners accent 2003 hatchback, after she filled up with fuel and turned the air-con on the speedo didn't work like it read 0, but while driving and turning the aircon off speedo started working again..... What was wrong or happened? as now it wont do it....it works fine??
View 2 RepliesSo the lights work fine don't dim when trying to start the car. when you turn the ignition there is one thump but no clicks or revs like belts are moving. The battery is fairly new less than a year and as mentioned all electric things seem to be fine. I was also told by the tow guy that it was the starter but just want to be sure.
Advanced auto states they will test it but I need to get it out of the car. Only problem is I cant find it. I've looked at the manual online and seen numerous diagrams but I don't know the physical location of it do I need to get under the car to remove it? Do i need to remove anything to get to it? I haven't seen any live pictures showing where it is and I've googled it for a while now.
My 2004 Dodge Stratus with 2.7l V6 has been good to me, now up over 140K miles. Lately, though (twice), I drove it a under a mile, shut it off, and when I returned to it could not get it to start. It turned over just fine, but didn't seem to be firing. When I returned several hours later, it started, running roughly for awhile. Once it smoothed out, it ran just fine, and I've had no other problems. My mechanic had a similar problem with a Dodge pickup of the same year, and it turned out to be the crankshaft sensor. Is there anything else we should be suspecting?
View 6 RepliesSo heres the deal 1989 civic dx hatchback 106k on the odometer automatic 1.5l d15b2 engine . It's been having delayed starts taking 3 to 6 cranks before firing up then running fine, suddenly it dawned on me maybe it was the distributor , so I swapped it with a spare I had because sure enough the old one had red death red dust in the cap. Cleaned the contacts set the timing reassembled, some wires broke on the back of the wiring harness to the distro. Rewired them, the car kept getting worse I jumped it and took it to my friend a vw mechanic it drove 49 miles there fine after the jump, new plugs new wires new fuel filter we did the wire job set the timing checked the timing belt got the battery tested and the alternators new and did a oil change also did a coolant flush a few weeks ago.
It started right up drove it back to Chicago , in the morning I was getting off the highway it stopped running no noises I pulled over 8 cranks later it started parked it 3 blocks away, went to test drive it when I stopped at a light it shut off cramming it and hitting the gas pedal got it to start drove it a block down it shut off at a stop sign and I parked it. What it is I'm throwing code 8 which is a top dead sensor which I think is in the distro which I replaced a month ago. Fuel pump sounds like its priming but you have to gas it and crank it to start it which is odd for a automatic , it is girk injected is this tds sensor going to do that by itself? Or could it be a ignition module? ( what I read online) starter? Main relay , fuel pump switch?
I recently attempted to change out the clutch on my bug for the first time. All went well right up until I tried to start it. The starter kicks over, all the electrical works, but for some reason she's not firing. Upon removing the spark plug i found out there is no spark. The plug cables and plugs themselves are brand new, so I'm guessing that's not it.
View 7 RepliesSitting in my living room I noticed that suddenly my headlights on my 97 Subaru ob turned on. First thought was someone was stealing my pos. Knife in hand I went to investigate. No one there. The keys were in the car, in the off position. The headlights all of a sudden turned off. I noticed that the dash lights were flickering on and off. I removed the keys yet the dash lights remained on. Not wanting my battery drained I disconnected the positive cable, which obviously corrected the issue for the time being. When I was disconnecting the battery I heard a mechanical whirring noise coming from the passenger side of the car just behind the headlight. Have never heard this noise before. NOT the intake fan or the AC. Did not investigate extensively due to darkness, wind and rain.
View 11 RepliesMy tcm is reading codes p707, p734, p732, p745, p1529. Little information ive gathered is that my transmission only slips while OD is on and it only slips the first time it tries to reach 2nd and 4th gears after it slips the rest of the drive it shifts fine it also feels sluggish in OD as far as acceleration. I'd like to solve it with out replacing the tranny cause.
View 4 RepliesEvery time I fill up my gas and put the hands free nozzle switch it clicks every time.
View 5 RepliesMy 2002 Accent sometimes struggles to start. It is generally a great reliable car and has a great service history. About 8 months ago I notice that two or three times it wouldnt start on first or second turn of the key. I got a service and the problem disappeared until recently again. Every so often (once a week or so) it will struggle to start and I will have to wait a few seconds before trying again, where it does fire up.
This is not a battery problem as I put a new battery in it 2 days ago. The fuel pump noise when turning the key also comes on. Could this simply be that the Spark Plugs ned changing? It has driven 5,000 miles since it's last service.
By the way, when I say struggles to start, it will turn over absolutely normally, but it will not ignite and actually start the engine, or "fire" up.
I have a '02 Accent with a 1.6L. Over the summer the A/C blew ice cold. I changed all the belts and after a few weeks I noticed that whenever I turned on the heat or A/C the car squeaked. After that I saw that the compressor would stop spinning whenever the squeaks happen. I sprayed the pulley and clutch with silicone spray and it worked great for a day then the same problem again. Eventually I snapped the A/C belt, replaced the idler pulley, and the tensioner bolt but still the same problem. What it could be?
View 1 RepliesThe car is a 2002 Accent GL LC ...
Here's my problem, The brake lights will not come on at all.
I've checked all the fuses, they're fine. Same with all the globes. I can't source a wiring diagram anywhere so I just started looking for faults.
I started with the pedal switch. There is no power getting to it at all but it earths fine. I thought the feed from the battery could be severed so I fed 12v straight to it. The switch works, but the lights are still not getting power.
To follow any of the wires in either direction from the switch, it looks like I'll have to remove the dash and that's really something I don't want to attempt without a good reason.
I have an 02 Accent 1.5L that has a misfire on #3. I have replaced the head gasket, valve cover and gasket, intake gasket, timing belt, yes it was top dead center, MAF, Charcoal canister sensor, MAF, plugs, wires, coil pack, injector #3, and the compression in #3 is 130. What else to check. No other codes.
View 3 RepliesSo it finally happened...One day she was working just fine and now is dead. OK, starter is working, battery is new but there's absolutely no spark on any of the spark plugs. I wonder what could it be ?
View 8 Repliesi have a 2002 accent 4 door and it's stuck in park, its an automatic. I removed the park override little cover thingy next to the shifter and released it out of park but when I put it back in it got stuck again.
View 5 RepliesI have a 2002 Hyundai Accent 1.6L automatic. I just bought it today. It has 171,000 miles. The car is misfiring. It does it when I give it gas. It won't misfire if I only give a little gas but if I was to drive it then it spits and sputters. I put new wires on. what are some common things on these cars. I am new to a Hyundai.
View 3 RepliesI have an 02 Accent 1.6L that has about 190,000km on it. It is now misfiring under low rpm's (anything under 2000) and the engine light will flash and then go off after about 5 seconds. Once the engine light went on and stayed on but I got the code read and reset it. The code was P 0303 Cylinder 3 misfire. I replaced the coil pack since that is apparently the common cause of this issue.
No luck with the new coil pack still have the same problem. I started smelling gas about 1000km ago so I assume that it is burning rich and putting raw fuel into the engine. My spark plugs are under 10,000km new and the wires show no signs of any problems. My next thought was to buy a new MAF sensor and hope that is the issue.
What this could be? FWIW the engine seems to run a little better for about 5km after using a throttle body clean on the TB. It also runs minimally better when I use a Lucas fuel additive.